lkml.org 
[lkml]   [2021]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH V2 2/2] iommu: add Unisoc iommu basic driver
Hi Robin,

On Wed, 13 Jan 2021 at 03:10, Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2021-01-08 11:38, Chunyan Zhang wrote:
> > From: Chunyan Zhang <chunyan.zhang@unisoc.com>
> >
> > This patch only adds display iommu support, the driver was tested with sprd
> > dpu.
> >
> > The iommu support for others would be added once finished tests with those
> > devices, such as Image codec(jpeg) processor, a few signal processors,
> > including VSP(video), GSP(graphic), ISP(image), and camera CPP, etc.
> >
> > Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> > ---
> > drivers/iommu/Kconfig | 12 +
> > drivers/iommu/Makefile | 1 +
> > drivers/iommu/sprd-iommu.c | 546 +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 559 insertions(+)
> > create mode 100644 drivers/iommu/sprd-iommu.c
> >
> > diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> > index 192ef8f61310..3f8dcf070442 100644
> > --- a/drivers/iommu/Kconfig
> > +++ b/drivers/iommu/Kconfig
> > @@ -408,4 +408,16 @@ config VIRTIO_IOMMU
> >
> > Say Y here if you intend to run this kernel as a guest.
> >
> > +config SPRD_IOMMU
> > + tristate "Unisoc IOMMU Support"
> > + depends on ARCH_SPRD
>
> Any chance of COMPILE_TEST support too?

Yes, just forgot to add that.

>
> > + select IOMMU_API
> > + help
> > + Support for IOMMU on Unisoc's SoCs on which multi-media subsystems
> > + need IOMMU, such as DPU, Image codec(jpeg) processor, and a few
> > + signal processors, including VSP(video), GSP(graphic), ISP(image), and
> > + CPP, etc.
> > +
> > + Say Y here if you want multi-media functions.
> > +
> > endif # IOMMU_SUPPORT
> > diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
> > index 61bd30cd8369..5925b6af2123 100644
> > --- a/drivers/iommu/Makefile
> > +++ b/drivers/iommu/Makefile
> > @@ -28,3 +28,4 @@ obj-$(CONFIG_S390_IOMMU) += s390-iommu.o
> > obj-$(CONFIG_HYPERV_IOMMU) += hyperv-iommu.o
> > obj-$(CONFIG_VIRTIO_IOMMU) += virtio-iommu.o
> > obj-$(CONFIG_IOMMU_SVA_LIB) += iommu-sva-lib.o
> > +obj-$(CONFIG_SPRD_IOMMU) += sprd-iommu.o
> > diff --git a/drivers/iommu/sprd-iommu.c b/drivers/iommu/sprd-iommu.c
> > new file mode 100644
> > index 000000000000..a112b4d3cc23
> > --- /dev/null
> > +++ b/drivers/iommu/sprd-iommu.c
> > @@ -0,0 +1,546 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Unisoc IOMMU driver
> > + *
> > + * Copyright (C) 2020 Unisoc, Inc.
> > + * Author: Chunyan Zhang <chunyan.zhang@unisoc.com>
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/dma-iommu.h>
> > +#include <linux/errno.h>
> > +#include <linux/iommu.h>
> > +#include <linux/module.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/slab.h>
> > +
> > +/* SPRD IOMMU page is 4K size alignment */
> > +#define SPRD_IOMMU_PAGE_SHIFT 12
> > +#define SPRD_IOMMU_PAGE_SIZE SZ_4K
> > +
> > +#define SPRD_IOMMU_REG_OFFSET 0x800
> > +#define SPRD_EX_CFG (SPRD_IOMMU_REG_OFFSET + 0x0)
> > +#define SPRD_IOMMU_VAOR_BYPASS BIT(4)
> > +#define SPRD_IOMMU_GATE_EN BIT(1)
> > +#define SPRD_IOMMU_EN BIT(0)
> > +#define SPRD_EX_UPDATE (SPRD_IOMMU_REG_OFFSET + 0x4)
> > +#define SPRD_EX_FIRST_VPN (SPRD_IOMMU_REG_OFFSET + 0x8)
> > +#define SPRD_EX_VPN_RANGE (SPRD_IOMMU_REG_OFFSET + 0xc)
> > +#define SPRD_EX_FIRST_PPN (SPRD_IOMMU_REG_OFFSET + 0x10)
> > +#define SPRD_EX_DEFAULT_PPN (SPRD_IOMMU_REG_OFFSET + 0x14)
> > +
> > +#define SPRD_IOMMU_VERSION (SPRD_IOMMU_REG_OFFSET + 0x0)
> > +#define SPRD_VERSION_MASK GENMASK(15, 8)
> > +#define SPRD_VERSION_SHIFT 8
> > +#define SPRD_VAU_CFG (SPRD_IOMMU_REG_OFFSET + 0x4)
> > +#define SPRD_VAU_UPDATE (SPRD_IOMMU_REG_OFFSET + 0x8)
> > +#define SPRD_VAU_AUTH_CFG (SPRD_IOMMU_REG_OFFSET + 0xc)
> > +#define SPRD_VAU_FIRST_PPN (SPRD_IOMMU_REG_OFFSET + 0x10)
> > +#define SPRD_VAU_DEFAULT_PPN_RD (SPRD_IOMMU_REG_OFFSET + 0x14)
> > +#define SPRD_VAU_DEFAULT_PPN_WR (SPRD_IOMMU_REG_OFFSET + 0x18)
> > +#define SPRD_VAU_FIRST_VPN (SPRD_IOMMU_REG_OFFSET + 0x1c)
> > +#define SPRD_VAU_VPN_RANGE (SPRD_IOMMU_REG_OFFSET + 0x20)
> > +
> > +enum sprd_iommu_version {
> > + SPRD_IOMMU_EX,
> > + SPRD_IOMMU_VAU,
> > +};
> > +
> > +/*
> > + * struct sprd_iommu_match_data - sprd iommu configurations which serves
> > + * for different master devices
> > + *
> > + * @iova_start: the first address that can be mapped
> > + * @iova_size: the largest address range that can be mapped
> > + *
> > + * iova_start and iova_size are designed for debug purpose, that says different
> > + * masters use different ranges of virtual address.
> > + */
> > +struct sprd_iommu_match_data {
> > + unsigned long iova_start;
> > + unsigned long iova_size;
> > +};
> > +
> > +/*
> > + * struct sprd_iommu_device - high-level sprd iommu device representation,
> > + * including hardware information and configuration, also driver data, etc
> > + *
> > + * @mdata: hardware configuration and information
> > + * @ver: sprd iommu device version
> > + * @prot_page: protect page base address, data would be written to here
> > + * while translation fault
> > + * @base: mapped base address for accessing registers
> > + * @dev: pointer to basic device structure
> > + * @iommu: IOMMU core representation
> > + * @group: IOMMU group
> > + */
> > +struct sprd_iommu_device {
> > + const struct sprd_iommu_match_data *mdata;
> > + enum sprd_iommu_version ver;
> > + phys_addr_t prot_page;
> > + void __iomem *base;
> > + struct device *dev;
> > + struct iommu_device iommu;
> > + struct iommu_group *group;
> > +};
> > +
> > +struct sprd_iommu_domain {
> > + spinlock_t pgtlock; /* lock for page table */
> > + struct iommu_domain domain;
> > + u32 *pgt_va; /* page table virtual address base */
> > + struct sprd_iommu_device *sdev;
> > +};
> > +
> > +static const struct iommu_ops sprd_iommu_ops;
> > +
> > +static struct sprd_iommu_domain *to_sprd_domain(struct iommu_domain *dom)
> > +{
> > + return container_of(dom, struct sprd_iommu_domain, domain);
> > +}
> > +
> > +static inline void
> > +iommu_writel(struct sprd_iommu_device *sdev, unsigned int reg, u32 val)
> > +{
> > + writel_relaxed(val, sdev->base + reg);
> > +}
> > +
> > +static inline u32
> > +iommu_readl(struct sprd_iommu_device *sdev, unsigned int reg)
> > +{
> > + return readl_relaxed(sdev->base + reg);
> > +}
> > +
> > +static inline void
> > +iommu_update_bits(struct sprd_iommu_device *sdev, unsigned int reg,
> > + u32 mask, u32 shift, u32 val)
> > +{
> > + u32 t = iommu_readl(sdev, reg);
> > +
> > + t = (t & (~(mask << shift))) | ((val & mask) << shift);
> > + iommu_writel(sdev, reg, t);
> > +}
>
> This doesn't seem to be used anywhere.
>
> > +
> > +static inline int
> > +set_version(struct sprd_iommu_device *sdev)
>
> Nit: isn't this more of a "get" operation rather than a "set" one? Also
> some of these function names seem a little too vague and generic, so
> could probably do with some better namespacing.

Ok, will address in the next version.

>
> > +{
> > + sdev->ver = (iommu_readl(sdev, SPRD_IOMMU_VERSION) &
> > + SPRD_VERSION_MASK) >> SPRD_VERSION_SHIFT;
> > +
> > + if (sdev->ver != SPRD_IOMMU_EX &&
> > + sdev->ver != SPRD_IOMMU_VAU)
> > + return -EINVAL;
> > +
> > + return 0;
>
> Given what this is doing, maybe consider implementing it as a switch
> statement?

Sure.

>
> > +}
> > +
> > +static dma_addr_t sprd_iommu_dma_addr(void *va)
> > +{
> > + return (dma_addr_t)virt_to_phys(va);
> > +}
>
> Urgh, please don't copy this - I'll come back to that later...
>
> > +
> > +static unsigned long
> > +sprd_iommu_pgt_size(const struct sprd_iommu_match_data *mdata)
> > +{
> > + return (mdata->iova_size >> SPRD_IOMMU_PAGE_SHIFT) * 4;
> > +}
> > +
> > +static struct iommu_domain *sprd_iommu_domain_alloc(unsigned int domain_type)
> > +{
> > + struct sprd_iommu_domain *dom;
> > +
> > + if (domain_type != IOMMU_DOMAIN_DMA && domain_type != IOMMU_DOMAIN_UNMANAGED)
> > + return NULL;
> > +
> > + dom = kzalloc(sizeof(*dom), GFP_KERNEL);
> > + if (!dom)
> > + return NULL;
> > +
> > + if (iommu_get_dma_cookie(&dom->domain)) {
> > + kfree(dom);
> > + return NULL;
> > + }
> > +
> > + spin_lock_init(&dom->pgtlock);
> > +
> > + return &dom->domain;
> > +}
> > +
> > +static void sprd_iommu_domain_free(struct iommu_domain *domain)
> > +{
> > + struct sprd_iommu_domain *dom = to_sprd_domain(domain);
> > + struct sprd_iommu_device *sdev = dom->sdev;
> > + size_t pgt_size = (size_t)sprd_iommu_pgt_size(sdev->mdata);
>
> You cast this to size_t in both places it's used - just make the
> function return the appropriate type in the first place.
>
> > +
> > + dma_free_coherent(sdev->dev, pgt_size, dom->pgt_va,
> > + sprd_iommu_dma_addr(dom->pgt_va));
>
> In principle a domain can be freed without any device ever having been
> attached, therefore this can go badly wrong if pgt_va is invalid. But
> there's a far bigger problem lurking here anyway...
>
> > + kfree(dom);
> > +}
> > +
> > +static void sprd_iommu_first_vpn(struct sprd_iommu_device *sdev)
> > +{
> > + u32 val = (u32)sdev->mdata->iova_start;
>
> As above, if these mdata values inherently represent 32-bit values, then
> just make them u32 in the first place.
>
> > + unsigned int reg;
> > +
> > + if (sdev->ver == SPRD_IOMMU_EX)
> > + reg = SPRD_EX_FIRST_VPN;
> > + else
> > + reg = SPRD_VAU_FIRST_VPN;
> > +
> > + val = val >> SPRD_IOMMU_PAGE_SHIFT;
>
> ...however this makes me wonder whether the hardware really only works
> with 20-bit PFNs describing 32-bit addresses, or whether it's actually
> 32-bit PFNs to cope with ~40-bit addresses and you've got the truncation
> in the wrong place.

I think it is the second case, but we didn't use that many bits.

>
> > +
> > + iommu_writel(sdev, reg, val);
> > +}
> > +
> > +static void sprd_iommu_vpn_range(struct sprd_iommu_device *sdev)
> > +{
> > + u32 val = (u32)sdev->mdata->iova_size;
> > + unsigned int reg;
> > +
> > + if (sdev->ver == SPRD_IOMMU_EX)
> > + reg = SPRD_EX_VPN_RANGE;
> > + else
> > + reg = SPRD_VAU_VPN_RANGE;
> > +
> > + val = (val >> SPRD_IOMMU_PAGE_SHIFT) - 1;
> > +
> > + iommu_writel(sdev, reg, val);
> > +}
> > +
> > +static void sprd_iommu_first_ppn(struct sprd_iommu_domain *dom)
> > +{
> > + u32 val = sprd_iommu_dma_addr(dom->pgt_va) >> SPRD_IOMMU_PAGE_SHIFT;
> > + struct sprd_iommu_device *sdev = dom->sdev;
> > + unsigned int reg;
> > +
> > + if (sdev->ver == SPRD_IOMMU_EX)
> > + reg = SPRD_EX_FIRST_PPN;
> > + else
> > + reg = SPRD_VAU_FIRST_PPN;
> > +
> > + iommu_writel(sdev, reg, val);
> > +}
> > +
> > +static void sprd_iommu_default_ppn(struct sprd_iommu_device *sdev)
> > +{
> > + u32 val = (u32)sdev->prot_page >> SPRD_IOMMU_PAGE_SHIFT;
> > +
> > + if (sdev->ver == SPRD_IOMMU_EX) {
> > + iommu_writel(sdev, SPRD_EX_DEFAULT_PPN, val);
> > + } else if (sdev->ver == SPRD_IOMMU_VAU) {
> > + iommu_writel(sdev, SPRD_VAU_DEFAULT_PPN_RD, val);
> > + iommu_writel(sdev, SPRD_VAU_DEFAULT_PPN_WR, val);
> > + }
> > +}
> > +
> > +static void sprd_iommu_hw_cfg(struct sprd_iommu_device *sdev)
> > +{
> > + unsigned int reg_cfg, reg_update;
> > +
> > + if (sdev->ver == SPRD_IOMMU_EX) {
> > + reg_cfg = SPRD_EX_CFG;
> > + reg_update = SPRD_EX_UPDATE;
> > + } else {
> > + reg_cfg = SPRD_VAU_CFG;
> > + reg_update = SPRD_VAU_UPDATE;
> > + }
> > +
> > + /* enable mmu, clk gate, vaor bypass */
> > + iommu_writel(sdev, reg_cfg, SPRD_IOMMU_EN | SPRD_IOMMU_GATE_EN |
> > + SPRD_IOMMU_VAOR_BYPASS);
> > +
> > + /* clear iommu TLB buffer after page table updated */
> > + iommu_writel(sdev, reg_update, 0xffffffff);
> > +}
> > +
> > +static int sprd_iommu_attach_device(struct iommu_domain *domain,
> > + struct device *dev)
> > +{
> > + struct sprd_iommu_device *sdev = dev_iommu_priv_get(dev);
> > + struct sprd_iommu_domain *dom = to_sprd_domain(domain);
> > + size_t pgt_size = (size_t)sprd_iommu_pgt_size(sdev->mdata);
> > +
> > + dom->pgt_va = (u32 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(pgt_size));
>
> Combined with sprd_iommu_domain_free(), something is utterly broken -
> you can't allocate pgt_va from the page allocator and free it back to
> the DMA allocator later. Also as it is this has no guarantee of giving
> you something with a 32-bit physical address as assumed elsewhere (maybe
> the memory map of the relevant platforms makes that implicit, but that's
> still bad practice). Unless you have a very very good reason not to, you
> should be using the DMA allocator for this, not least so that you get a
> proper DMA address instead of abusing virt_to_phys() trickery.
>
> Either way you'll also leak this if the device is detached from a domain
> and then reattached back (or if multiple devices are attached to the
> same domain; even if you intentionally don't support that case you also
> don't prevent it either).
>
> > + if (!dom->pgt_va) {
> > + dev_err(sdev->dev, "Fail to alloc pages.\n");
> > + return -ENOMEM;
> > + }
> > +
> > + dom->domain.geometry.aperture_start = sdev->mdata->iova_start;
> > + dom->domain.geometry.aperture_end = sdev->mdata->iova_start +
> > + sdev->mdata->iova_size - 1;
> > + dom->sdev = sdev;
> > +
> > + sprd_iommu_first_ppn(dom);
> > + sprd_iommu_first_vpn(sdev);
> > + sprd_iommu_vpn_range(sdev);
> > + sprd_iommu_default_ppn(sdev);
> > + sprd_iommu_hw_cfg(sdev);
> > +
> > + return 0;
> > +}
> > +
> > +static void sprd_iommu_detach_device(struct iommu_domain *domain,
> > + struct device *dev)
> > +{
> > + struct sprd_iommu_domain *dom = to_sprd_domain(domain);
> > +
> > + dom->sdev = NULL;
> > +}
> > +
> > +static int sprd_iommu_map(struct iommu_domain *domain, unsigned long iova,
> > + phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
> > +{
> > + struct sprd_iommu_domain *dom = to_sprd_domain(domain);
> > + const struct sprd_iommu_match_data *mdata;
> > + unsigned int page_num = size >> SPRD_IOMMU_PAGE_SHIFT;
> > + unsigned long flags;
> > + unsigned int i;
> > + u32 *pgt_base_iova;
> > + u32 pabase = (u32)paddr;
>
> Calling back to earlier, can there be 64-bit (or 32-bit LPAE) systems
> with more than 32 significant PA bits?

Haven't tried this kind of case.

>
> > + int map_size = 0;
> > +
> > + if (!dom->sdev) {
> > + pr_err("No sprd_iommu_device attached to the domain\n");
> > + return -EINVAL;
> > + }
> > +
> > + mdata = dom->sdev->mdata;
>
> Arguably you could make all these checks against the geometry of the
> domain you already have, rather than dredging up the original mdata again.
>
> > + if ((iova + size) > (mdata->iova_start + mdata->iova_size) ||
> > + iova < mdata->iova_start) {
> > + dev_err(dom->sdev->dev, "(iova(0x%lx) + sixe(0x%lx)) are not in the range!\n",
> > + iova, size);
> > + return -EINVAL;
> > + }
> > +
> > + pgt_base_iova = dom->pgt_va +
> > + ((iova - mdata->iova_start) >> SPRD_IOMMU_PAGE_SHIFT);
> > +
> > + spin_lock_irqsave(&dom->pgtlock, flags);
> > + for (i = 0; i < page_num; i++) {
> > + pgt_base_iova[i] = pabase >> SPRD_IOMMU_PAGE_SHIFT;
>
> Out of curiosity, is the pagetable walker cache-coherent, or is this
> currently managing to work by pure chance and natural cache churn?

->iotlb_sync_map() was implemented in this driver, I guess that has
done what you say here?

>
> > + pabase += SPRD_IOMMU_PAGE_SIZE;
> > + map_size += SPRD_IOMMU_PAGE_SIZE;
> > + }
> > + spin_unlock_irqrestore(&dom->pgtlock, flags);
> > +
> > + return map_size == size ? 0 : -EEXIST;
> > +}
> > +
> > +static size_t sprd_iommu_unmap(struct iommu_domain *domain, unsigned long iova,
> > + size_t size, struct iommu_iotlb_gather *iotlb_gather)
> > +{
> > + struct sprd_iommu_domain *dom = to_sprd_domain(domain);
> > + const struct sprd_iommu_match_data *mdata = dom->sdev->mdata;
> > + unsigned long flags;
> > + u32 *pgt_base_iova;
> > + unsigned int page_num = size >> SPRD_IOMMU_PAGE_SHIFT;
> > +
> > + if ((iova + size) > (mdata->iova_start + mdata->iova_size) ||
> > + iova < mdata->iova_start)
> > + return -EINVAL;
> > +
> > + pgt_base_iova = dom->pgt_va +
> > + ((iova - mdata->iova_start) >> SPRD_IOMMU_PAGE_SHIFT);
> > +
> > + spin_lock_irqsave(&dom->pgtlock, flags);
> > + memset(pgt_base_iova, 0, page_num * sizeof(u32));
> > + spin_unlock_irqrestore(&dom->pgtlock, flags);
>
> Surely you need to do some TLB maintenance here, or implement
> ->iotlb_sync? I refuse to believe that you've made the world's most
> backwards TLB which *only* caches invalid translations :)

Yes, I will add ->iotlb_sync

>
> > +
> > + return 0;
> > +}
> > +
> > +static void sprd_iommu_sync_map(struct iommu_domain *domain)
> > +{
> > + struct sprd_iommu_domain *dom = to_sprd_domain(domain);
> > + unsigned int reg;
> > +
> > + if (dom->sdev->ver == SPRD_IOMMU_EX)
> > + reg = SPRD_EX_UPDATE;
> > + else
> > + reg = SPRD_VAU_UPDATE;
> > +
> > + iommu_writel(dom->sdev, reg, 0xffffffff);
> > +}
> > +
> > +static phys_addr_t sprd_iommu_iova_to_phys(struct iommu_domain *domain,
> > + dma_addr_t iova)
> > +{
> > + struct sprd_iommu_domain *dom = to_sprd_domain(domain);
> > + const struct sprd_iommu_match_data *mdata = dom->sdev->mdata;
> > + unsigned long flags;
> > + phys_addr_t pa;
> > + unsigned long start = mdata->iova_start;
> > + unsigned long end = mdata->iova_start + mdata->iova_size - 1;
> > +
> > + if (iova < start || iova > end)
> > + pr_err("iova (0x%llx) exceed the vpn range[0x%lx-0x%lx]!\n",
> > + iova, start, end);
> > +
> > + spin_lock_irqsave(&dom->pgtlock, flags);
> > + pa = *(dom->pgt_va + ((iova - mdata->iova_start) >> SPRD_IOMMU_PAGE_SHIFT));
> > + pa = pa << SPRD_IOMMU_PAGE_SHIFT;
> > + spin_unlock_irqrestore(&dom->pgtlock, flags);
> > +
> > + return pa;
> > +}
> > +
> > +static struct iommu_device *sprd_iommu_probe_device(struct device *dev)
> > +{
> > + struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > + struct sprd_iommu_device *sdev;
> > +
> > + if (!fwspec || fwspec->ops != &sprd_iommu_ops)
> > + return ERR_PTR(-ENODEV);
> > +
> > + sdev = dev_iommu_priv_get(dev);
> > +
> > + return &sdev->iommu;
> > +}
> > +
> > +static void sprd_iommu_release_device(struct device *dev)
> > +{
> > + struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > +
> > + if (!fwspec || fwspec->ops != &sprd_iommu_ops)
> > + return;
> > +
> > + iommu_fwspec_free(dev);
> > +}
> > +
> > +static struct iommu_group *sprd_iommu_device_group(struct device *dev)
> > +{
> > + struct sprd_iommu_device *sdev = dev_iommu_priv_get(dev);
> > +
> > + if (!sdev)
> > + return ERR_PTR(-ENODEV);
> > +
> > + /* All the client devices are in the same iommu-group */
> > + if (!sdev->group) {
>
> If you only have a single iommu-wide group, you may as well just
> allocate it up-front at probe time.

Sure.

>
> > + sdev->group = iommu_group_alloc();
> > + if (IS_ERR(sdev->group))
> > + dev_err(dev, "Failed to allocate IOMMU group\n");
> > + }
> > +
> > + return sdev->group;
>
> You should probably get the refcounting right either way, though.

Ok.

>
> > +}
> > +
> > +static int sprd_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
> > +{
> > + struct platform_device *pdev;
> > +
> > + if (!dev_iommu_priv_get(dev)) {
> > + pdev = of_find_device_by_node(args->np);
> > + if (WARN_ON(!pdev))
>
> It should be impossible for that to happen - the platform device has to
> exist for its driver to have bound and called iommu_register_device()
> for iommu_ops_from_fwnode() to find an of_xlate pointer to call at all.
>
> > + return -EINVAL;
> > +
> > + dev_iommu_priv_set(dev, platform_get_drvdata(pdev));
> > + }
> > +
> > + return iommu_fwspec_add_ids(dev, args->args, 1);
>
> Why? The binding says you don't ever have any arguments :/

Yes, that's not needed, will remove.

>
> > +}
> > +
> > +
> > +static const struct iommu_ops sprd_iommu_ops = {
> > + .domain_alloc = sprd_iommu_domain_alloc,
> > + .domain_free = sprd_iommu_domain_free,
> > + .attach_dev = sprd_iommu_attach_device,
> > + .detach_dev = sprd_iommu_detach_device,
> > + .map = sprd_iommu_map,
> > + .unmap = sprd_iommu_unmap,
> > + .iotlb_sync_map = sprd_iommu_sync_map,
> > + .iova_to_phys = sprd_iommu_iova_to_phys,
> > + .probe_device = sprd_iommu_probe_device,
> > + .release_device = sprd_iommu_release_device,
> > + .device_group = sprd_iommu_device_group,
> > + .of_xlate = sprd_iommu_of_xlate,
> > + .pgsize_bitmap = ~0UL << SPRD_IOMMU_PAGE_SHIFT,
> > +};
> > +
> > +static const struct sprd_iommu_match_data sprd_iommu_disp = {
> > + .iova_start = 0x30000000,
> > + .iova_size = 0x10000000,
> > +};
> > +
> > +static const struct of_device_id sprd_iommu_of_match[] = {
> > + { .compatible = "sprd,iommu-disp",
> > + .data = &sprd_iommu_disp },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, sprd_iommu_of_match);
> > +
> > +static int sprd_iommu_probe(struct platform_device *pdev)
> > +{
> > + struct sprd_iommu_device *sdev;
> > + struct device *dev = &pdev->dev;
> > + void *p;
> > + int ret;
> > +
> > + sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL);
> > + if (!sdev)
> > + return -ENOMEM;
> > +
> > + sdev->base = devm_platform_ioremap_resource(pdev, 0);
> > +
> > + sdev->mdata = device_get_match_data(dev);
> > +
> > + if (set_version(sdev)) {
> > + dev_err(dev, "iommu version(0x%x) is invalid.\n", sdev->ver);
> > + return -EINVAL;
> > + }
> > +
> > + p = (void *)get_zeroed_page(GFP_KERNEL);
> > + if (!p)
> > + return -ENOMEM;
> > + sdev->prot_page = virt_to_phys(p);
>
> No. This is a DMA buffer; use the DMA allocator and do it properly.
>
> > + sdev->dev = dev;
> > +
> > + platform_set_drvdata(pdev, sdev);
> > +
> > + ret = iommu_device_sysfs_add(&sdev->iommu, &pdev->dev, NULL,
> > + dev_name(&pdev->dev));
> > + if (ret)
> > + return ret;
> > +
> > + iommu_device_set_ops(&sdev->iommu, &sprd_iommu_ops);
> > + iommu_device_set_fwnode(&sdev->iommu, &pdev->dev.of_node->fwnode);
>
> Lots of uses of "&pdev->dev" when you already have the local "dev"
> variable :/
>
> > +
> > + ret = iommu_device_register(&sdev->iommu);
> > + if (ret)
> > + return ret;
> > +
> > + if (!iommu_present(&platform_bus_type))
> > + bus_set_iommu(&platform_bus_type, &sprd_iommu_ops);
> > +
> > + return 0;
> > +}
> > +
> > +static int sprd_iommu_remove(struct platform_device *pdev)
> > +{
> > + struct sprd_iommu_device *sdev = platform_get_drvdata(pdev);
> > +
> > + if (sdev->group)
> > + iommu_group_put(sdev->group);
> > +
> > + bus_set_iommu(&platform_bus_type, NULL);
> > +
> > + platform_set_drvdata(pdev, NULL);
> > + iommu_device_sysfs_remove(&sdev->iommu);
> > + iommu_device_unregister(&sdev->iommu);
>
> You're leaking at least prot_page and group here.

I think that group has been dealt with iommu_group_put() above.
I will add prot_page free.

Many thanks for your review, it really helps. I will address these
comments in the next version.

Chunyan

\
 
 \ /
  Last update: 2021-01-20 13:12    [W:0.803 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site