lkml.org 
[lkml]   [2021]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] serial: 8250: remove UART_CAP_TEMT on PORT_16550A_FSL64
From
Date
On 2021-01-29 6:25 a.m., Andy Shevchenko wrote:
> On Thu, Jan 28, 2021 at 06:36:29PM -0500, Eric Tremblay wrote:
>> That port does not have an interrupt on TEMT when using
>> the FIFO mode.
> This is wrong.
> 1. You have to guarantee that TEMT is set for all UARTs before this patch
> 2. World is not staying on OF only platforms
>
> NAK

Considering the use of the reversed capability UART_CAP_NOTEMT should I set
the flag directly in uart_config like:

[PORT_16550A_FSL64] = {
.name = "16550A_FSL64",
.fifo_size = 64,
.tx_loadsz = 63,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
UART_FCR7_64BYTE,
.flags = UART_CAP_FIFO | UART_CAP_NOTEMT,
},

>

\
 
 \ /
  Last update: 2021-01-29 19:06    [W:0.168 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site