lkml.org 
[lkml]   [2021]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/5] platform/x86: Add Intel Software Defined Silicon driver
From
Date
On Fri, 2021-10-01 at 09:29 +0200, Greg KH wrote:
> On Thu, Sep 30, 2021 at 06:28:15PM -0700, David E. Box wrote:
> > +static long sdsi_device_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> > +{
> > +       struct miscdevice *miscdev = file->private_data;
> > +       struct sdsi_priv *priv = to_sdsi_priv(miscdev);
> > +       void __user *argp = (void __user *)arg;
> > +       long ret = -EINVAL;
> > +
> > +       if (!priv->dev_present)
> > +               return -ENODEV;
> > +
> > +       if (!priv->sdsi_enabled)
> > +               return -EPERM;
> > +
> > +       if (cmd == SDSI_IF_READ_STATE)
> > +               return sdsi_if_read_state_cert(priv, argp);
> > +
> > +       mutex_lock(&priv->akc_lock);
> > +       switch (cmd) {
> > +       case SDSI_IF_PROVISION_AKC:
> > +               /*
> > +                * While writing an authentication certificate disallow other openers
> > +                * from using AKC or CAP.
> > +                */
> > +               if (!priv->akc_owner)
> > +                       priv->akc_owner = file;
> > +
> > +               if (priv->akc_owner != file) {
>
> Please explain how this test would ever trigger and how you tested it?
>
> What exactly are you trying to protect from here?  If userspace has your
> file descriptor, it can do whatever it wants, don't try to be smarter
> than it as you will never win.
>
> And why are you using ioctls at all here?  As you are just
> reading/writing to the hardware directly, why not just use a binary
> sysfs file to be that pipe?  What requires an ioctl at all?

So an original internal version of this did use binary attributes. But there was concern during
review that a flow, particularly when doing the two write operations, could not be handled
atomically while exposed as separate files. Above is the attempt to handle the situation in the
ioctl. That is, whichever opener performs AKC write first would lock out all other openers from
performing any write until that file is closed. This is to avoid interfering with that process,
should the opener also decide to perform a CAP operation.

There may be future commands requiring RW ioctls as well.

David

>
> thanks,
>
> greg k-h


\
 
 \ /
  Last update: 2021-10-01 13:15    [W:0.723 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site