lkml.org 
[lkml]   [2021]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
Date
Add bindings for the Awinic AW9523/AW9523B I2C GPIO Expander driver.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
.../pinctrl/awinic,aw9523-pinctrl.yaml | 111 ++++++++++++++++++
1 file changed, 111 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml
new file mode 100644
index 000000000000..1352b3adb566
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/awinic,aw9523-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW9523/AW9523B I2C GPIO Expander
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+ The Awinic AW9523/AW9523B I2C GPIO Expander featuring 16 multi-function
+ I/O, 256 steps PWM mode and interrupt support.
+
+properties:
+ compatible:
+ const: awinic,aw9523-pinctrl
+
+ reg:
+ maxItems: 1
+
+ '#gpio-cells':
+ description: |
+ Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-controller: true
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+ description: Specifies the INTN pin IRQ.
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in
+ this subnode.
+ items:
+ pattern: "^gpio([0-9]|1[0-5])$"
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the
+ specified pins.
+
+ enum: [ gpio, pwm ]
+
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ drive-open-drain: true
+ drive-push-pull: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c_node {
+ gpio-expander@58 {
+ compatible = "awinic,aw9523-pinctrl";
+ reg = <0x58>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <50 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 16>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.29.2
\
 
 \ /
  Last update: 2021-01-09 15:04    [W:0.133 / U:1.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site