lkml.org 
[lkml]   [2021]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 3/4] ARM: dts: stm32: Fix schema warnings for pwm-leds
From
Date
Hi Alexander

On 12/28/20 5:32 PM, Alexander Dahl wrote:
> The node names for devices using the pwm-leds driver follow a certain
> naming scheme (now). Parent node name is not enforced, but recommended
> by DT project.
>
> DTC arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
> CHECK arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml
> /home/alex/build/linux/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dt.yaml: led-rgb: 'led-blue', 'led-green', 'led-red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
> From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml
>
> Signed-off-by: Alexander Dahl <post@lespocky.de>
> Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

Applied on stm32-next.

Thanks.
Alex

> ---
>
> Notes:
> v8 -> v9:
> * added Acked-by (Ahmad Fatoum)
> * rebased on v5.11-rc1
>
> v7 -> v8:
> * rebased on recent pavel/for-next (post v5.10-rc1)
> * updated indexes and added comment (Ahmad Fatoum)
>
> v6 -> v7:
> * split up patch (one per sub arch)
> * added actual warnings to commit message
>
> arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> index cda8e871f999..1e9bf7eea0f1 100644
> --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
> @@ -36,34 +36,35 @@
> stdout-path = &uart4;
> };
>
> - led-act {
> + led-controller-0 {
> compatible = "gpio-leds";
>
> - led-green {
> + led-0 {
> label = "mc1:green:act";
> gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "heartbeat";
> };
> };
>
> - led-rgb {
> + led-controller-1 {
> compatible = "pwm-leds";
>
> - led-red {
> + /* led-1 to led-3 are part of a single RGB led */
> + led-1 {
> label = "mc1:red:rgb";
> pwms = <&leds_pwm 1 1000000 0>;
> max-brightness = <255>;
> active-low;
> };
>
> - led-green {
> + led-2 {
> label = "mc1:green:rgb";
> pwms = <&leds_pwm 2 1000000 0>;
> max-brightness = <255>;
> active-low;
> };
>
> - led-blue {
> + led-3 {
> label = "mc1:blue:rgb";
> pwms = <&leds_pwm 3 1000000 0>;
> max-brightness = <255>;
>

\
 
 \ /
  Last update: 2021-01-14 17:09    [W:0.192 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site