lkml.org 
[lkml]   [2021]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] serial: 8250: Add UART_CAP_NOTEMT on PORT_16550A_FSL64
On Thu, Feb 04, 2021 at 11:11:57AM -0500, Eric Tremblay wrote:
> This port doesn't have an interrupt on TEMT available when using

s/This port/Port on Freescale ... (or what is that?)/

> the FIFO mode.

With amended commit message
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Eric Tremblay <etremblay@distech-controls.com>
> ---
> drivers/tty/serial/8250/8250_port.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 00c2cb64e8a7..dd904f736c61 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -262,7 +262,7 @@ static const struct serial8250_config uart_config[] = {
> .tx_loadsz = 63,
> .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
> UART_FCR7_64BYTE,
> - .flags = UART_CAP_FIFO,
> + .flags = UART_CAP_FIFO | UART_CAP_NOTEMT,
> },
> [PORT_RT2880] = {
> .name = "Palmchip BK-3103",
> --
> 2.17.1
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2021-10-01 13:51    [W:0.157 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site