lkml.org 
[lkml]   [2021]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/5] clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL
Date
From: Vivek Aknurwar <viveka@codeaurora.org>

Lucid 5LPE is a slightly different Lucid PLL with different offsets and
porgramming sequence so add support for these

Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
[vkoul: rebase and tidy up for upstream]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/clk/qcom/clk-alpha-pll.c | 173 +++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 4 +
2 files changed, 177 insertions(+)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index a30ea7b09224..c6eb99169ddc 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
/* LUCID PLL specific settings and offsets */
#define LUCID_PCAL_DONE BIT(27)

+/* LUCID 5LPE PLL specific settings and offsets */
+#define LUCID_5LPE_PCAL_DONE BIT(11)
+#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH BIT(13)
+#define LUCID_5LPE_PLL_LATCH_INPUT BIT(14)
+#define LUCID_5LPE_ENABLE_VOTE_RUN BIT(21)
+
#define pll_alpha_width(p) \
((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ? \
ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
@@ -1604,3 +1610,170 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
.set_rate = clk_alpha_pll_agera_set_rate,
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
+
+static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ u32 val;
+ int ret;
+
+ ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+ if (ret)
+ return ret;
+
+ /* If in FSM mode, just vote for it */
+ if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
+ ret = clk_enable_regmap(hw);
+ if (ret)
+ return ret;
+ return wait_for_pll_enable_lock(pll);
+ }
+
+ /* Check if PLL is already enabled, return if enabled */
+ ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+ if (ret)
+ return ret;
+
+ regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
+
+ ret = wait_for_pll_enable_lock(pll);
+ if (ret)
+ return ret;
+
+ /* Enable the PLL outputs */
+ ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
+ if (ret)
+ return ret;
+
+ /* Enable the global PLL outputs */
+ return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
+}
+
+static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ u32 val;
+ int ret;
+
+ ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+ if (ret)
+ return;
+
+ /* If in FSM mode, just unvote it */
+ if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
+ clk_disable_regmap(hw);
+ return;
+ }
+
+ /* Disable the global PLL output */
+ ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+ if (ret)
+ return;
+
+ /* Disable the PLL outputs */
+ ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
+ if (ret)
+ return;
+
+ /* Place the PLL mode in STANDBY */
+ regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
+}
+
+/*
+ * The Lucid 5LPE PLL requires a power-on self-calibration which happens
+ * when the PLL comes out of reset. Calibrate in case it is not completed.
+ */
+static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ struct clk_hw *p;
+ u32 val = 0;
+ int ret;
+
+ /* Return early if calibration is not needed. */
+ regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
+ if (val & LUCID_5LPE_PCAL_DONE)
+ return 0;
+
+ p = clk_hw_get_parent(hw);
+ if (!p)
+ return -EINVAL;
+
+ ret = alpha_pll_lucid_5lpe_enable(hw);
+ if (ret)
+ return ret;
+
+ alpha_pll_lucid_5lpe_disable(hw);
+
+ return 0;
+}
+
+static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long prate)
+{
+ return __alpha_pll_trion_set_rate(hw, rate, prate,
+ LUCID_5LPE_PLL_LATCH_INPUT,
+ LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
+}
+
+static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+ int i, val = 0, div, ret;
+ u32 mask;
+
+ /*
+ * If the PLL is in FSM mode, then treat set_rate callback as a
+ * no-operation.
+ */
+ ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+ if (ret)
+ return ret;
+
+ if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
+ return 0;
+
+ div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
+ for (i = 0; i < pll->num_post_div; i++) {
+ if (pll->post_div_table[i].div == div) {
+ val = pll->post_div_table[i].val;
+ break;
+ }
+ }
+
+ mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
+ return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
+ mask, val << pll->post_div_shift);
+}
+
+const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
+ .prepare = alpha_pll_lucid_5lpe_prepare,
+ .enable = alpha_pll_lucid_5lpe_enable,
+ .disable = alpha_pll_lucid_5lpe_disable,
+ .is_enabled = clk_trion_pll_is_enabled,
+ .recalc_rate = clk_trion_pll_recalc_rate,
+ .round_rate = clk_alpha_pll_round_rate,
+ .set_rate = alpha_pll_lucid_5lpe_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
+
+const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
+ .enable = alpha_pll_lucid_5lpe_enable,
+ .disable = alpha_pll_lucid_5lpe_disable,
+ .is_enabled = clk_trion_pll_is_enabled,
+ .recalc_rate = clk_trion_pll_recalc_rate,
+ .round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
+
+const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
+ .recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+ .round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+ .set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 0ea30d2f3da1..6943e933be0f 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -144,6 +144,10 @@ extern const struct clk_ops clk_alpha_pll_lucid_ops;
extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
extern const struct clk_ops clk_alpha_pll_agera_ops;

+extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
+
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
--
2.26.2
\
 
 \ /
  Last update: 2021-01-27 08:15    [W:0.057 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site