lkml.org 
[lkml]   [2021]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 184/199] pinctrl: qcom: No need to read-modify-write the interrupt status
Date
From: Douglas Anderson <dianders@chromium.org>

commit 4079d35fa4fca4ee0ffd66968312fc86a5e8c290 upstream.

When the Qualcomm pinctrl driver wants to Ack an interrupt, it does a
read-modify-write on the interrupt status register. On some SoCs it
makes sure that the status bit is 1 to "Ack" and on others it makes
sure that the bit is 0 to "Ack". Presumably the first type of
interrupt controller is a "write 1 to clear" type register and the
second just let you directly set the interrupt status register.

As far as I can tell from scanning structure definitions, the
interrupt status bit is always in a register by itself. Thus with
both types of interrupt controllers it is safe to "Ack" interrupts
without doing a read-modify-write. We can do a simple write.

It should be noted that if the interrupt status bit _was_ ever in a
register with other things (like maybe status bits for other GPIOs):
a) For "write 1 clear" type controllers then read-modify-write would
be totally wrong because we'd accidentally end up clearing
interrupts we weren't looking at.
b) For "direct set" type controllers then read-modify-write would also
be wrong because someone setting one of the other bits in the
register might accidentally clear (or set) our interrupt.
I say this simply to show that the current read-modify-write doesn't
provide any sort of "future proofing" of the code. In fact (for
"write 1 clear" controllers) the new code is slightly more "future
proof" since it would allow more than one interrupt status bits to
share a register.

NOTE: this code fixes no bugs--it simply avoids an extra register
read.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.2.I3635de080604e1feda770591c5563bd6e63dd39d@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)

--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -791,16 +791,13 @@ static void msm_gpio_irq_clear_unmask(st

raw_spin_lock_irqsave(&pctrl->lock, flags);

- if (status_clear) {
- /*
- * clear the interrupt status bit before unmask to avoid
- * any erroneous interrupts that would have got latched
- * when the interrupt is not in use.
- */
- val = msm_readl_intr_status(pctrl, g);
- val &= ~BIT(g->intr_status_bit);
- msm_writel_intr_status(val, pctrl, g);
- }
+ /*
+ * clear the interrupt status bit before unmask to avoid
+ * any erroneous interrupts that would have got latched
+ * when the interrupt is not in use.
+ */
+ if (status_clear)
+ msm_writel_intr_status(0, pctrl, g);

val = msm_readl_intr_cfg(pctrl, g);
val |= BIT(g->intr_raw_status_bit);
@@ -905,11 +902,7 @@ static void msm_gpio_irq_ack(struct irq_

raw_spin_lock_irqsave(&pctrl->lock, flags);

- val = msm_readl_intr_status(pctrl, g);
- if (g->intr_ack_high)
- val |= BIT(g->intr_status_bit);
- else
- val &= ~BIT(g->intr_status_bit);
+ val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
msm_writel_intr_status(val, pctrl, g);

if (test_bit(d->hwirq, pctrl->dual_edge_irqs))

\
 
 \ /
  Last update: 2021-01-26 11:06    [W:0.643 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site