Messages in this thread | | | Date | Fri, 29 Jan 2021 10:41:59 +0530 | From | mdalam@codeauro ... | Subject | Re: [PATCH V3] mtd: rawnand: qcom: update last code word register |
| |
On 2021-01-28 13:22, Manivannan Sadhasivam wrote: > On Sun, Jan 10, 2021 at 09:31:45AM +0530, Md Sadre Alam wrote: >> From QPIC version 2.0 onwards new register got added to >> read last codeword. This change will update the same. >> >> For first three code word READ_LOCATION_n register will be >> use.For last code word READ_LOCATION_LAST_CW_n register will be >> use. >> >> Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org> > > I gave this patch a try on SDX55 board but not able to resolve an issue > and > I think it is related to reading the last code word which this patch is > trying > to address. For my patch on supporting QPIC v2 IP, I tested with > SDX55-MTP board > and I never hit any issue. But on my new dev board (Telit FN980), there > seems to > be an issue while populating the partitions and tracing down that bug > lands me > in copy_last_cw() function. > > The issue only happens while creating the 3rd partition on Telit board > whose > size differs when compared with MTP. The board just reboots into QDL > mode > whenever it tries to read the last code word. > > Below is the snippet of partition layout: > > Telit partitions: > > [ 1.082015] 0: sbl offs=0x00000000 size=0x0000000a attr:0x000000ff > [ 1.082702] 1: mibib offs=0x0000000a size=0x0000000a attr:0x000000ff > [ 1.083488] 2: ico offs=0x00000014 size=0x00000014 attr:0x000000ff > [ 1.084572] 3: efs2 offs=0x00000028 size=0x0000002c attr:0x000000ff > [ 1.085316] 4: tz offs=0x00000054 size=0x00000007 attr:0x000000ff > [ 1.086089] 5: tz_devcfg offs=0x0000005b size=0x00000004 > attr:0x000000ff > .... > > MTP partitions: > > [ 1.573871] 0: sbl offs=0x00000000 size=0x0000000a attr:0x000000ff > [ 1.581139] 1: mibib offs=0x0000000a size=0x0000000a attr:0x000000ff > [ 1.587362] 2: efs2 offs=0x00000014 size=0x0000002c attr:0x000000ff > [ 1.593853] 3: tz offs=0x00000040 size=0x00000007 attr:0x000000ff > [ 1.599860] 4: tz_devcfg offs=0x00000047 size=0x00000004 > attr:0x000000ff > ... > > So until I figure this out, please keep this patch on hold!
There was some corner case I missed in V3 patch. I have fixed this in V4 patch. I have done some tress testing as well with V4 patch on IPQ5018 platform using "nand-utils" and "mtd_test.ko" , Now its working fine. Can you test with V4 patch once. > > Thanks, > Mani > >> --- >> [V3] >> * Added else condition for last code word in update_rw_regs(). >> drivers/mtd/nand/raw/qcom_nandc.c | 84 >> ++++++++++++++++++++++++++++++++------- >> 1 file changed, 70 insertions(+), 14 deletions(-) >> >> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c >> b/drivers/mtd/nand/raw/qcom_nandc.c >> index 667e4bf..50ff6e3 100644 >> --- a/drivers/mtd/nand/raw/qcom_nandc.c >> +++ b/drivers/mtd/nand/raw/qcom_nandc.c >> @@ -48,6 +48,10 @@ >> #define NAND_READ_LOCATION_1 0xf24 >> #define NAND_READ_LOCATION_2 0xf28 >> #define NAND_READ_LOCATION_3 0xf2c >> +#define NAND_READ_LOCATION_LAST_CW_0 0xf40 >> +#define NAND_READ_LOCATION_LAST_CW_1 0xf44 >> +#define NAND_READ_LOCATION_LAST_CW_2 0xf48 >> +#define NAND_READ_LOCATION_LAST_CW_3 0xf4c >> >> /* dummy register offsets, used by write_reg_dma */ >> #define NAND_DEV_CMD1_RESTORE 0xdead >> @@ -187,6 +191,12 @@ nandc_set_reg(nandc, >> NAND_READ_LOCATION_##reg, \ >> ((size) << READ_LOCATION_SIZE) | \ >> ((is_last) << READ_LOCATION_LAST)) >> >> +#define nandc_set_read_loc_last(nandc, reg, offset, size, is_last) \ >> +nandc_set_reg(nandc, NAND_READ_LOCATION_LAST_CW_##reg, \ >> + ((offset) << READ_LOCATION_OFFSET) | \ >> + ((size) << READ_LOCATION_SIZE) | \ >> + ((is_last) << READ_LOCATION_LAST)) >> + >> /* >> * Returns the actual register address for all NAND_DEV_ registers >> * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and >> NAND_DEV_CMD_VLD) >> @@ -316,6 +326,10 @@ struct nandc_regs { >> __le32 read_location1; >> __le32 read_location2; >> __le32 read_location3; >> + __le32 read_location_last0; >> + __le32 read_location_last1; >> + __le32 read_location_last2; >> + __le32 read_location_last3; >> >> __le32 erased_cw_detect_cfg_clr; >> __le32 erased_cw_detect_cfg_set; >> @@ -644,6 +658,14 @@ static __le32 *offset_to_nandc_reg(struct >> nandc_regs *regs, int offset) >> return ®s->read_location2; >> case NAND_READ_LOCATION_3: >> return ®s->read_location3; >> + case NAND_READ_LOCATION_LAST_CW_0: >> + return ®s->read_location_last0; >> + case NAND_READ_LOCATION_LAST_CW_1: >> + return ®s->read_location_last1; >> + case NAND_READ_LOCATION_LAST_CW_2: >> + return ®s->read_location_last2; >> + case NAND_READ_LOCATION_LAST_CW_3: >> + return ®s->read_location_last3; >> default: >> return NULL; >> } >> @@ -719,9 +741,14 @@ static void update_rw_regs(struct qcom_nand_host >> *host, int num_cw, bool read) >> nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus); >> nandc_set_reg(nandc, NAND_EXEC_CMD, 1); >> >> - if (read) >> - nandc_set_read_loc(nandc, 0, 0, host->use_ecc ? >> - host->cw_data : host->cw_size, 1); >> + if (read) { >> + if (nandc->props->qpic_v2) >> + nandc_set_read_loc_last(nandc, 0, 0, host->use_ecc ? >> + host->cw_data : host->cw_size, 1); >> + else >> + nandc_set_read_loc(nandc, 0, 0, host->use_ecc ? >> + host->cw_data : host->cw_size, 1); >> + } >> } >> >> /* >> @@ -1096,9 +1123,13 @@ static void config_nand_page_read(struct >> qcom_nand_controller *nandc) >> static void >> config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc) >> { >> - if (nandc->props->is_bam) >> + if (nandc->props->is_bam) { >> + if (nandc->props->qpic_v2) >> + write_reg_dma(nandc, NAND_READ_LOCATION_LAST_CW_0, >> + 1, NAND_BAM_NEXT_SGL); >> write_reg_dma(nandc, NAND_READ_LOCATION_0, 4, >> NAND_BAM_NEXT_SGL); >> + } >> >> write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); >> write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); >> @@ -1633,16 +1664,28 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, >> struct nand_chip *chip, >> } >> >> if (nandc->props->is_bam) { >> - nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0); >> + if (nandc->props->qpic_v2 && cw == (ecc->steps - 1)) >> + nandc_set_read_loc_last(nandc, 0, read_loc, data_size1, 0); >> + else >> + nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0); >> read_loc += data_size1; >> >> - nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0); >> + if (nandc->props->qpic_v2 && cw == (ecc->steps - 1)) >> + nandc_set_read_loc_last(nandc, 1, read_loc, oob_size1, 0); >> + else >> + nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0); >> read_loc += oob_size1; >> >> - nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0); >> + if (nandc->props->qpic_v2 && cw == (ecc->steps - 1)) >> + nandc_set_read_loc_last(nandc, 2, read_loc, data_size2, 0); >> + else >> + nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0); >> read_loc += data_size2; >> >> - nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1); >> + if (nandc->props->qpic_v2 && cw == (ecc->steps - 1)) >> + nandc_set_read_loc_last(nandc, 3, read_loc, oob_size2, 0); >> + else >> + nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1); >> } >> >> config_nand_cw_read(nandc, false); >> @@ -1873,14 +1916,27 @@ static int read_page_ecc(struct qcom_nand_host >> *host, u8 *data_buf, >> >> if (nandc->props->is_bam) { >> if (data_buf && oob_buf) { >> - nandc_set_read_loc(nandc, 0, 0, data_size, 0); >> - nandc_set_read_loc(nandc, 1, data_size, >> - oob_size, 1); >> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1)) { >> + nandc_set_read_loc_last(nandc, 0, 0, data_size, 0); >> + nandc_set_read_loc_last(nandc, 1, data_size, >> + oob_size, 1); >> + } else { >> + nandc_set_read_loc(nandc, 0, 0, data_size, 0); >> + nandc_set_read_loc(nandc, 1, data_size, >> + oob_size, 1); >> + } >> } else if (data_buf) { >> - nandc_set_read_loc(nandc, 0, 0, data_size, 1); >> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1)) >> + nandc_set_read_loc_last(nandc, 0, 0, data_size, 1); >> + else >> + nandc_set_read_loc(nandc, 0, 0, data_size, 1); >> } else { >> - nandc_set_read_loc(nandc, 0, data_size, >> - oob_size, 1); >> + if (nandc->props->qpic_v2 && i == (ecc->steps - 1)) >> + nandc_set_read_loc_last(nandc, 0, data_size, >> + oob_size, 1); >> + else >> + nandc_set_read_loc(nandc, 0, data_size, >> + oob_size, 1); >> } >> } >> >> -- >> 2.7.4 >>
| |