lkml.org 
[lkml]   [2021]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] cmd_dtc: Enable generation of device tree symbols
From
Date
+frank

On 1/26/21 2:43 AM, Geert Uytterhoeven wrote:
> Hi Uwe,
>
> On Tue, Jan 26, 2021 at 8:21 AM Uwe Kleine-König <uwe@kleine-koenig.org> wrote:
>> And then I learned with hints from Rob and Geert that symbols are not
>> really necessary for overlays, you just cannot use named labels. But
>> using
>>
>> target-path = "/soc/i2c@23473245";
>>
>> or
>>
>> target = <&{/soc/i2c@23473245}>;
>>
>> instead of
>>
>> target = <&i2c1>;
>>
>> works fine. (And if you need to add a phandle the &{/path/to/node}
>> construct should work, too (but I didn't test).) Using labels is a tad
>> nicer, but the problem I wanted to address with my patch now has a known
>> different solution.
>
> Please don't use "target" and "target-path". Since the introduction of
> sugar syntax support in v4.15[1], you can just use "&label", like in a normal
> DTS file. Paths do need the special "&{/path/to/node}" syntax instead
> of "/path/to/node", though.
>
> As usual, you can find lots of examples of DT overlays in my repo[2].
>
> [1] commit 4201d057ea91c3d6 ("scripts/dtc: Update to upstream version
> v1.4.5-3-gb1a60033c110")
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays
>
> Gr{oetje,eeting}s,
>
> Geert
>

\
 
 \ /
  Last update: 2021-01-26 19:21    [W:5.126 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site