lkml.org 
[lkml]   [2021]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] gpiolib: cdev: clear debounce period if line set to output
On Thu, Jan 21, 2021 at 3:11 PM Kent Gibson <warthog618@gmail.com> wrote:
>
> When set_config changes a line from input to output debounce is
> implicitly disabled, as debounce makes no sense for outputs, but the
> debounce period is not being cleared and is still reported in the
> line info.
>
> So clear the debounce period when the debouncer is stopped in
> edge_detector_stop().
>
> Fixed: 65cff7047640 ("gpiolib: cdev: support setting debounce")

The actual hash for this commit is 65cff7046406 - I fixed that locally.

Patch applied for fixes, thanks!

Bartosz

> Signed-off-by: Kent Gibson <warthog618@gmail.com>
> ---
> drivers/gpio/gpiolib-cdev.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
> index 12b679ca552c..3551aaf5a361 100644
> --- a/drivers/gpio/gpiolib-cdev.c
> +++ b/drivers/gpio/gpiolib-cdev.c
> @@ -776,6 +776,8 @@ static void edge_detector_stop(struct line *line)
> cancel_delayed_work_sync(&line->work);
> WRITE_ONCE(line->sw_debounced, 0);
> WRITE_ONCE(line->eflags, 0);
> + if (line->desc)
> + WRITE_ONCE(line->desc->debounce_period_us, 0);
> /* do not change line->level - see comment in debounced_value() */
> }
>
> --
> 2.30.0
>

\
 
 \ /
  Last update: 2021-01-27 16:37    [W:0.092 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site