lkml.org 
[lkml]   [2021]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5] pgo: add clang's Profile Guided Optimization infrastructure
On Sun, Jan 17, 2021 at 12:58 PM Sedat Dilek <sedat.dilek@gmail.com> wrote:
>
> On Sun, Jan 17, 2021 at 12:42 PM Sedat Dilek <sedat.dilek@gmail.com> wrote:
> >
> > On Sun, Jan 17, 2021 at 12:23 PM Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > >
> > > On Sun, Jan 17, 2021 at 11:53 AM Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > > >
> > > > On Sun, Jan 17, 2021 at 11:44 AM Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > > > >
> > > > > On Sat, Jan 16, 2021 at 9:23 PM Bill Wendling <morbo@google.com> wrote:
> > > > > >
> > > > > > On Sat, Jan 16, 2021 at 9:39 AM Sedat Dilek <sedat.dilek@gmail.com> wrote:
> > > > > > > On Sat, Jan 16, 2021 at 10:44 AM 'Bill Wendling' via Clang Built Linux
> > > > > > > <clang-built-linux@googlegroups.com> wrote:
> > > > > > > >
> > > > > > > > From: Sami Tolvanen <samitolvanen@google.com>
> > > > > > > >
> > > > > > > > Enable the use of clang's Profile-Guided Optimization[1]. To generate a
> > > > > > > > profile, the kernel is instrumented with PGO counters, a representative
> > > > > > > > workload is run, and the raw profile data is collected from
> > > > > > > > /sys/kernel/debug/pgo/profraw.
> > > > > > > >
> > > > > > > > The raw profile data must be processed by clang's "llvm-profdata" tool
> > > > > > > > before it can be used during recompilation:
> > > > > > > >
> > > > > > > > $ cp /sys/kernel/debug/pgo/profraw vmlinux.profraw
> > > > > > > > $ llvm-profdata merge --output=vmlinux.profdata vmlinux.profraw
> > > > > > > >
> > > > > > > > Multiple raw profiles may be merged during this step.
> > > > > > > >
> > > > > > > > The data can now be used by the compiler:
> > > > > > > >
> > > > > > > > $ make LLVM=1 KCFLAGS=-fprofile-use=vmlinux.profdata ...
> > > > > > > >
> > > > > > > > This initial submission is restricted to x86, as that's the platform we
> > > > > > > > know works. This restriction can be lifted once other platforms have
> > > > > > > > been verified to work with PGO.
> > > > > > > >
> > > > > > > > Note that this method of profiling the kernel is clang-native, unlike
> > > > > > > > the clang support in kernel/gcov.
> > > > > > > >
> > > > > > > > [1] https://clang.llvm.org/docs/UsersManual.html#profile-guided-optimization
> > > > > > > >
> > > > > > > > Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
> > > > > > > > Co-developed-by: Bill Wendling <morbo@google.com>
> > > > > > > > Signed-off-by: Bill Wendling <morbo@google.com>
> > > > > > > > ---
> > > > > > > > v2: - Added "__llvm_profile_instrument_memop" based on Nathan Chancellor's
> > > > > > > > testing.
> > > > > > > > - Corrected documentation, re PGO flags when using LTO, based on Fangrui
> > > > > > > > Song's comments.
> > > > > > > > v3: - Added change log section based on Sedat Dilek's comments.
> > > > > > > > v4: - Remove non-x86 Makfile changes and se "hweight64" instead of using our
> > > > > > > > own popcount implementation, based on Nick Desaulniers's comment.
> > > > > > > > v5: - Correct padding calculation, discovered by Nathan Chancellor.
> > > > > > > > ---
> > > > > > > > Documentation/dev-tools/index.rst | 1 +
> > > > > > > > Documentation/dev-tools/pgo.rst | 127 +++++++++
> > > > > > > > MAINTAINERS | 9 +
> > > > > > > > Makefile | 3 +
> > > > > > > > arch/Kconfig | 1 +
> > > > > > > > arch/x86/Kconfig | 1 +
> > > > > > > > arch/x86/boot/Makefile | 1 +
> > > > > > > > arch/x86/boot/compressed/Makefile | 1 +
> > > > > > > > arch/x86/crypto/Makefile | 2 +
> > > > > > > > arch/x86/entry/vdso/Makefile | 1 +
> > > > > > > > arch/x86/kernel/vmlinux.lds.S | 2 +
> > > > > > > > arch/x86/platform/efi/Makefile | 1 +
> > > > > > > > arch/x86/purgatory/Makefile | 1 +
> > > > > > > > arch/x86/realmode/rm/Makefile | 1 +
> > > > > > > > arch/x86/um/vdso/Makefile | 1 +
> > > > > > > > drivers/firmware/efi/libstub/Makefile | 1 +
> > > > > > > > include/asm-generic/vmlinux.lds.h | 44 +++
> > > > > > > > kernel/Makefile | 1 +
> > > > > > > > kernel/pgo/Kconfig | 35 +++
> > > > > > > > kernel/pgo/Makefile | 5 +
> > > > > > > > kernel/pgo/fs.c | 382 ++++++++++++++++++++++++++
> > > > > > > > kernel/pgo/instrument.c | 185 +++++++++++++
> > > > > > > > kernel/pgo/pgo.h | 206 ++++++++++++++
> > > > > > > > scripts/Makefile.lib | 10 +
> > > > > > > > 24 files changed, 1022 insertions(+)
> > > > > > > > create mode 100644 Documentation/dev-tools/pgo.rst
> > > > > > > > create mode 100644 kernel/pgo/Kconfig
> > > > > > > > create mode 100644 kernel/pgo/Makefile
> > > > > > > > create mode 100644 kernel/pgo/fs.c
> > > > > > > > create mode 100644 kernel/pgo/instrument.c
> > > > > > > > create mode 100644 kernel/pgo/pgo.h
> > > > > > > >
> > > > > > > > diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst
> > > > > > > > index f7809c7b1ba9e..8d6418e858062 100644
> > > > > > > > --- a/Documentation/dev-tools/index.rst
> > > > > > > > +++ b/Documentation/dev-tools/index.rst
> > > > > > > > @@ -26,6 +26,7 @@ whole; patches welcome!
> > > > > > > > kgdb
> > > > > > > > kselftest
> > > > > > > > kunit/index
> > > > > > > > + pgo
> > > > > > > >
> > > > > > > >
> > > > > > > > .. only:: subproject and html
> > > > > > > > diff --git a/Documentation/dev-tools/pgo.rst b/Documentation/dev-tools/pgo.rst
> > > > > > > > new file mode 100644
> > > > > > > > index 0000000000000..b7f11d8405b73
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/Documentation/dev-tools/pgo.rst
> > > > > > > > @@ -0,0 +1,127 @@
> > > > > > > > +.. SPDX-License-Identifier: GPL-2.0
> > > > > > > > +
> > > > > > > > +===============================
> > > > > > > > +Using PGO with the Linux kernel
> > > > > > > > +===============================
> > > > > > > > +
> > > > > > > > +Clang's profiling kernel support (PGO_) enables profiling of the Linux kernel
> > > > > > > > +when building with Clang. The profiling data is exported via the ``pgo``
> > > > > > > > +debugfs directory.
> > > > > > > > +
> > > > > > > > +.. _PGO: https://clang.llvm.org/docs/UsersManual.html#profile-guided-optimization
> > > > > > > > +
> > > > > > > > +
> > > > > > > > +Preparation
> > > > > > > > +===========
> > > > > > > > +
> > > > > > > > +Configure the kernel with:
> > > > > > > > +
> > > > > > > > +.. code-block:: make
> > > > > > > > +
> > > > > > > > + CONFIG_DEBUG_FS=y
> > > > > > > > + CONFIG_PGO_CLANG=y
> > > > > > > > +
> > > > > > > > +Note that kernels compiled with profiling flags will be significantly larger
> > > > > > > > +and run slower.
> > > > > > > > +
> > > > > > > > +Profiling data will only become accessible once debugfs has been mounted:
> > > > > > > > +
> > > > > > > > +.. code-block:: sh
> > > > > > > > +
> > > > > > > > + mount -t debugfs none /sys/kernel/debug
> > > > > > > > +
> > > > > > > > +
> > > > > > > > +Customization
> > > > > > > > +=============
> > > > > > > > +
> > > > > > > > +You can enable or disable profiling for individual file and directories by
> > > > > > > > +adding a line similar to the following to the respective kernel Makefile:
> > > > > > > > +
> > > > > > > > +- For a single file (e.g. main.o)
> > > > > > > > +
> > > > > > > > + .. code-block:: make
> > > > > > > > +
> > > > > > > > + PGO_PROFILE_main.o := y
> > > > > > > > +
> > > > > > > > +- For all files in one directory
> > > > > > > > +
> > > > > > > > + .. code-block:: make
> > > > > > > > +
> > > > > > > > + PGO_PROFILE := y
> > > > > > > > +
> > > > > > > > +To exclude files from being profiled use
> > > > > > > > +
> > > > > > > > + .. code-block:: make
> > > > > > > > +
> > > > > > > > + PGO_PROFILE_main.o := n
> > > > > > > > +
> > > > > > > > +and
> > > > > > > > +
> > > > > > > > + .. code-block:: make
> > > > > > > > +
> > > > > > > > + PGO_PROFILE := n
> > > > > > > > +
> > > > > > > > +Only files which are linked to the main kernel image or are compiled as kernel
> > > > > > > > +modules are supported by this mechanism.
> > > > > > > > +
> > > > > > > > +
> > > > > > > > +Files
> > > > > > > > +=====
> > > > > > > > +
> > > > > > > > +The PGO kernel support creates the following files in debugfs:
> > > > > > > > +
> > > > > > > > +``/sys/kernel/debug/pgo``
> > > > > > > > + Parent directory for all PGO-related files.
> > > > > > > > +
> > > > > > > > +``/sys/kernel/debug/pgo/reset``
> > > > > > > > + Global reset file: resets all coverage data to zero when written to.
> > > > > > > > +
> > > > > > > > +``/sys/kernel/debug/profraw``
> > > > > > > > + The raw PGO data that must be processed with ``llvm_profdata``.
> > > > > > > > +
> > > > > > > > +
> > > > > > > > +Workflow
> > > > > > > > +========
> > > > > > > > +
> > > > > > > > +The PGO kernel can be run on the host or test machines. The data though should
> > > > > > > > +be analyzed with Clang's tools from the same Clang version as the kernel was
> > > > > > > > +compiled. Clang's tolerant of version skew, but it's easier to use the same
> > > > > > > > +Clang version.
> > > > > > > > +
> > > > > > > > +The profiling data is useful for optimizing the kernel, analyzing coverage,
> > > > > > > > +etc. Clang offers tools to perform these tasks.
> > > > > > > > +
> > > > > > > > +Here is an example workflow for profiling an instrumented kernel with PGO and
> > > > > > > > +using the result to optimize the kernel:
> > > > > > > > +
> > > > > > > > +1) Install the kernel on the TEST machine.
> > > > > > > > +
> > > > > > > > +2) Reset the data counters right before running the load tests
> > > > > > > > +
> > > > > > > > + .. code-block:: sh
> > > > > > > > +
> > > > > > > > + $ echo 1 > /sys/kernel/debug/pgo/reset
> > > > > > > > +
> > > > > > >
> > > > > > > I do not get this...
> > > > > > >
> > > > > > > # mount | grep debugfs
> > > > > > > debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
> > > > > > >
> > > > > > > After the load-test...?
> > > > > > >
> > > > > > > echo 0 > /sys/kernel/debug/pgo/reset
> > > > > > >
> > > > > > Writing anything to /sys/kernel/debug/pgo/reset will cause it to reset
> > > > > > the profiling counters. I picked 1 (one) semi-randomly, but it could
> > > > > > be any number, letter, your favorite short story, etc. You don't want
> > > > > > to reset it before collecting the profiling data from your load tests
> > > > > > though.
> > > > > >
> > > > > > > > +3) Run the load tests.
> > > > > > > > +
> > > > > > > > +4) Collect the raw profile data
> > > > > > > > +
> > > > > > > > + .. code-block:: sh
> > > > > > > > +
> > > > > > > > + $ cp -a /sys/kernel/debug/pgo/profraw /tmp/vmlinux.profraw
> > > > > > > > +
> > > > > > >
> > > > > > > This is only 4,9M small and seen from the date 5mins before I run the
> > > > > > > echo-1 line.
> > > > > > >
> > > > > > > # ll /sys/kernel/debug/pgo
> > > > > > > insgesamt 0
> > > > > > > drwxr-xr-x 2 root root 0 16. Jan 17:29 .
> > > > > > > drwx------ 41 root root 0 16. Jan 17:29 ..
> > > > > > > -rw------- 1 root root 0 16. Jan 17:29 profraw
> > > > > > > --w------- 1 root root 0 16. Jan 18:19 reset
> > > > > > >
> > > > > > > # cp -a /sys/kernel/debug/pgo/profraw /tmp/vmlinux.profraw
> > > > > > >
> > > > > > > # ll /tmp/vmlinux.profraw
> > > > > > > -rw------- 1 root root 4,9M 16. Jan 17:29 /tmp/vmlinux.profraw
> > > > > > >
> > > > > > > For me there was no prof-data collected from my defconfig kernel-build.
> > > > > > >
> > > > > > The /sys/kernel/debug/pgo/profraw file is read-only. Nothing writes to
> > > > > > it, not even the kernel. All it does is serialize the profiling
> > > > > > counters from a memory location in the kernel into a format that
> > > > > > LLVM's tools can understand.
> > > > > >
> > > > > > > > +5) (Optional) Download the raw profile data to the HOST machine.
> > > > > > > > +
> > > > > > > > +6) Process the raw profile data
> > > > > > > > +
> > > > > > > > + .. code-block:: sh
> > > > > > > > +
> > > > > > > > + $ llvm-profdata merge --output=vmlinux.profdata vmlinux.profraw
> > > > > > > > +
> > > > > > >
> > > > > > > Is that executed in /path/to/linux/git?
> > > > > > >
> > > > > > The llvm-profdata tool is not in the linux source tree. You need to
> > > > > > grab it from a clang distribution (or built from clang's git repo).
> > > > > >
> > > > > > > > + Note that multiple raw profile data files can be merged during this step.
> > > > > > > > +
> > > > > > > > +7) Rebuild the kernel using the profile data (PGO disabled)
> > > > > > > > +
> > > > > > > > + .. code-block:: sh
> > > > > > > > +
> > > > > > > > + $ make LLVM=1 KCFLAGS=-fprofile-use=vmlinux.profdata ...
> > > > > > >
> > > > > > > How big is vmlinux.profdata (make defconfig)?
> > > > > > >
> > > > > > I don't have numbers for this, but from what you listed here, it's ~5M
> > > > > > in size. The size is proportional to the number of counters
> > > > > > instrumented in the kernel.
> > > > > >
> > > > > > > Do I need to do a full defconfig build or can I stop the build after
> > > > > > > let me say 10mins?
> > > > > > >
> > > > > > You should do a full rebuild. Make sure that PGO is disabled during the rebuild.
> > > > > >
> > > > >
> > > > > Thanks Bill for all the information.
> > > > >
> > > > > And sorry if I am so pedantic.
> > > > >
> > > > > I have installed my Debian system with Legacy-BIOS enabled.
> > > > >
> > > > > When I rebuild with KCFLAGS=-fprofile-use=vmlinux.profdata (LLVM=1 I
> > > > > have as a default) my system hangs on reboot.
> > > > >
> > > > > [ diffconfig ]
> > > > > $ scripts/diffconfig /boot/config-5.11.0-rc3-8-amd64-clang12-pgo
> > > > > /boot/config-5.11.0-rc3-9-amd64-clang12-pgo
> > > > > BUILD_SALT "5.11.0-rc3-8-amd64-clang12-pgo" -> "5.11.0-rc3-9-amd64-clang12-pgo"
> > > > > PGO_CLANG y -> n
> > > > >
> > > > > [ my make line ]
> > > > > $ cat ../start-build_5.11.0-rc3-9-amd64-clang12-pgo.txt
> > > > > dileks 63120 63095 0 06:47 pts/2 00:00:00 /usr/bin/perf_5.10
> > > > > stat make V=1 -j4 HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang
> > > > > LD=ld.lld LLVM=1 LLVM_IAS=1 PAHOLE=/opt/pahole/bin/pahole
> > > > > LOCALVERSION=-9-amd64-clang12-pgo KBUILD_VERBOSE=1
> > > > > KBUILD_BUILD_HOST=iniza KBUILD_BUILD_USER=sedat.dilek@gmail.com
> > > > > KBUILD_BUILD_TIMESTAMP=2021-01-17 bindeb-pkg
> > > > > KDEB_PKGVERSION=5.11.0~rc3-9~bullseye+dileks1
> > > > > KCFLAGS=-fprofile-use=vmlinux.profdata
> > > > >
> > > > > ( Yes, 06:47 a.m. in the morning :-). )
> > > > >
> > > > > When I boot with the rebuild Linux-kernel I see:
> > > > >
> > > > > Wrong EFI loader signature
> > > > > ...
> > > > > Decompressing
> > > > > Parsing EFI
> > > > > Performing Relocations done.
> > > > > Booting the Kernel.
> > > > >
> > > > > *** SYSTEM HANGS ***
> > > > > ( I waited for approx 1 min )
> > > > >
> > > > > I tried to turn UEFI support ON and OFF.
> > > > > No success.
> > > > >
> > > > > Does Clang-PGO support Legacy-BIOS or is something different wrong?
> > > > >
> > > > > Thanks.
> > > > >
> > > >
> > > > My bootloader is GRUB.
> > > >
> > > > In UEFI-BIOS settings there is no secure-boot disable option.
> > > > Just simple "Use UEFI BIOS" enabled|disabled.
> > > >
> > > > Installed Debian packages:
> > > >
> > > > ii grub-common 2.04-12
> > > > ii grub-pc 2.04-12
> > > > ii grub-pc-bin 2.04-12
> > > > ii grub2-common 2.04-12
> > > >
> > > > I found in the below link to do in grub-shell:
> > > >
> > > > set check_signatures=no
> > > >
> > > > But this is when grub-efi is installed.
> > > >
> > > > - Sedat -
> > > >
> > > > Link: https://unix.stackexchange.com/questions/126286/grub-efi-disable-signature-check
> > >
> > > Forget about that "Wrong EFI bootloader" - I see this with all other
> > > kernels (all boot fine).
> > >
> > > I tried in QEMU with and without KASLR:
> > >
> > > [ run_qemu.sh ]
> > > KPATH=$(pwd)
> > >
> > > APPEND="root=/dev/ram0 console=ttyS0 hung_task_panic=1 earlyprintk=ttyS0,115200"
> > > APPEND="$APPEND nokaslr"
> > >
> > > qemu-system-x86_64 -enable-kvm -M pc -kernel $KPATH/bzImage -initrd
> > > $KPATH/initrd.img -m 512 -net none -serial stdio -append "${APPEND}"
> > > [ /run_qemu.sh ]
> > >
> > > $ ./run_qemu.sh
> > > Probing EDD (edd=off to disable)... ok
> > > Wrong EFI loader signature.
> > > early console in extract_kernel
> > > input_data: 0x000000000289940d
> > > input_len: 0x000000000069804a
> > > output: 0x0000000001000000
> > > output_len: 0x0000000001ef2010
> > > kernel_total_size: 0x0000000001c2c000
> > > needed_size: 0x0000000002000000
> > > trampoline_32bit: 0x000000000009d000
> > >
> > >
> > > KASLR disabled: 'nokaslr' on cmdline.
> > >
> > >
> > > Decompressing Linux... Parsing ELF... No relocation needed... done.
> > > Booting the kernel.
> > >
> > > QEMU run stops, too.
> > >
> >
> > I re-generated my initrd.img with GZIP as compressor (my default is ZSTD).
> >
> > --- /etc/initramfs-tools/initramfs.conf 2021-01-17 12:35:30.823818501 +0100
> > +++ /etc/initramfs-tools/initramfs.conf.zstd 2020-09-21
> > 23:55:43.121735427 +0200
> > @@ -41,7 +41,7 @@ KEYMAP=n
> > # COMPRESS: [ gzip | bzip2 | lz4 | lzma | lzop | xz | zstd ]
> > #
> >
> > -COMPRESS=gzip
> > +COMPRESS=zstd
> >
> > #
> > # DEVICE: ...
> >
> > root# KVER="5.11.0-rc3-9-amd64-clang12-pgo" ; update-initramfs -c -k $KVER
> >
> > QEMU boot stops at the same stage.
> >
> > Now, my head is empty...
> >
> > Any comments?
> >
>
> ( Just as a side note I have Nick's DWARF-v5 support enabled. )
>
> There is one EFI related warning in my build-log:
>
> $ grep warning: build-log_5.11.0-rc3-9-amd64-clang12-pgo.txt
> dpkg-architecture: warning: specified GNU system type x86_64-linux-gnu
> does not match CC system type x86_64-pc-linux-gnu, try setting a
> correct CC environment variable
> warning: arch/x86/platform/efi/quirks.c: Function control flow change
> detected (hash mismatch) efi_arch_mem_reserve Hash =
> 391331300655996873 [-Wbackend-plugin]
> warning: arch/x86/platform/efi/efi.c: Function control flow change
> detected (hash mismatch) efi_attr_is_visible Hash = 567185240781730690
> [-Wbackend-plugin]
> arch/x86/crypto/aegis128-aesni-glue.c:265:30: warning: unused variable
> 'simd_alg' [-Wunused-variable]
> warning: lib/crypto/sha256.c: Function control flow change detected
> (hash mismatch) sha256_update Hash = 744640996947387358
> [-Wbackend-plugin]
> warning: arch/x86/boot/compressed/string.c: Function control flow
> change detected (hash mismatch) memcmp Hash = 742261418966908927
> [-Wbackend-plugin]
> warning: arch/x86/boot/compressed/string.c: Function control flow
> change detected (hash mismatch) bcmp Hash = 742261418966908927
> [-Wbackend-plugin]
> warning: arch/x86/boot/compressed/string.c: Function control flow
> change detected (hash mismatch) strcmp Hash = 536873291001348520
> [-Wbackend-plugin]
> warning: arch/x86/boot/compressed/string.c: Function control flow
> change detected (hash mismatch) strnlen Hash = 146835646621254984
> [-Wbackend-plugin]
> warning: arch/x86/boot/compressed/string.c: Function control flow
> change detected (hash mismatch) simple_strtoull Hash =
> 252792765950587360 [-Wbackend-plugin]
> warning: arch/x86/boot/compressed/string.c: Function control flow
> change detected (hash mismatch) strstr Hash = 391331303349076211
> [-Wbackend-plugin]
> warning: arch/x86/boot/compressed/string.c: Function control flow
> change detected (hash mismatch) strchr Hash = 1063705159280644635
> [-Wbackend-plugin]
> warning: arch/x86/boot/compressed/string.c: Function control flow
> change detected (hash mismatch) kstrtoull Hash = 758414239132790022
> [-Wbackend-plugin]
> drivers/infiniband/hw/hfi1/platform.o: warning: objtool: tune_serdes()
> falls through to next function apply_tx_lanes()
>
> Cannot say if this information is helpful.
>

My LLVM/Clang v12 is from <apt.llvm.org>:

clang-12 version 1:12~++20210115111113+45ef053bd709-1~exp1~20210115101809.3724

My kernel-config is attached.

- Sedat -
[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2021-01-17 13:06    [W:0.195 / U:1.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site