lkml.org 
[lkml]   [2021]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] phy: lantiq: rcu-usb2: wait after clock enable
Date
Commit 65dc2e725286 ("usb: dwc2: Update Core Reset programming flow.")
revealed that the phy isn't ready immediately after enabling it's
clocks. The dwc2_check_core_version() fails and the dwc2 usb driver
errors out.

Add a short delay to let the phy get up and running. There isn't any
documentation how much time is required, the value was chosen based on
tests.

Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Mathias Kresin <dev@kresin.me>
---
drivers/phy/lantiq/phy-lantiq-rcu-usb2.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index a7d126192cf1..29d246ea24b4 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -124,8 +124,16 @@ static int ltq_rcu_usb2_phy_power_on(struct phy *phy)
reset_control_deassert(priv->phy_reset);

ret = clk_prepare_enable(priv->phy_gate_clk);
- if (ret)
+ if (ret) {
dev_err(dev, "failed to enable PHY gate\n");
+ return ret;
+ }
+
+ /*
+ * at least the xrx200 usb2 phy requires some extra time to be
+ * operational after enabling the clock
+ */
+ usleep_range(100, 200);

return ret;
}
--
2.25.1
\
 
 \ /
  Last update: 2021-01-07 23:50    [W:0.050 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site