lkml.org 
[lkml]   [2021]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] gpio: rcar: Remove redundant compatible values
Hi Prabhakar,

On Thu, Dec 31, 2020 at 4:31 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> The mandatory compatible values 'renesas,rcar-gen{1,2,3}-gpio' have been
> already added to all the respective R-Car Gen{1,2,3} SoC DTSI files,
> remove the redundant device specific values from the driver.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Thanks for your patch!

> --- a/drivers/gpio/gpio-rcar.c
> +++ b/drivers/gpio/gpio-rcar.c
> @@ -392,33 +392,6 @@ static const struct gpio_rcar_info gpio_rcar_info_gen2 = {
>
> static const struct of_device_id gpio_rcar_of_table[] = {
> {
> - .compatible = "renesas,gpio-r8a7743",
> - /* RZ/G1 GPIO is identical to R-Car Gen2. */
> - .data = &gpio_rcar_info_gen2,
> - }, {
> - .compatible = "renesas,gpio-r8a7790",
> - .data = &gpio_rcar_info_gen2,
> - }, {
> - .compatible = "renesas,gpio-r8a7791",
> - .data = &gpio_rcar_info_gen2,
> - }, {
> - .compatible = "renesas,gpio-r8a7792",
> - .data = &gpio_rcar_info_gen2,
> - }, {
> - .compatible = "renesas,gpio-r8a7793",
> - .data = &gpio_rcar_info_gen2,
> - }, {
> - .compatible = "renesas,gpio-r8a7794",
> - .data = &gpio_rcar_info_gen2,
> - }, {
> - .compatible = "renesas,gpio-r8a7795",
> - /* Gen3 GPIO is identical to Gen2. */
> - .data = &gpio_rcar_info_gen2,
> - }, {
> - .compatible = "renesas,gpio-r8a7796",
> - /* Gen3 GPIO is identical to Gen2. */
> - .data = &gpio_rcar_info_gen2,
> - }, {
> .compatible = "renesas,rcar-gen1-gpio",
> .data = &gpio_rcar_info_gen1,
> }, {

The reason the driver matches on these SoC-specific compatible values is
that originally the family-specific compatible values did not exist, and
the device nodes in the initial DTS files thus did not use them. The
family-specific compatible values were added to the DTS files in v4.15.
However, as this was backported to all v4.14-based R-Car BSP releases
(3.6.0 and later), I think it is safe to apply this.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2021-01-04 11:38    [W:0.088 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site