lkml.org 
[lkml]   [2021]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
On Fri, Jan 8, 2021 at 1:22 AM Tony Lindgren <tony@atomide.com> wrote:
>
> * H. Nikolaus Schaller <hns@goldelico.com> [201230 13:29]:
> > > Am 30.12.2020 um 13:55 schrieb Adam Ford <aford173@gmail.com>:
> > > On Wed, Dec 30, 2020 at 2:43 AM Tony Lindgren <tony@atomide.com> wrote:
> > >>
> > >> At least for 4430, trying to use the single conversion mode eventually
> > >> hangs the thermal sensor. This can be quite easily seen with errors:
> > >>
> > >> thermal thermal_zone0: failed to read out thermal zone (-5)
> ...
>
> > > I don't have an OMAP4, but if you want, I can test a DM3730.
> >
> > Indeed I remember a similar discussion from the DM3730 [1]. temp values were
> > always those from the last measurement. E.g. the first one was done
> > during (cold) boot and the first request after 10 minutes did show a
> > quite cold system... The next one did show a hot system independent
> > of what had been between (suspend or high activity).
> >
> > It seems as if it was even reproducible with a very old kernel on a BeagleBoard.
> > So it is quite fundamental.
> >
> > We tried to fix it but did not come to a solution [2]. So we opened an issue
> > in our tracker [3] and decided to stay with continuous conversion although this
> > raises idle mode processor load.
>
> Hmm so maybe eocz high always times out in single mode since it also
> triggers at least on dra7?
>
> Yes it would be great if you guys can the $subject patch a try at
> least on your omap36xx and omap5 boards and see if you see eocz
> time out warnings in dmesg.

I should be able to try it on the dm3730 logicpd-torpedo kit this weekend.

adam
>
> Regards,
>
> Tony

\
 
 \ /
  Last update: 2021-01-08 14:48    [W:0.092 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site