lkml.org 
[lkml]   [2021]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V7 5/6] of: unittest: Create overlay_common.dtsi and testcases_common.dtsi
Date
In order to build-test the same unit-test files using fdtoverlay tool,
move the device nodes from the existing overlay_base.dts and
testcases_common.dts files to .dtsi counterparts. The .dts files now
include the new .dtsi files, resulting in exactly the same behavior as
earlier.

The .dtsi files can now be reused for compile time tests using
fdtoverlay (will be done by a later commit).

This is required because the base files passed to fdtoverlay tool
shouldn't be overlays themselves (i.e. shouldn't have the /plugin/;
tag).

Note that this commit also moves "testcase-device2" node to
testcases.dts from tests-interrupts.dtsi, as this node has a deliberate
error in it and is only relevant for runtime testing done with
unittest.c.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/of/unittest-data/overlay_base.dts | 90 +-----------------
drivers/of/unittest-data/overlay_common.dtsi | 91 +++++++++++++++++++
drivers/of/unittest-data/testcases.dts | 18 ++--
.../of/unittest-data/testcases_common.dtsi | 19 ++++
.../of/unittest-data/tests-interrupts.dtsi | 7 --
5 files changed, 118 insertions(+), 107 deletions(-)
create mode 100644 drivers/of/unittest-data/overlay_common.dtsi
create mode 100644 drivers/of/unittest-data/testcases_common.dtsi

diff --git a/drivers/of/unittest-data/overlay_base.dts b/drivers/of/unittest-data/overlay_base.dts
index 99ab9d12d00b..ab9014589c5d 100644
--- a/drivers/of/unittest-data/overlay_base.dts
+++ b/drivers/of/unittest-data/overlay_base.dts
@@ -2,92 +2,4 @@
/dts-v1/;
/plugin/;

-/*
- * Base device tree that overlays will be applied against.
- *
- * Do not add any properties in node "/".
- * Do not add any nodes other than "/testcase-data-2" in node "/".
- * Do not add anything that would result in dtc creating node "/__fixups__".
- * dtc will create nodes "/__symbols__" and "/__local_fixups__".
- */
-
-/ {
- testcase-data-2 {
- #address-cells = <1>;
- #size-cells = <1>;
-
- electric_1: substation@100 {
- compatible = "ot,big-volts-control";
- reg = < 0x00000100 0x100 >;
- status = "disabled";
-
- hvac_1: hvac-medium-1 {
- compatible = "ot,hvac-medium";
- heat-range = < 50 75 >;
- cool-range = < 60 80 >;
- };
-
- spin_ctrl_1: motor-1 {
- compatible = "ot,ferris-wheel-motor";
- spin = "clockwise";
- rpm_avail = < 50 >;
- };
-
- spin_ctrl_2: motor-8 {
- compatible = "ot,roller-coaster-motor";
- };
- };
-
- rides_1: fairway-1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ot,rides";
- status = "disabled";
- orientation = < 127 >;
-
- ride@100 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ot,roller-coaster";
- reg = < 0x00000100 0x100 >;
- hvac-provider = < &hvac_1 >;
- hvac-thermostat = < 29 > ;
- hvac-zones = < 14 >;
- hvac-zone-names = "operator";
- spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
- spin-controller-names = "track_1", "track_2";
- queues = < 2 >;
-
- track@30 {
- reg = < 0x00000030 0x10 >;
- };
-
- track@40 {
- reg = < 0x00000040 0x10 >;
- };
-
- };
- };
-
- lights_1: lights@30000 {
- compatible = "ot,work-lights";
- reg = < 0x00030000 0x1000 >;
- status = "disabled";
- };
-
- lights_2: lights@40000 {
- compatible = "ot,show-lights";
- reg = < 0x00040000 0x1000 >;
- status = "disabled";
- rate = < 13 138 >;
- };
-
- retail_1: vending@50000 {
- reg = < 0x00050000 0x1000 >;
- compatible = "ot,tickets";
- status = "disabled";
- };
-
- };
-};
-
+#include "overlay_common.dtsi"
diff --git a/drivers/of/unittest-data/overlay_common.dtsi b/drivers/of/unittest-data/overlay_common.dtsi
new file mode 100644
index 000000000000..08874a72556e
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_common.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Base device tree that overlays will be applied against.
+ *
+ * Do not add any properties in node "/".
+ * Do not add any nodes other than "/testcase-data-2" in node "/".
+ * Do not add anything that would result in dtc creating node "/__fixups__".
+ * dtc will create nodes "/__symbols__" and "/__local_fixups__".
+ */
+
+/ {
+ testcase-data-2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ electric_1: substation@100 {
+ compatible = "ot,big-volts-control";
+ reg = < 0x00000100 0x100 >;
+ status = "disabled";
+
+ hvac_1: hvac-medium-1 {
+ compatible = "ot,hvac-medium";
+ heat-range = < 50 75 >;
+ cool-range = < 60 80 >;
+ };
+
+ spin_ctrl_1: motor-1 {
+ compatible = "ot,ferris-wheel-motor";
+ spin = "clockwise";
+ rpm_avail = < 50 >;
+ };
+
+ spin_ctrl_2: motor-8 {
+ compatible = "ot,roller-coaster-motor";
+ };
+ };
+
+ rides_1: fairway-1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ot,rides";
+ status = "disabled";
+ orientation = < 127 >;
+
+ ride@100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ot,roller-coaster";
+ reg = < 0x00000100 0x100 >;
+ hvac-provider = < &hvac_1 >;
+ hvac-thermostat = < 29 > ;
+ hvac-zones = < 14 >;
+ hvac-zone-names = "operator";
+ spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
+ spin-controller-names = "track_1", "track_2";
+ queues = < 2 >;
+
+ track@30 {
+ reg = < 0x00000030 0x10 >;
+ };
+
+ track@40 {
+ reg = < 0x00000040 0x10 >;
+ };
+
+ };
+ };
+
+ lights_1: lights@30000 {
+ compatible = "ot,work-lights";
+ reg = < 0x00030000 0x1000 >;
+ status = "disabled";
+ };
+
+ lights_2: lights@40000 {
+ compatible = "ot,show-lights";
+ reg = < 0x00040000 0x1000 >;
+ status = "disabled";
+ rate = < 13 138 >;
+ };
+
+ retail_1: vending@50000 {
+ reg = < 0x00050000 0x1000 >;
+ compatible = "ot,tickets";
+ status = "disabled";
+ };
+
+ };
+};
+
diff --git a/drivers/of/unittest-data/testcases.dts b/drivers/of/unittest-data/testcases.dts
index a85b5e1c381a..04b9e7bb30d9 100644
--- a/drivers/of/unittest-data/testcases.dts
+++ b/drivers/of/unittest-data/testcases.dts
@@ -2,19 +2,15 @@
/dts-v1/;
/plugin/;

+#include "testcases_common.dtsi"
+
/ {
testcase-data {
- changeset {
- prop-update = "hello";
- prop-remove = "world";
- node-remove {
- };
+ testcase-device2 {
+ compatible = "testcase-device";
+ interrupt-parent = <&test_intc2>;
+ interrupts = <1>; /* invalid specifier - too short */
};
};
+
};
-#include "tests-phandle.dtsi"
-#include "tests-interrupts.dtsi"
-#include "tests-match.dtsi"
-#include "tests-address.dtsi"
-#include "tests-platform.dtsi"
-#include "tests-overlay.dtsi"
diff --git a/drivers/of/unittest-data/testcases_common.dtsi b/drivers/of/unittest-data/testcases_common.dtsi
new file mode 100644
index 000000000000..19292bbb4cbb
--- /dev/null
+++ b/drivers/of/unittest-data/testcases_common.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ testcase-data {
+ changeset {
+ prop-update = "hello";
+ prop-remove = "world";
+ node-remove {
+ };
+ };
+ };
+};
+
+#include "tests-phandle.dtsi"
+#include "tests-interrupts.dtsi"
+#include "tests-match.dtsi"
+#include "tests-address.dtsi"
+#include "tests-platform.dtsi"
+#include "tests-overlay.dtsi"
diff --git a/drivers/of/unittest-data/tests-interrupts.dtsi b/drivers/of/unittest-data/tests-interrupts.dtsi
index ec175e800725..0e5914611107 100644
--- a/drivers/of/unittest-data/tests-interrupts.dtsi
+++ b/drivers/of/unittest-data/tests-interrupts.dtsi
@@ -61,12 +61,5 @@ testcase-device1 {
interrupt-parent = <&test_intc0>;
interrupts = <1>;
};
-
- testcase-device2 {
- compatible = "testcase-device";
- interrupt-parent = <&test_intc2>;
- interrupts = <1>; /* invalid specifier - too short */
- };
};
-
};
--
2.25.0.rc1.19.g042ed3e048af
\
 
 \ /
  Last update: 2021-01-29 08:31    [W:0.227 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site