lkml.org 
[lkml]   [2021]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] optee: simplify i2c access
Date
From: Arnd Bergmann <arnd@arndb.de>

Storing a bogus i2c_client structure on the stack adds overhead and
causes a compile-time warning:

drivers/tee/optee/rpc.c:493:6: error: stack frame size of 1056 bytes in function 'optee_handle_rpc' [-Werror,-Wframe-larger-than=]
void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param,

Change the implementation of handle_rpc_func_cmd_i2c_transfer() to
open-code the i2c_transfer() call, which makes it easier to read
and avoids the warning.

Fixes: c05210ab9757 ("drivers: optee: allow op-tee to access devices on the i2c bus")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/tee/optee/rpc.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
index 1e3614e4798f..6cbb3643c6c4 100644
--- a/drivers/tee/optee/rpc.c
+++ b/drivers/tee/optee/rpc.c
@@ -54,8 +54,9 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
struct optee_msg_arg *arg)
{
- struct i2c_client client = { 0 };
struct tee_param *params;
+ struct i2c_adapter *adapter;
+ struct i2c_msg msg = { };
size_t i;
int ret = -EOPNOTSUPP;
u8 attr[] = {
@@ -85,48 +86,48 @@ static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
goto bad;
}

- client.adapter = i2c_get_adapter(params[0].u.value.b);
- if (!client.adapter)
+ adapter = i2c_get_adapter(params[0].u.value.b);
+ if (!adapter)
goto bad;

if (params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) {
- if (!i2c_check_functionality(client.adapter,
+ if (!i2c_check_functionality(adapter,
I2C_FUNC_10BIT_ADDR)) {
- i2c_put_adapter(client.adapter);
+ i2c_put_adapter(adapter);
goto bad;
}

- client.flags = I2C_CLIENT_TEN;
+ msg.flags = I2C_M_TEN;
}

- client.addr = params[0].u.value.c;
- snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr);
+ msg.addr = params[0].u.value.c;
+ msg.buf = params[2].u.memref.shm->kaddr;
+ msg.len = params[2].u.memref.size;

switch (params[0].u.value.a) {
case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD:
- ret = i2c_master_recv(&client, params[2].u.memref.shm->kaddr,
- params[2].u.memref.size);
+ msg.flags |= I2C_M_RD;
break;
case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR:
- ret = i2c_master_send(&client, params[2].u.memref.shm->kaddr,
- params[2].u.memref.size);
break;
default:
- i2c_put_adapter(client.adapter);
+ i2c_put_adapter(adapter);
goto bad;
}

+ ret = i2c_transfer(adapter, &msg, 1);
+
if (ret < 0) {
arg->ret = TEEC_ERROR_COMMUNICATION;
} else {
- params[3].u.value.a = ret;
+ params[3].u.value.a = msg.len;
if (optee_to_msg_param(arg->params, arg->num_params, params))
arg->ret = TEEC_ERROR_BAD_PARAMETERS;
else
arg->ret = TEEC_SUCCESS;
}

- i2c_put_adapter(client.adapter);
+ i2c_put_adapter(adapter);
kfree(params);
return;
bad:
--
2.29.2
\
 
 \ /
  Last update: 2021-01-26 07:25    [W:0.624 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site