lkml.org 
[lkml]   [2021]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2 9/9] arm64: dts: renesas: beacon: Increase sdhi speeds
Hi Adam,

On Thu, Dec 24, 2020 at 6:05 PM Adam Ford <aford173@gmail.com> wrote:
> The eMMC can run at hs400 and the WiFi chip can run at sdr104.
> Set the respective flags to push the sdhi faster.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
> +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
> @@ -271,8 +271,9 @@ &scif2 {
> };
>
> &sdhi2 {
> - pinctrl-names = "default";
> pinctrl-0 = <&sdhi2_pins>;
> + pinctrl-1 = <&sdhi2_pins>;
> + pinctrl-names = "default", "state_uhs";
> bus-width = <4>;
> vmmc-supply = <&reg_3p3v>;
> vqmmc-supply = <&reg_1p8v>;
> @@ -281,6 +282,8 @@ &sdhi2 {
> pm-ignore-notify;
> keep-power-in-suspend;
> mmc-pwrseq = <&wlan_pwrseq>;
> + sd-uhs-sdr50;
> + sd-uhs-sdr104;
> status = "okay";
> #address-cells = <1>;
> #size-cells = <0>;

The HS400 change was accidentally part of "[PATCH V2 5/9] arm64: dts:
renesas: beacon: Cleanup USB References":

| @@ -315,16 +306,12 @@ &sdhi3 {
| vmmc-supply = <&reg_3p3v>;
| vqmmc-supply = <&reg_1p8v>;
| bus-width = <8>;
| - mmc-hs200-1_8v;
| + mmc-hs400-1_8v;
| non-removable;
| fixed-emmc-driver-type = <1>;
| status = "okay";

You probably want to keep, not replace, the "mmc-hs200-1_8v" property,
though.

With that fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2021-01-08 15:05    [W:0.102 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site