Messages in this thread Patch in this message |  | | From | Daniel Scally <> | | Subject | [PATCH] regulator: core.c: Replace references to non-existent function | | Date | Sun, 3 Jan 2021 16:55:41 +0000 |
| |
The function regulator_set_device_supply() is referenced a few times in comments in regulator/core.c; however this function was removed a long time ago by commit a5766f11cfd3 ("regulator: core - Rework machine API to remove string based functions."). Update those references to point to set_consumer_device_supply(), which replaced the old function.
Signed-off-by: Daniel Scally <djrscally@gmail.com> --- drivers/regulator/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index ca03d8e70bd1..fee924158091 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2020,7 +2020,7 @@ struct regulator *_regulator_get(struct device *dev, const char *id, * Returns a struct regulator corresponding to the regulator producer, * or IS_ERR() condition containing errno. * - * Use of supply names configured via regulator_set_device_supply() is + * Use of supply names configured via set_consumer_device_supply() is * strongly encouraged. It is recommended that the supply name used * should match the name used for the supply and/or the relevant * device pins in the datasheet. @@ -2047,7 +2047,7 @@ EXPORT_SYMBOL_GPL(regulator_get); * regulator off for correct operation of the hardware they are * controlling. * - * Use of supply names configured via regulator_set_device_supply() is + * Use of supply names configured via set_consumer_device_supply() is * strongly encouraged. It is recommended that the supply name used * should match the name used for the supply and/or the relevant * device pins in the datasheet. @@ -2073,7 +2073,7 @@ EXPORT_SYMBOL_GPL(regulator_get_exclusive); * disrupting the operation of drivers that can handle absent * supplies. * - * Use of supply names configured via regulator_set_device_supply() is + * Use of supply names configured via set_consumer_device_supply() is * strongly encouraged. It is recommended that the supply name used * should match the name used for the supply and/or the relevant * device pins in the datasheet. -- 2.25.1
|  |