lkml.org 
[lkml]   [2021]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] media: ov8856: Fix Bayer format dependance on mode
Hey Tomasz & Andrey,

On Fri, 8 Jan 2021 at 11:46, Andrey Konovalov
<andrey.konovalov@linaro.org> wrote:
>
> Hi Robert and Tomasz,
>
> On 08.01.2021 12:49, Tomasz Figa wrote:
> > Hi Robert,
> >
> > On Thu, Jan 7, 2021 at 11:21 PM Robert Foss <robert.foss@linaro.org> wrote:
> >>
> >> The Bayer GRBG10 mode used for earlier modes 3280x2460 and
> >> 1640x1232 isn't the mode output by the sensor for the
> >> 3264x2448 and 1632x1224 modes.
> >>
> >> Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10
> >> for 3264x2448 & 1632x1224 modes.
> >>
> >> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> >> ---
> >>
> >> Changes since v1:
> >> - Sakari: Added mode information to ov8856_mode struct
> >> - Sakari: enum_mbus_code updated
> >>
> >> drivers/media/i2c/ov8856.c | 24 ++++++++++++++++++------
> >> 1 file changed, 18 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
> >> index 2f4ceaa80593..7cd83564585c 100644
> >> --- a/drivers/media/i2c/ov8856.c
> >> +++ b/drivers/media/i2c/ov8856.c
> >> @@ -126,6 +126,9 @@ struct ov8856_mode {
> >>
> >> /* Sensor register settings for this resolution */
> >> const struct ov8856_reg_list reg_list;
> >> +
> >> + /* MEDIA_BUS_FMT for this mode */
> >> + u32 code;
> >> };
> >>
> >> static const struct ov8856_reg mipi_data_rate_720mbps[] = {
> >> @@ -942,6 +945,11 @@ static const char * const ov8856_test_pattern_menu[] = {
> >> "Bottom-Top Darker Color Bar"
> >> };
> >>
> >> +static const u32 ov8856_formats[] = {
> >> + MEDIA_BUS_FMT_SBGGR10_1X10,
> >> + MEDIA_BUS_FMT_SGRBG10_1X10,
> >> +};
> >> +
> >> static const s64 link_freq_menu_items[] = {
> >> OV8856_LINK_FREQ_360MHZ,
> >> OV8856_LINK_FREQ_180MHZ
> >> @@ -974,6 +982,7 @@ static const struct ov8856_mode supported_modes[] = {
> >> .regs = mode_3280x2464_regs,
> >> },
> >> .link_freq_index = OV8856_LINK_FREQ_720MBPS,
> >> + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> >> },
> >> {
> >> .width = 3264,
> >> @@ -986,6 +995,7 @@ static const struct ov8856_mode supported_modes[] = {
> >> .regs = mode_3264x2448_regs,
> >> },
> >> .link_freq_index = OV8856_LINK_FREQ_720MBPS,
> >> + .code = MEDIA_BUS_FMT_SBGGR10_1X10,
> >> },
> >> {
> >> .width = 1640,
> >> @@ -998,6 +1008,7 @@ static const struct ov8856_mode supported_modes[] = {
> >> .regs = mode_1640x1232_regs,
> >> },
> >> .link_freq_index = OV8856_LINK_FREQ_360MBPS,
> >> + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> >> },
> >> {
> >> .width = 1632,
> >> @@ -1010,6 +1021,7 @@ static const struct ov8856_mode supported_modes[] = {
> >> .regs = mode_1632x1224_regs,
> >> },
> >> .link_freq_index = OV8856_LINK_FREQ_360MBPS,
> >> + .code = MEDIA_BUS_FMT_SBGGR10_1X10,
> >> }
> >> };
> >>
> >> @@ -1281,8 +1293,8 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,
> >> {
> >> fmt->width = mode->width;
> >> fmt->height = mode->height;
> >> - fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> >> fmt->field = V4L2_FIELD_NONE;
> >> + fmt->code = mode->code;
> >> }
> >>
> >> static int ov8856_start_streaming(struct ov8856 *ov8856)
> >> @@ -1519,11 +1531,10 @@ static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,
> >> struct v4l2_subdev_pad_config *cfg,
> >> struct v4l2_subdev_mbus_code_enum *code)
> >> {
> >> - /* Only one bayer order GRBG is supported */
> >> - if (code->index > 0)
> >> + if (code->index >= ARRAY_SIZE(ov8856_formats))
> >> return -EINVAL;
> >>
> >> - code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> >> + code->code = ov8856_formats[code->index];
> >>
> >> return 0;
> >> }
> >> @@ -1532,10 +1543,11 @@ static int ov8856_enum_frame_size(struct v4l2_subdev *sd,
> >> struct v4l2_subdev_pad_config *cfg,
> >> struct v4l2_subdev_frame_size_enum *fse)
> >> {
> >> - if (fse->index >= ARRAY_SIZE(supported_modes))
> >> + if ((fse->code != ov8856_formats[0]) &&
> >> + (fse->code != ov8856_formats[1]))
> >
> > Shouldn't this be validated against the current mode? I guess it's the
> > question about which part of the state takes precedence - the mbus
> > code or the frame size.
>
> The docs [1] say "enumerate all frame sizes supported by a sub-device on the given pad
> for the given media bus format". It doesn't seem to mention the current mode. But the
> frame sizes reported should be filtered by the mbus code, and this patch misses that
> if I read it correct.

I was trying to grok this, and looking at the other sensor drivers
didn't provide much
guidance so your input is very welcome.

>
> But this situation when the mbus code depends on the mode (on the resolution in fact)...
> Yes, if we read the pixels from a rectangle smaller than the active area, we can change
> the bayer order by moving this "read-out" rectangle by one pixel along x, y, or both x
> and y axes. But wouldn't it be better if we try to review the register setting for the
> current modes so that the bayer order would be the same for all the modes?
>
> Thanks,
> Andrey
>
> > Best regards,
> > Tomasz
> >
>
> [1] https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/vidioc-subdev-enum-frame-size.html

\
 
 \ /
  Last update: 2021-01-08 15:59    [W:0.088 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site