lkml.org 
[lkml]   [2021]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RESEND PATCH v3 2/2] usb: dwc3: Add driver for Xilinx platforms
On Fri, Jan 22, 2021 at 01:06:22PM +0000, Manish Narani wrote:
>Hi Michael,
>
>> -----Original Message-----
>> From: Michael Grzeschik <mgr@pengutronix.de>
>> Sent: Friday, January 22, 2021 1:39 PM
>> To: Manish Narani <MNARANI@xilinx.com>
>> Cc: devicetree@vger.kernel.org; kernel@pengutronix.de; balbi@kernel.org;
>> gregkh@linuxfoundation.org; linux-usb@vger.kernel.org; Michal Simek
>> <michals@xilinx.com>; linux-kernel@vger.kernel.org; robh+dt@kernel.org;
>> git <git@xilinx.com>; p.zabel@pengutronix.de; linux-arm-
>> kernel@lists.infradead.org
>> Subject: Re: [RESEND PATCH v3 2/2] usb: dwc3: Add driver for Xilinx
>> platforms
>>
>> Hello!
>>
>> On Mon, Jan 18, 2021 at 02:42:24PM +0100, Michael Grzeschik wrote:
>> >Hi!
>> >
>> >On Tue, Dec 15, 2020 at 12:24:51PM +0530, Manish Narani wrote:
>> >>Add a new driver for supporting Xilinx platforms. This driver is used
>> >>for some sequence of operations required for Xilinx USB controllers.
>> >>This driver is also used to choose between PIPE clock coming from SerDes
>> >>and the Suspend Clock. Before the controller is out of reset, the clock
>> >>selection should be changed to PIPE clock in order to make the USB
>> >>controller work. There is a register added in Xilinx USB controller
>> >>register space for the same.
>> >
>> >I tried out this driver with the vanilla kernel on an zynqmp. Without
>> >this patch the USB-Gadget is already acting buggy. In the gadget mode,
>> >some iterations of plug/unplug results to an stalled gadget which will
>> >never come back without a reboot.
>> >
>> >With the corresponding code of this driver (reset assert, clk modify,
>> >reset deassert) in the downstream kernels phy driver we found out it is
>> >totaly stable. But using this exact glue driver which should do the same
>> >as the downstream code, the gadget still was buggy the way described
>> >above.
>> >
>> >I suspect the difference lays in the different order of operations.
>> >While the downstream code is runing the resets inside the phy driver
>> >which is powered and initialized in the dwc3-core itself. With this glue
>> >layser approach of this patch the whole phy init is done before even
>> >touching dwc3-core in any way. It seems not to have the same effect,
>> >though.
>> >
>> >If really the order of operations is limiting us, we probably need
>> >another solution than this glue layer. Any Ideas?
>>
>> I found out what the difference between the Downstream and this
>> Glue is. When using vanilla with this Glue code we may not set
>> the following bit:
>>
>> https://www.xilinx.com/html_docs/registers/ug1087/ug1087-zynq-
>> ultrascale-registers.html#usb3_regs___fpd_power_prsnt.html
>>
>> >>+ /* Set PIPE Power Present signal in FPD Power Present Register*/
>> >>+ writel(PIPE_POWER_ON, priv_data->regs +
>> XLNX_USB_FPD_POWER_PRSNT);
>>
>> When I comment this out, the link stays stable. This is different in
>> the Downstream Xilinx Kernel, where the bit is also set but has no
>> negativ effect.
>>
>> Manish, can you give me a pointer what to look for?
>> So setting this will also work with mainline?
>I am looking further on this but from what I see here is that,
>In order to make USB function properly, there are some dt changes needed in mainline for
>USB node which include defining clocks coming from serdes.
>The DT changes are pending to be sent to mainline.

Can you push that state somewhere, so I could test it?
Or is in the downstream kernel some things to copy?

>Can you share the DT settings for USB node on your side?

Here is my current configuration for the device node at usb0:

zynqmp.dtsi

zynqmp_reset: reset-controller {
compatible = "xlnx,zynqmp-reset";
#reset-cells = <1>;
};

usb0: usb@ff9d0000 {
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9d0000 0x0 0x100>;
clock-names = "bus_clk", "ref_clk";
power-domains = <&zynqmp_firmware PD_USB_0>;
ranges;
resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
<&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
<&zynqmp_reset ZYNQMP_RESET_USB0_APB>;
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;

usb0_dwc3: dwc3@fe200000 {
compatible = "snps,dwc3";
interrupt-parent = <&gic>;
interrupts = <0 65 4>;
clock-names = "ref", "bus_early", "suspend";
reg = <0x0 0xfe200000 0x0 0x40000>;
};
};

platform.dts

&usb0 {
status = "okay";
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
};

&usb0_dwc3 {
dr_mode = "peripheral";

/* The following quirks are required, since the bInterval is 1 and we
* handle steady ISOC streaming. See Usecase 3 in commit 729dcffd1ed3
* ("usb: dwc3: gadget: Add support for disabling U1 and U2 entries").
*/
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
};


>Meanwhile I will keep updating on the same.

Thanks, that sounds great!

Regards,
Michael

>> >>Signed-off-by: Manish Narani <manish.narani@xilinx.com>
>> >>---
>> >>drivers/usb/dwc3/Kconfig | 9 +
>> >>drivers/usb/dwc3/Makefile | 1 +
>> >>drivers/usb/dwc3/dwc3-of-simple.c | 1 -
>> >>drivers/usb/dwc3/dwc3-xilinx.c | 334
>> ++++++++++++++++++++++++++++++
>> >>4 files changed, 344 insertions(+), 1 deletion(-)
>> >>create mode 100644 drivers/usb/dwc3/dwc3-xilinx.c
>> >>
>> >>diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>> >>index 7a2304565a73..0e00e6dfccd8 100644
>> >>--- a/drivers/usb/dwc3/Kconfig
>> >>+++ b/drivers/usb/dwc3/Kconfig
>> >>@@ -139,4 +139,13 @@ config USB_DWC3_QCOM
>> >> for peripheral mode support.
>> >> Say 'Y' or 'M' if you have one such device.
>> >>
>> >>+config USB_DWC3_XILINX
>> >>+ tristate "Xilinx Platforms"
>> >>+ depends on (ARCH_ZYNQMP || ARCH_VERSAL) && OF
>> >>+ default USB_DWC3
>> >>+ help
>> >>+ Support Xilinx SoCs with DesignWare Core USB3 IP.
>> >>+ This driver handles both ZynqMP and Versal SoC operations.
>> >>+ Say 'Y' or 'M' if you have one such device.
>> >>+
>> >>endif
>> >>diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
>> >>index ae86da0dc5bd..add567578b1f 100644
>> >>--- a/drivers/usb/dwc3/Makefile
>> >>+++ b/drivers/usb/dwc3/Makefile
>> >>@@ -51,3 +51,4 @@ obj-$(CONFIG_USB_DWC3_MESON_G12A) +=
>> dwc3-meson-g12a.o
>> >>obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o
>> >>obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
>> >>obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
>> >>+obj-$(CONFIG_USB_DWC3_XILINX) += dwc3-xilinx.o
>> >>diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-
>> of-simple.c
>> >>index e62ecd22b3ed..71fd620c5161 100644
>> >>--- a/drivers/usb/dwc3/dwc3-of-simple.c
>> >>+++ b/drivers/usb/dwc3/dwc3-of-simple.c
>> >>@@ -172,7 +172,6 @@ static const struct dev_pm_ops
>> dwc3_of_simple_dev_pm_ops = {
>> >>
>> >>static const struct of_device_id of_dwc3_simple_match[] = {
>> >> { .compatible = "rockchip,rk3399-dwc3" },
>> >>- { .compatible = "xlnx,zynqmp-dwc3" },
>> >> { .compatible = "cavium,octeon-7130-usb-uctl" },
>> >> { .compatible = "sprd,sc9860-dwc3" },
>> >> { .compatible = "allwinner,sun50i-h6-dwc3" },
>> >>diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-
>> xilinx.c
>> >>new file mode 100644
>> >>index 000000000000..7e485951d2f7
>> >>--- /dev/null
>> >>+++ b/drivers/usb/dwc3/dwc3-xilinx.c
>> >>@@ -0,0 +1,334 @@
>> >>+// SPDX-License-Identifier: GPL-2.0
>> >>+/**
>> >>+ * dwc3-xilinx.c - Xilinx DWC3 controller specific glue driver
>> >>+ *
>> >>+ * Authors: Manish Narani <manish.narani@xilinx.com>
>> >>+ * Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
>> >>+ */
>> >>+
>> >>+#include <linux/module.h>
>> >>+#include <linux/kernel.h>
>> >>+#include <linux/slab.h>
>> >>+#include <linux/clk.h>
>> >>+#include <linux/of.h>
>> >>+#include <linux/platform_device.h>
>> >>+#include <linux/dma-mapping.h>
>> >>+#include <linux/of_platform.h>
>> >>+#include <linux/pm_runtime.h>
>> >>+#include <linux/reset.h>
>> >>+#include <linux/of_address.h>
>> >>+#include <linux/delay.h>
>> >>+#include <linux/firmware/xlnx-zynqmp.h>
>> >>+#include <linux/io.h>
>> >>+
>> >>+#include <linux/phy/phy.h>
>> >>+
>> >>+/* USB phy reset mask register */
>> >>+#define XLNX_USB_PHY_RST_EN 0x001C
>> >>+#define XLNX_PHY_RST_MASK 0x1
>> >>+
>> >>+/* Xilinx USB 3.0 IP Register */
>> >>+#define XLNX_USB_TRAFFIC_ROUTE_CONFIG 0x005C
>> >>+#define XLNX_USB_TRAFFIC_ROUTE_FPD 0x1
>> >>+
>> >>+/* Versal USB Reset ID */
>> >>+#define VERSAL_USB_RESET_ID 0xC104036
>> >>+
>> >>+#define XLNX_USB_FPD_PIPE_CLK 0x7c
>> >>+#define PIPE_CLK_DESELECT 1
>> >>+#define PIPE_CLK_SELECT 0
>> >>+#define XLNX_USB_FPD_POWER_PRSNT 0x80
>> >>+#define PIPE_POWER_ON 1
>> >>+#define PIPE_POWER_OFF 0
>> >>+
>> >>+struct dwc3_xlnx {
>> >>+ int num_clocks;
>> >>+ struct clk_bulk_data *clks;
>> >>+ struct device *dev;
>> >>+ void __iomem *regs;
>> >>+ int (*pltfm_init)(struct dwc3_xlnx *data);
>> >>+};
>> >>+
>> >>+static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool
>> mask)
>> >>+{
>> >>+ u32 reg;
>> >>+
>> >>+ /*
>> >>+ * Enable or disable ULPI PHY reset from USB Controller.
>> >>+ * This does not actually reset the phy, but just controls
>> >>+ * whether USB controller can or cannot reset ULPI PHY.
>> >>+ */
>> >>+ reg = readl(priv_data->regs + XLNX_USB_PHY_RST_EN);
>> >>+
>> >>+ if (mask)
>> >>+ reg &= ~XLNX_PHY_RST_MASK;
>> >>+ else
>> >>+ reg |= XLNX_PHY_RST_MASK;
>> >>+
>> >>+ writel(reg, priv_data->regs + XLNX_USB_PHY_RST_EN);
>> >>+}
>> >>+
>> >>+static int dwc3_xlnx_init_versal(struct dwc3_xlnx *priv_data)
>> >>+{
>> >>+ struct device *dev = priv_data->dev;
>> >>+ int ret;
>> >>+
>> >>+ dwc3_xlnx_mask_phy_rst(priv_data, false);
>> >>+
>> >>+ /* Assert and De-assert reset */
>> >>+ ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID,
>> >>+ PM_RESET_ACTION_ASSERT);
>> >>+ if (ret < 0) {
>> >>+ dev_err_probe(dev, ret, "failed to assert Reset\n");
>> >>+ return ret;
>> >>+ }
>> >>+
>> >>+ ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID,
>> >>+ PM_RESET_ACTION_RELEASE);
>> >>+ if (ret < 0) {
>> >>+ dev_err_probe(dev, ret, "failed to De-assert Reset\n");
>> >>+ return ret;
>> >>+ }
>> >>+
>> >>+ dwc3_xlnx_mask_phy_rst(priv_data, true);
>> >>+
>> >>+ return 0;
>> >>+}
>> >>+
>> >>+static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
>> >>+{
>> >>+ struct device *dev = priv_data->dev;
>> >>+ struct reset_control *crst, *hibrst, *apbrst;
>> >>+ struct phy *usb3_phy;
>> >>+ int ret;
>> >>+ u32 reg;
>> >>+
>> >>+ crst = devm_reset_control_get_exclusive(dev, "usb_crst");
>> >>+ if (IS_ERR(crst)) {
>> >>+ ret = PTR_ERR(crst);
>> >>+ dev_err_probe(dev, ret,
>> >>+ "failed to get core reset signal\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ hibrst = devm_reset_control_get_exclusive(dev, "usb_hibrst");
>> >>+ if (IS_ERR(hibrst)) {
>> >>+ ret = PTR_ERR(hibrst);
>> >>+ dev_err_probe(dev, ret,
>> >>+ "failed to get hibernation reset signal\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ apbrst = devm_reset_control_get_exclusive(dev, "usb_apbrst");
>> >>+ if (IS_ERR(apbrst)) {
>> >>+ ret = PTR_ERR(apbrst);
>> >>+ dev_err_probe(dev, ret,
>> >>+ "failed to get APB reset signal\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ ret = reset_control_assert(crst);
>> >>+ if (ret < 0) {
>> >>+ dev_err(dev, "Failed to assert core reset\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ ret = reset_control_assert(hibrst);
>> >>+ if (ret < 0) {
>> >>+ dev_err(dev, "Failed to assert hibernation reset\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ ret = reset_control_assert(apbrst);
>> >>+ if (ret < 0) {
>> >>+ dev_err(dev, "Failed to assert APB reset\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ usb3_phy = devm_phy_get(dev, "usb3-phy");
>> >>+
>> >>+ ret = phy_init(usb3_phy);
>> >>+ if (ret < 0) {
>> >>+ phy_exit(usb3_phy);
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ ret = reset_control_deassert(apbrst);
>> >>+ if (ret < 0) {
>> >>+ dev_err(dev, "Failed to release APB reset\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ /* Set PIPE Power Present signal in FPD Power Present Register*/
>> >>+ writel(PIPE_POWER_ON, priv_data->regs +
>> XLNX_USB_FPD_POWER_PRSNT);
>> This is somehow leading to an unstable link when using vanilla.
>>
>> >>+
>> >>+ /* Set the PIPE Clock Select bit in FPD PIPE Clock register */
>> >>+ writel(PIPE_CLK_SELECT, priv_data->regs +
>> XLNX_USB_FPD_PIPE_CLK);
>> >>+
>> >>+ ret = reset_control_deassert(crst);
>> >>+ if (ret < 0) {
>> >>+ dev_err(dev, "Failed to release core reset\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ ret = reset_control_deassert(hibrst);
>> >>+ if (ret < 0) {
>> >>+ dev_err(dev, "Failed to release hibernation reset\n");
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ ret = phy_power_on(usb3_phy);
>> >>+ if (ret < 0) {
>> >>+ phy_exit(usb3_phy);
>> >>+ goto err;
>> >>+ }
>> >>+
>> >>+ /*
>> >>+ * This routes the USB DMA traffic to go through FPD path instead
>> >>+ * of reaching DDR directly. This traffic routing is needed to
>> >>+ * make SMMU and CCI work with USB DMA.
>> >>+ */
>> >>+ if (of_dma_is_coherent(dev->of_node) ||
>> device_iommu_mapped(dev)) {
>> >>+ reg = readl(priv_data->regs +
>> XLNX_USB_TRAFFIC_ROUTE_CONFIG);
>> >>+ reg |= XLNX_USB_TRAFFIC_ROUTE_FPD;
>> >>+ writel(reg, priv_data->regs +
>> XLNX_USB_TRAFFIC_ROUTE_CONFIG);
>> >>+ }
>> >>+
>> >>+err:
>> >>+ return ret;
>> >>+}
>> >>+
>> >>+static const struct of_device_id dwc3_xlnx_of_match[] = {
>> >>+ {
>> >>+ .compatible = "xlnx,zynqmp-dwc3",
>> >>+ .data = &dwc3_xlnx_init_zynqmp,
>> >>+ },
>> >>+ {
>> >>+ .compatible = "xlnx,versal-dwc3",
>> >>+ .data = &dwc3_xlnx_init_versal,
>> >>+ },
>> >>+ { /* Sentinel */ }
>> >>+};
>> >>+MODULE_DEVICE_TABLE(of, dwc3_xlnx_of_match);
>> >>+
>> >>+static int dwc3_xlnx_probe(struct platform_device *pdev)
>> >>+{
>> >>+ struct dwc3_xlnx *priv_data;
>> >>+ struct device *dev = &pdev->dev;
>> >>+ struct device_node *np = dev->of_node;
>> >>+ const struct of_device_id *match;
>> >>+ void __iomem *regs;
>> >>+ int ret;
>> >>+
>> >>+ priv_data = devm_kzalloc(dev, sizeof(*priv_data), GFP_KERNEL);
>> >>+ if (!priv_data)
>> >>+ return -ENOMEM;
>> >>+
>> >>+ regs = devm_platform_ioremap_resource(pdev, 0);
>> >>+ if (IS_ERR(regs)) {
>> >>+ ret = PTR_ERR(regs);
>> >>+ dev_err_probe(dev, ret, "failed to map registers\n");
>> >>+ return ret;
>> >>+ }
>> >>+
>> >>+ match = of_match_node(dwc3_xlnx_of_match, pdev->dev.of_node);
>> >>+
>> >>+ priv_data->pltfm_init = match->data;
>> >>+ priv_data->regs = regs;
>> >>+ priv_data->dev = dev;
>> >>+
>> >>+ platform_set_drvdata(pdev, priv_data);
>> >>+
>> >>+ ret = devm_clk_bulk_get_all(priv_data->dev, &priv_data->clks);
>> >>+ if (ret < 0)
>> >>+ return ret;
>> >>+
>> >>+ priv_data->num_clocks = ret;
>> >>+
>> >>+ ret = clk_bulk_prepare_enable(priv_data->num_clocks, priv_data-
>> >clks);
>> >>+ if (ret)
>> >>+ return ret;
>> >>+
>> >>+ ret = priv_data->pltfm_init(priv_data);
>> >>+ if (ret)
>> >>+ goto err_clk_put;
>> >>+
>> >>+ ret = of_platform_populate(np, NULL, NULL, dev);
>> >>+ if (ret)
>> >>+ goto err_clk_put;
>> >>+
>> >>+ pm_runtime_set_active(dev);
>> >>+ pm_runtime_enable(dev);
>> >>+ pm_suspend_ignore_children(dev, false);
>> >>+ pm_runtime_get_sync(dev);
>> >>+
>> >>+ return 0;
>> >>+
>> >>+err_clk_put:
>> >>+ clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data-
>> >clks);
>> >>+ clk_bulk_put_all(priv_data->num_clocks, priv_data->clks);
>> >>+
>> >>+ return ret;
>> >>+}
>> >>+
>> >>+static int dwc3_xlnx_remove(struct platform_device *pdev)
>> >>+{
>> >>+ struct dwc3_xlnx *priv_data = platform_get_drvdata(pdev);
>> >>+ struct device *dev = &pdev->dev;
>> >>+
>> >>+ of_platform_depopulate(dev);
>> >>+
>> >>+ clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data-
>> >clks);
>> >>+ clk_bulk_put_all(priv_data->num_clocks, priv_data->clks);
>> >>+ priv_data->num_clocks = 0;
>> >>+
>> >>+ pm_runtime_disable(dev);
>> >>+ pm_runtime_put_noidle(dev);
>> >>+ pm_runtime_set_suspended(dev);
>> >>+
>> >>+ return 0;
>> >>+}
>> >>+
>> >>+static int __maybe_unused dwc3_xlnx_suspend_common(struct device
>> *dev)
>> >>+{
>> >>+ struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
>> >>+
>> >>+ clk_bulk_disable(priv_data->num_clocks, priv_data->clks);
>> >>+
>> >>+ return 0;
>> >>+}
>> >>+
>> >>+static int __maybe_unused dwc3_xlnx_resume_common(struct device
>> *dev)
>> >>+{
>> >>+ struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
>> >>+
>> >>+ return clk_bulk_enable(priv_data->num_clocks, priv_data->clks);
>> >>+}
>> >>+
>> >>+static int __maybe_unused dwc3_xlnx_runtime_idle(struct device *dev)
>> >>+{
>> >>+ pm_runtime_mark_last_busy(dev);
>> >>+ pm_runtime_autosuspend(dev);
>> >>+
>> >>+ return 0;
>> >>+}
>> >>+
>> >>+static UNIVERSAL_DEV_PM_OPS(dwc3_xlnx_dev_pm_ops,
>> dwc3_xlnx_suspend_common,
>> >>+ dwc3_xlnx_resume_common,
>> dwc3_xlnx_runtime_idle);
>> >>+
>> >>+static struct platform_driver dwc3_xlnx_driver = {
>> >>+ .probe = dwc3_xlnx_probe,
>> >>+ .remove = dwc3_xlnx_remove,
>> >>+ .driver = {
>> >>+ .name = "dwc3-xilinx",
>> >>+ .of_match_table = dwc3_xlnx_of_match,
>> >>+ .pm = &dwc3_xlnx_dev_pm_ops,
>> >>+ },
>> >>+};
>> >>+
>> >>+module_platform_driver(dwc3_xlnx_driver);
>> >>+
>> >>+MODULE_LICENSE("GPL v2");
>> >>+MODULE_DESCRIPTION("Xilinx DWC3 controller specific glue driver");
>> >>+MODULE_AUTHOR("Manish Narani <manish.narani@xilinx.com>");
>> >>+MODULE_AUTHOR("Anurag Kumar Vulisha
>> <anurag.kumar.vulisha@xilinx.com>");
>> >>--
>> >>2.17.1
>> >>
>> >>
>> >>_______________________________________________
>> >>linux-arm-kernel mailing list
>> >>linux-arm-kernel@lists.infradead.org
>> >>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>> >
>> >--
>> >Pengutronix e.K. | |
>> >Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>> >31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> >Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>>
>>
>>
>> >_______________________________________________
>> >linux-arm-kernel mailing list
>> >linux-arm-kernel@lists.infradead.org
>> >http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>>
>> --
>> Pengutronix e.K. | |
>> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel@lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-01-22 14:38    [W:0.365 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site