lkml.org 
[lkml]   [2021]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 00/17] Add support for SDM845 Camera Subsystem
Date
This series implements support for the camera subsystem found in
the SDM845 SOCs and the Titan 170 ISP. The support is partial
in that it implements CSIPHY, CSID, and partial VFE support.

The Titan generation of the ISP diverges a fair amount from the
design of the previous architecture generation, CAMSS. As a result
some pretty invasive refactoring is done in this series. It also
means that at this time we're unable to implement support for all
of the IP blocks contained. This is due to a combination of legal
considerations with respect to the IP and its owner Qualcomm and
time & man hour constrains on the Linaro side.

The CSIPHY (CSI Physical Layer) & CSID (CSI Decoder) support is
complete, but the VFE (Video Front End, which is referred to as IFE
(Image Front End) in the Titan generation of ISPs) only has support
for the RDI (Raw Dump Interface) which allows the raw output of
the CSID to be written to memory.

The 2nd interface implemented in the VFE silicon is the PIX
interface, and camss does not support it for this generation of ISPs.
The reason for this is that the PIX interface is used for sending
image data to the BPS (Bayer Processing Section) & IPE (Image
Processing Engine), but both of these units are beyond the scope
of enabling basic ISP functionality for the SDM845.

Since the Titan architecture generation diverges quite a bit from
the CAMSS generation, a lot of pretty major refactoring is carried
out in this series. Both the CSID & VFE core paths are made more
general and hardware version specific parts are broken out.
The CSIPHY didn't require quite as radical changes and therefore
keeps its current form.

Tested on:
- Qcom RB3 / db845c + camera mezzanine, which is SDM845 based
- db410c + D3 Camera mezzanine, which is APQ8016 based

Branch:
- https://git.linaro.org/people/robert.foss/linux.git/log/?h=camss_sdm845_v1


Robert Foss (17):
media: camss: Fix comment using wrong function name
media: camss: Fix vfe_isr comment typo
media: camss: Add CAMSS_845 camss version
media: camss: Make ISPIF subdevice optional
media: camss: Refactor VFE HW version support
media: camss: Add support for VFE hardware version Titan 170
media: camss: Add missing format identifiers
media: camss: Refactor CSID HW version support
media: camss: Add support for CSID hardware version Titan 170
media: camss: Add support for CSIPHY hardware version Titan 170
media: camss: Remove per VFE power domain toggling
media: dt-bindings: media: qcom,camss: Add bindings for SDM845 camss
media: camss: Enable SDM845
arm64: defconfig: Build Qcom CAMSS as module
arm64: dts: sdm845: Add CAMSS ISP node
arm64: dts: sdm845-db845c: Add CAMSS ISP node
arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP

.../devicetree/bindings/media/qcom,camss.txt | 51 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 28 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 151 +++
arch/arm64/configs/defconfig | 1 +
drivers/media/platform/qcom/camss/Makefile | 6 +
.../platform/qcom/camss/camss-csid-170.c | 602 +++++++++
.../platform/qcom/camss/camss-csid-4-1.c | 338 +++++
.../platform/qcom/camss/camss-csid-4-7.c | 406 ++++++
.../media/platform/qcom/camss/camss-csid.c | 620 +--------
.../media/platform/qcom/camss/camss-csid.h | 177 ++-
.../qcom/camss/camss-csiphy-3ph-1-0.c | 182 ++-
.../media/platform/qcom/camss/camss-csiphy.c | 66 +-
.../media/platform/qcom/camss/camss-ispif.c | 147 ++-
.../media/platform/qcom/camss/camss-ispif.h | 3 +-
.../media/platform/qcom/camss/camss-vfe-170.c | 808 ++++++++++++
.../media/platform/qcom/camss/camss-vfe-4-1.c | 119 +-
.../media/platform/qcom/camss/camss-vfe-4-7.c | 240 ++--
.../media/platform/qcom/camss/camss-vfe-4-8.c | 1166 +++++++++++++++++
.../platform/qcom/camss/camss-vfe-gen1.c | 760 +++++++++++
.../platform/qcom/camss/camss-vfe-gen1.h | 110 ++
drivers/media/platform/qcom/camss/camss-vfe.c | 838 +-----------
drivers/media/platform/qcom/camss/camss-vfe.h | 118 +-
.../media/platform/qcom/camss/camss-video.c | 100 ++
drivers/media/platform/qcom/camss/camss.c | 421 ++++--
drivers/media/platform/qcom/camss/camss.h | 17 +-
25 files changed, 5630 insertions(+), 1845 deletions(-)
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-170.c
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-4-1.c
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-4-7.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-4-8.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-gen1.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-gen1.h

--
2.27.0

\
 
 \ /
  Last update: 2021-01-08 13:06    [W:0.159 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site