lkml.org 
[lkml]   [2021]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 5/6] regulator: pf8x00: use linear range for buck 1-6
Date
Use a linear range to describe the voltages of the
bucks 1-6 instead of listing it one by one (via a macro)

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
---
drivers/regulator/pf8x00-regulator.c | 83 +++++++++++++++++-----------
1 file changed, 51 insertions(+), 32 deletions(-)

diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index 0c0f643b9c60..866162fddd07 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -154,35 +154,11 @@ static const unsigned int pf8x00_sw_current_table[] = {
2100000, 2600000, 3000000, 4500000,
};

-#define SWV(i) (6250 * i + 400000)
-#define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \
- SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7)
-
/* Output: 0.4V to 1.8V */
-static const int pf8x00_sw1_to_6_voltages[] = {
- SWV_LINE(0),
- SWV_LINE(1),
- SWV_LINE(2),
- SWV_LINE(3),
- SWV_LINE(4),
- SWV_LINE(5),
- SWV_LINE(6),
- SWV_LINE(7),
- SWV_LINE(8),
- SWV_LINE(9),
- SWV_LINE(10),
- SWV_LINE(11),
- SWV_LINE(12),
- SWV_LINE(13),
- SWV_LINE(14),
- SWV_LINE(15),
- SWV_LINE(16),
- SWV_LINE(17),
- SWV_LINE(18),
- SWV_LINE(19),
- SWV_LINE(20),
- SWV_LINE(21),
- 1500000, 1800000,
+#define PF8XOO_SW1_6_VOLTAGE_NUM 0xB2
+static const struct linear_range pf8x00_sw1_to_6_voltages[] = {
+ REGULATOR_LINEAR_RANGE(400000, 0x00, 0xB0, 6250),
+ REGULATOR_LINEAR_RANGE(1800000, 0xB1, 0xB1, 0),
};

/* Output: 1.0V to 4.1V */
@@ -296,7 +272,19 @@ static const struct regulator_ops pf8x00_ldo_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};

-static const struct regulator_ops pf8x00_buck_ops = {
+
+static const struct regulator_ops pf8x00_buck1_6_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+};
+
+static const struct regulator_ops pf8x00_buck7_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -345,11 +333,41 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.of_match = _name, \
.regulators_node = "regulators", \
.of_parse_cb = pf8x00_of_parse_cb, \
- .n_voltages = ARRAY_SIZE(voltages), \
- .ops = &pf8x00_buck_ops, \
+ .n_voltages = PF8XOO_SW1_6_VOLTAGE_NUM, \
+ .ops = &pf8x00_buck1_6_ops, \
.type = REGULATOR_VOLTAGE, \
.id = PF8X00_BUCK ## _id, \
.owner = THIS_MODULE, \
+ .linear_ranges = pf8x00_sw1_to_6_voltages, \
+ .n_linear_ranges = \
+ ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \
+ .vsel_reg = (base) + SW_RUN_VOLT, \
+ .vsel_mask = 0xff, \
+ .curr_table = pf8x00_sw_current_table, \
+ .n_current_limits = \
+ ARRAY_SIZE(pf8x00_sw_current_table), \
+ .csel_reg = (base) + SW_CONFIG2, \
+ .csel_mask = PF8X00_SWXILIM_MASK, \
+ .enable_reg = (base) + SW_MODE1, \
+ .enable_val = 0x3, \
+ .disable_val = 0x0, \
+ .enable_mask = 0x3, \
+ .enable_time = 500, \
+ }, \
+ }
+
+#define PF8X00BUCK7(_name, base, voltages) \
+ [PF8X00_BUCK7] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .of_parse_cb = pf8x00_of_parse_cb, \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pf8x00_buck7_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PF8X00_BUCK7, \
+ .owner = THIS_MODULE, \
.volt_table = voltages, \
.vsel_reg = (base) + SW_RUN_VOLT, \
.vsel_mask = 0xff, \
@@ -366,6 +384,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
}, \
}

+
#define PF8X00VSNVS(_name, base, voltages) \
[PF8X00_VSNVS] = { \
.desc = { \
@@ -394,7 +413,7 @@ static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages),
PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages),
PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages),
- PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
+ PF8X00BUCK7("buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages),
};

--
2.25.1
\
 
 \ /
  Last update: 2021-01-14 18:50    [W:1.711 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site