lkml.org 
[lkml]   [2021]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] clk: tegra30: Add hda clock default rates to clock driver
From
Date

On 25/12/2020 01:20, Peter Geis wrote:
> Current implementation defaults the hda clocks to clk_m.
> This causes hda to run too slow to operate correctly.
> Fix this by defaulting to pll_p and setting the frequency to the correct rate.
>
> This matches upstream t124 and downstream t30.
>
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> Tested-by: Ion Agorria <ion@agorria.com>
> ---
> drivers/clk/tegra/clk-tegra30.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
> index 37244a7e68c2..9cf249c344d9 100644
> --- a/drivers/clk/tegra/clk-tegra30.c
> +++ b/drivers/clk/tegra/clk-tegra30.c
> @@ -1256,6 +1256,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
> { TEGRA30_CLK_I2S3_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
> { TEGRA30_CLK_I2S4_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
> { TEGRA30_CLK_VIMCLK_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
> + { TEGRA30_CLK_HDA, TEGRA30_CLK_PLL_P, 102000000, 0 },
> + { TEGRA30_CLK_HDA2CODEC_2X, TEGRA30_CLK_PLL_P, 48000000, 0 },
> /* must be the last entry */
> { TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0 },
> };


This looks good to me. So ...

Acked-by: Jon Hunter <jonathanh@nvidia.com>

Cheers
Jon

--
nvpublic

\
 
 \ /
  Last update: 2021-01-05 11:15    [W:0.098 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site