lkml.org 
[lkml]   [2021]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
On Friday 15 January 2021 15:32:30 Mathias Nyman wrote:
> On 14.1.2021 1.20, Pali Rohár wrote:
> > On Thursday 24 December 2020 05:59:05 Peter Chen wrote:
> >> On 20-12-23 17:18:47, Pali Rohár wrote:
> >>> Currently init_quirk callbacks for xhci platform drivers are called
> >>> xhci_plat_setup() function which is called after chip reset completes.
> >>> It happens in the middle of the usb_add_hcd() function.
> >>>
> >>> But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe() function
> >>> prior calling usb_add_hcd() function. Therefore this XHCI_SKIP_PHY_INIT
> >>> currently does nothing as prior xhci_plat_setup() it is not set.
> >>>
> >>> Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization value
> >>> which really needs to be set prior calling usb_add_hcd() as this function
> >>> at its beginning skips PHY init if this member is set.
> >>>
> >>> This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by calling
> >>> init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
> >>> XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
> >>> priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.
> >>>
> >>> Signed-off-by: Pali Rohár <pali@kernel.org>
> >>>
> >>> ---
> >>> Changes in v2:
> >>> * Check also xhci->quirks as xhci_priv_init_quirk() callbacks are setting xhci->quirks
> >>> * Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720" patch
> >>> * Removed Fixes: line
> >>> ---
> >>> drivers/usb/host/xhci-plat.c | 16 ++++++++--------
> >>> 1 file changed, 8 insertions(+), 8 deletions(-)
> >>>
> >>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> >>> index 4d34f6005381..0eab7cb5a767 100644
> >>> --- a/drivers/usb/host/xhci-plat.c
> >>> +++ b/drivers/usb/host/xhci-plat.c
> >>> @@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
> >>> /* called during probe() after chip reset completes */
> >>> static int xhci_plat_setup(struct usb_hcd *hcd)
> >>> {
> >>> - int ret;
> >>> -
> >>> -
> >>> - ret = xhci_priv_init_quirk(hcd);
> >>> - if (ret)
> >>> - return ret;
> >>> -
> >>> return xhci_gen_setup(hcd, xhci_plat_quirks);
> >>> }
> >>>
> >>> @@ -330,7 +323,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
> >>>
> >>> hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> >>> xhci->shared_hcd->tpl_support = hcd->tpl_support;
> >>> - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
> >>> +
> >>> + if (priv) {
> >>> + ret = xhci_priv_init_quirk(hcd);
> >>> + if (ret)
> >>> + goto disable_usb_phy;
> >>> + }
> >>> +
> >>> + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)))
> >>> hcd->skip_phy_initialization = 1;
> >>
> >> I am not sure if others agree with you move the position of
> >> xhci_priv_init_quirk, Let's see Mathias opinion.
> >
> > Hello! Do you have an opinion how to handle this issue? As currently it
> > is needed for another patch which is fixing issue/regression in xhci-mvebu:
> > https://lore.kernel.org/linux-usb/20201223162403.10897-1-pali@kernel.org/
> >
>
> I can see the benefit in this.
> In the xhci-plat case usb_create_hcd and usb_add_hcd are separate steps, and
> we could both copy the xhci_plat_priv .quirks and run the .init_qurks before
> adding the hcd.
> I guess the current way is inherited from pci case where the earliest place
> to do this after hcd is created is the hcd->driver->reset callback (which is
> set to xhci_pci_setup() or xhci_plat_setup()).
>
> xhci-rcar.c is using the .init_quirk to load firmware, we need to check with
> them if this change is ok. (added Yoshihiro Shimoda to cc)

Yoshihiro, is this change OK?

Can we move forward? I really need to now how to handle regression in
xhci-mvebu driver. And one option is with this patch...

> Their firmware would be loaded before phy parts are initialized, usb bus
> registered, or roothub device allocated.
>
> Thanks
> -Mathias

\
 
 \ /
  Last update: 2021-01-26 03:53    [W:0.974 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site