lkml.org 
[lkml]   [2021]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ARM: dts: exynos: use Exynos5420 dedicated USB2 PHY compatible
On Tue, Jan 26, 2021 at 11:44:26PM +0100, Arnd Bergmann wrote:
> On Fri, Nov 20, 2020 at 12:10 PM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
> > On 20.11.2020 12:05, Krzysztof Kozlowski wrote:
> > > On Fri, Nov 20, 2020 at 09:56:37AM +0100, Marek Szyprowski wrote:
> > >> USB2.0 PHY in Exynos5420 differs from Exynos5250 variant a bit, so use the
> > >> recently introduced dedicated compatible for Exynos5420.
> > >>
> > >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> > >> ---
> > >> arch/arm/boot/dts/exynos54xx.dtsi | 6 +++---
> > >> 1 file changed, 3 insertions(+), 3 deletions(-)
> > >>
> > >> diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
> > >> index fe9d34c23374..2ddb7a5f12b3 100644
> > >> --- a/arch/arm/boot/dts/exynos54xx.dtsi
> > >> +++ b/arch/arm/boot/dts/exynos54xx.dtsi
> > >> @@ -188,7 +188,7 @@
> > >> compatible = "samsung,exynos4210-ehci";
> > >> reg = <0x12110000 0x100>;
> > >> interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> > >> - phys = <&usb2_phy 1>;
> > >> + phys = <&usb2_phy 0>;
> > >> phy-names = "host";
> > >> };
> > >>
> > >> @@ -196,12 +196,12 @@
> > >> compatible = "samsung,exynos4210-ohci";
> > >> reg = <0x12120000 0x100>;
> > >> interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> > >> - phys = <&usb2_phy 1>;
> > >> + phys = <&usb2_phy 0>;
> > >> phy-names = "host";
> > >> };
> > >>
> > >> usb2_phy: phy@12130000 {
> > >> - compatible = "samsung,exynos5250-usb2-phy";
> > >> + compatible = "samsung,exynos5420-usb2-phy";
> > > The DTS change will wait till PHY driver adjustements get merged... or
> > > if the difference is not critical, maybe using both compatibles (5420
> > > and 5250) would have sense?
> >
> > It won't work easily with both compatibles, because in the 5420 variant
> > I've also changed the PHY indices (5420 has no device and second hsic
> > phy). IMHO the dts change can wait for the next release.
>
> I see this made it into the pull request now, but I had not been aware
> of the change earlier, and I'm slightly annoyed to have received it this
> way:
>
> - This is clearly an incompatible change to the dtb, and you all
> noticed that because it would cause a bisection problem. As
> a general rule, if a dts change does not work across bisection,
> we should not merge it at all, because it causes problems for
> anyone with external dts or dtb files.

Hi Arnd,

No, it does not create a bisection problem. The driver change adding new
compatible is already in v5.11-rc1.

>
> - It would likely have been possible to define the new binding in
> a backward-compatible way. I don't see a reason why the index
> values in the binding had to change here, other than a slight
> inconvenience for the driver.

It does not matter since it's a new compatible and old one is not
affected. Nothing got broken before this patch, nothing got broken after
applying it via samsung-soc. No backwards compatibility is affected.

>
> - If the change was really unavoidable, I would have expected
> a long explanation about why it had to be done in both the
> commit message and in the tag description for the pull
> request.
>
> I've dropped the pull request for now, maybe this can still
> be sorted out with another driver change that makes the
> new compatible string backward-compatible.

It's a different hardware. New hardware does not have to be compatible
with old hardware. However old DTB is still doing fine (although with
the original issue not fixed).

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2021-01-27 09:33    [W:0.090 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site