lkml.org 
[lkml]   [2021]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/3] dt-bindings:drm/bridge:anx7625:add HDCP support flag and swing reg
On Mon, Jan 25, 2021 at 07:12:21PM +0800, Xin Ji wrote:
> Add 'bus-type' and 'data-lanes' define for port0, add HDCP support
> flag and DP tx lane0 and lane1 swing register array define.
>
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
> .../bindings/display/bridge/analogix,anx7625.yaml | 57 ++++++++++++++++++++--
> 1 file changed, 54 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index 60585a4..3b1cbe0 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -34,23 +34,69 @@ properties:
> description: used for reset chip control, RESET_N pin B7.
> maxItems: 1
>
> + analogix,lane0-swing:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description:
> + an array of swing register setting for DP tx lane0 PHY, please don't
> + add this property, or contact vendor.
> +
> + analogix,lane1-swing:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description:
> + an array of swing register setting for DP tx lane1 PHY, please don't
> + add this property, or contact vendor.
> +
> + analogix,hdcp-support:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: indicate the DP tx HDCP support or not.

Sounds like a boolean.

> +
> ports:
> type: object
> + additionalProperties: false
>
> properties:
> port@0:
> type: object
> description:
> - Video port for MIPI DSI input.
> + Video port for MIPI input.

You're going to need to rebase this one drm-misc-next which uses the
graph schema now.

> +
> + properties:
> + endpoint:
> + type: object
> + additionalProperties: false
> +
> + # Properties described in
> + # Documentation/devicetree/bindings/media/video-interfaces.txt
> + properties:
> + remote-endpoint: true
> + bus-type: true
> + data-lanes: true
> +
> + required:
> + - remote-endpoint
> +
> + required:
> + - endpoint
>
> port@1:
> type: object
> description:
> Video port for panel or connector.
>
> + properties:
> + endpoint:
> + type: object
> + additionalProperties: false
> +
> + required:
> + - remote-endpoint
> +
> + required:
> + - endpoint
> +
> required:
> - - port@0
> - - port@1
> + - port@0
> + - port@1
>
> required:
> - compatible
> @@ -73,6 +119,10 @@ examples:
> enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
>
> + analogix,lane0-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> + analogix,lane1-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> + analogix,hdcp-support = <0>;
> +
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -81,6 +131,7 @@ examples:
> reg = <0>;
> anx7625_in: endpoint {
> remote-endpoint = <&mipi_dsi>;
> + bus-type = <5>;
> };
> };
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2021-01-26 08:18    [W:0.106 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site