lkml.org 
[lkml]   [2021]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: phy: phy-stm32-usbphyc: add #clock-cells required property
Date
usbphyc provides a unique clock called ck_usbo_48m.
STM32 USB OTG needs a 48Mhz clock (utmifs_clk48) for Full-Speed operation.
ck_usbo_48m is a possible parent clock for USB OTG 48Mhz clock.

ck_usbo_48m is available as soon as the PLL is enabled.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
No change in v2.
---
.../devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 46df6786727a..4e4da64b8e01 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -51,6 +51,10 @@ properties:
vdda1v8-supply:
description: regulator providing 1V8 power supply to the PLL block

+ '#clock-cells':
+ description: number of clock cells for ck_usbo_48m consumer
+ const: 0
+
#Required child nodes:

patternProperties:
@@ -102,6 +106,7 @@ required:
- "#size-cells"
- vdda1v1-supply
- vdda1v8-supply
+ - '#clock-cells'
- usb-phy@0
- usb-phy@1

@@ -120,6 +125,7 @@ examples:
vdda1v8-supply = <&reg18>;
#address-cells = <1>;
#size-cells = <0>;
+ #clock-cells = <0>;

usbphyc_port0: usb-phy@0 {
reg = <0>;
--
2.17.1
\
 
 \ /
  Last update: 2021-01-14 18:16    [W:0.233 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site