lkml.org 
[lkml]   [2021]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND] ata: ahci_brcm: Add back regulators management
Date
While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.

Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/ata/ahci_brcm.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 49f7acbfcf01..5b32df5d33ad 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -377,6 +377,10 @@ static int __maybe_unused brcm_ahci_resume(struct device *dev)
if (ret)
return ret;

+ ret = ahci_platform_enable_regulators(hpriv);
+ if (ret)
+ goto out_disable_clks;
+
brcm_sata_init(priv);
brcm_sata_phys_enable(priv);
brcm_sata_alpm_init(hpriv);
@@ -406,6 +410,8 @@ static int __maybe_unused brcm_ahci_resume(struct device *dev)
ahci_platform_disable_phys(hpriv);
out_disable_phys:
brcm_sata_phys_disable(priv);
+ ahci_platform_disable_regulators(hpriv);
+out_disable_clks:
ahci_platform_disable_clks(hpriv);
return ret;
}
@@ -490,6 +496,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (ret)
goto out_reset;

+ ret = ahci_platform_enable_regulators(hpriv);
+ if (ret)
+ goto out_disable_clks;
+
/* Must be first so as to configure endianness including that
* of the standard AHCI register space.
*/
@@ -499,7 +509,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
if (!priv->port_mask) {
ret = -ENODEV;
- goto out_disable_clks;
+ goto out_disable_regulators;
}

/* Must be done before ahci_platform_enable_phys() */
@@ -524,6 +534,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
ahci_platform_disable_phys(hpriv);
out_disable_phys:
brcm_sata_phys_disable(priv);
+out_disable_regulators:
+ ahci_platform_disable_regulators(hpriv);
out_disable_clks:
ahci_platform_disable_clks(hpriv);
out_reset:
--
2.25.1
\
 
 \ /
  Last update: 2021-01-29 19:32    [W:0.131 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site