lkml.org 
[lkml]   [2021]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH RFC 1/2] dt: pci: designware-pcie.txt: convert it to yaml
On Tue, Jan 26, 2021 at 1:35 AM Mauro Carvalho Chehab
<mchehab+huawei@kernel.org> wrote:
>
> Convert the file into a JSON description at the yaml format.

json-schema, not JSON really. I prefer just 'DT schema' which implies
json-schema in yaml file format.

This one is a bit tricky and suspect it needs a few others converted
to get right. Not asking for that yet, just keep that in mind.

>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../bindings/pci/amlogic,meson-pcie.txt | 4 +-
> .../bindings/pci/axis,artpec6-pcie.txt | 2 +-
> .../bindings/pci/designware,pcie.yaml | 194 ++++++++++++++++++

snps,dw-pcie.yaml

> .../bindings/pci/designware-pcie.txt | 77 -------
> .../bindings/pci/fsl,imx6q-pcie.txt | 2 +-
> .../bindings/pci/hisilicon-histb-pcie.txt | 2 +-
> .../bindings/pci/hisilicon-pcie.txt | 2 +-
> .../devicetree/bindings/pci/kirin-pcie.txt | 2 +-
> .../bindings/pci/layerscape-pci.txt | 2 +-
> .../bindings/pci/nvidia,tegra194-pcie.txt | 4 +-
> .../devicetree/bindings/pci/pci-armada8k.txt | 2 +-
> .../devicetree/bindings/pci/pci-keystone.txt | 10 +-
> .../devicetree/bindings/pci/pcie-al.txt | 2 +-
> .../devicetree/bindings/pci/qcom,pcie.txt | 14 +-
> .../bindings/pci/samsung,exynos5440-pcie.txt | 4 +-
> .../pci/socionext,uniphier-pcie-ep.yaml | 2 +-
> .../devicetree/bindings/pci/ti-pci.txt | 4 +-
> .../devicetree/bindings/pci/uniphier-pcie.txt | 2 +-
> MAINTAINERS | 2 +-
> 19 files changed, 225 insertions(+), 108 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/designware,pcie.yaml
> delete mode 100644 Documentation/devicetree/bindings/pci/designware-pcie.txt


> diff --git a/Documentation/devicetree/bindings/pci/designware,pcie.yaml b/Documentation/devicetree/bindings/pci/designware,pcie.yaml
> new file mode 100644
> index 000000000000..e610ed073789
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/designware,pcie.yaml
> @@ -0,0 +1,194 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/designware,pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare PCIe interface
> +
> +maintainers:
> + - Jingoo Han <jingoohan1@gmail.com>
> + - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> +
> +description: |
> + Synopsys DesignWare PCIe host controller
> +
> +properties:
> + compatible:
> + description: |
> + The compatible can be either:
> + - snps,dw-pcie # for RC mode
> + - snps,dw-pcie-ep # For EP mode
> + or some other value, when there's a host-specific driver

Needs to be a schema. This is complicated because sometimes it's used
and sometimes not. So we need something like this:

anyOf:
- {}
- items:
contains:
enum:
- snps,dw-pcie
- snps,dw-pcie-ep

This will always be true, but at least documents the strings in a
parseable form.

> +
> + reg:
> + description: |
> + For designware cores version < 4.80 contains the configuration
> + address space. For designware core version >= 4.80, contains
> + the configuration and ATU address space

And DBI for all versions.


> + maxItems: 4

minItems: 2

(dbi and config must always be there)

> +
> + reg-names:
> + description: |
> + Must be "config" for the PCIe configuration space and "atu" for
> + the ATU address space.
> + (The old way of getting the configuration address space from
> + "ranges" is deprecated and should be avoided.)

This is getting dropped from the driver and can be dropped here. This
only existed for a few months back in 2013.

> + maxItems: 4

minItems: 2
items:
contains:
enum: [ dbi, dbi2, config, atu ]

> +
> + num-lanes:
> + description: |
> + number of lanes to use (this property should be specified unless
> + the link is brought already up in BIOS)
> + maxItems: 1

Not an array. IIRC, pci-bus.yaml covers this. If not, needs a type ref
and min/max (1-16).

> +
> + reset-gpio:
> + description: GPIO pin number of power good signal

Isn't this the PERST# signal?

> + maxItems: 1
> +
> + clocks:
> + description: |
> + Must contain an entry for each entry in clock-names.
> + See Documentation/devicetree/bindings/clock/clock-bindings.txt for
> + details.

This is every 'clocks', drop.

> + minItems: 2
> + maxItems: 8
> +
> + clock-names:
> + description: |
> + Must include the following entries:
> + - "pcie"
> + - "pcie_bus"

Need to be in a schema.

> + minItems: 2
> + maxItems: 8
> +
> + "snps,enable-cdm-check":
> + $ref: /schemas/types.yaml#definitions/flag
> + description: |
> + This is a boolean property and if present enables
> + automatic checking of CDM (Configuration Dependent Module) registers
> + for data corruption. CDM registers include standard PCIe configuration
> + space registers, Port Logic registers, DMA and iATU (internal Address
> + Translation Unit) registers.
> +

> + # The following are mandatory properties for RC Mode
> +
> + "#address-cells":
> + const: 3
> +
> + "#size-cells":
> + const: 2
> +
> + device_type:
> + const: pci
> +
> + ranges:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description: |
> + ranges for the PCI memory and I/O regions
> + minItems: 1
> + maxItems: 8
> +
> + "#interrupt-cells":
> + $ref: /schemas/types.yaml#/definitions/uint32
> + const: 1
> +
> + interrupt-map-mask:
> + description: |
> + Standard PCI properties to define the mapping of the PCIe
> + interface to interrupt numbers.
> +
> + interrupt-map:
> + description: |
> + Standard PCI properties to define the mapping of the PCIe
> + interface to interrupt numbers.

pci-bus.yaml already covers these. Drop and reference pci-bus.yaml

> +
> + # The following are optional properties for RC mode
> +
> + num-viewport:
> + description: |
> + number of view ports configured in hardware. If a platform
> + does not specify it, the driver assumes 2.

This is detected now and can be marked 'deprecated'.

> +
> + bus-range:
> + description: |
> + PCI bus numbers covered (it is recommended for new devicetrees
> + to specify this property, to keep backwards compatibility a range of
> + 0x00-0xff is assumed if not present)

Covered by pci-bus.yaml.

> +
> + # The following are mandatory properties for EP Mode
> +
> + num-ib-windows:
> + description: number of inbound address translation windows
> + maxItems: 1
> +
> + num-ob-windows:
> + description: number of outbound address translation windows
> + maxItems: 1

These 2 are detected now and can be marked 'deprecated'.

> +
> + # The following are optional properties for EP mode
> +
> + max-functions:
> + description: maximum number of functions that can be configured
> + maxItems: 1

Not an array.

> +
> +required:
> + - reg
> + - reg-names
> + - compatible
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: snps,dw-pcie
> + then:
> + required:
> + - compatible
> + - "#address-cells"
> + - "#size-cells"
> + - device_type
> + - ranges
> + - "#interrupt-cells"
> + - interrupt-map-mask
> + - interrupt-map

All these are required for all pci hosts.


> + - if:
> + properties:
> + compatible:
> + contains:
> + const: snps,dw-pcie-ep
> + then:
> + required:
> + - compatible
> + - num-ib-windows
> + - num-ob-windows
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + pcie: pcie@dfc00000 {
> + compatible = "snps,dw-pcie";
> + reg = <0xdfc00000 0x0001000>, /* IP registers */
> + <0xd0000000 0x0002000>; /* Configuration space */
> + reg-names = "dbi", "config";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
> + 0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
> + interrupts = <25>, <24>;
> + #interrupt-cells = <1>;
> + num-lanes = <1>;
> + };
> + pcie_ep: pcie_ep@dfd00000 {
> + compatible = "snps,dw-pcie-ep";
> + reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
> + <0xdfc01000 0x0001000>, /* IP registers 2 */
> + <0xd0000000 0x2000000>; /* Configuration space */
> + reg-names = "dbi", "dbi2", "addr_space";
> + num-ib-windows = <6>;
> + num-ob-windows = <2>;
> + num-lanes = <1>;
> + };

\
 
 \ /
  Last update: 2021-01-26 16:49    [W:2.377 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site