lkml.org 
[lkml]   [2021]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 1/6] net: ipa: a few simple renames
Date
The return value of gsi_command() is true if successful or false if
we time out waiting for a completion interrupt.

Rename the variables in the three callers of gsi_command() to be
"timeout", to make it more obvious that's the only reason for
failure.

In addition, add a "gsi_" prefix to evt_ring_command() so its name
is consistent with the convention used for GSI channel and generic
commands.

Signed-off-by: Alex Elder <elder@linaro.org>
---
drivers/net/ipa/gsi.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index 14d9a791924bf..b5913ce0bc943 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -326,13 +326,13 @@ gsi_evt_ring_state(struct gsi *gsi, u32 evt_ring_id)
}

/* Issue an event ring command and wait for it to complete */
-static void evt_ring_command(struct gsi *gsi, u32 evt_ring_id,
- enum gsi_evt_cmd_opcode opcode)
+static void gsi_evt_ring_command(struct gsi *gsi, u32 evt_ring_id,
+ enum gsi_evt_cmd_opcode opcode)
{
struct gsi_evt_ring *evt_ring = &gsi->evt_ring[evt_ring_id];
struct completion *completion = &evt_ring->completion;
struct device *dev = gsi->dev;
- bool success;
+ bool timeout;
u32 val;

/* We only perform one event ring command at a time, and event
@@ -354,13 +354,13 @@ static void evt_ring_command(struct gsi *gsi, u32 evt_ring_id,
val = u32_encode_bits(evt_ring_id, EV_CHID_FMASK);
val |= u32_encode_bits(opcode, EV_OPCODE_FMASK);

- success = gsi_command(gsi, GSI_EV_CH_CMD_OFFSET, val, completion);
+ timeout = !gsi_command(gsi, GSI_EV_CH_CMD_OFFSET, val, completion);

/* Disable the interrupt again */
gsi_irq_type_disable(gsi, GSI_EV_CTRL);
iowrite32(0, gsi->virt + GSI_CNTXT_SRC_EV_CH_IRQ_MSK_OFFSET);

- if (success)
+ if (!timeout)
return;

dev_err(dev, "GSI command %u for event ring %u timed out, state %u\n",
@@ -380,7 +380,7 @@ static int gsi_evt_ring_alloc_command(struct gsi *gsi, u32 evt_ring_id)
return -EINVAL;
}

- evt_ring_command(gsi, evt_ring_id, GSI_EVT_ALLOCATE);
+ gsi_evt_ring_command(gsi, evt_ring_id, GSI_EVT_ALLOCATE);

/* If successful the event ring state will have changed */
if (evt_ring->state == GSI_EVT_RING_STATE_ALLOCATED)
@@ -405,7 +405,7 @@ static void gsi_evt_ring_reset_command(struct gsi *gsi, u32 evt_ring_id)
return;
}

- evt_ring_command(gsi, evt_ring_id, GSI_EVT_RESET);
+ gsi_evt_ring_command(gsi, evt_ring_id, GSI_EVT_RESET);

/* If successful the event ring state will have changed */
if (evt_ring->state == GSI_EVT_RING_STATE_ALLOCATED)
@@ -426,7 +426,7 @@ static void gsi_evt_ring_de_alloc_command(struct gsi *gsi, u32 evt_ring_id)
return;
}

- evt_ring_command(gsi, evt_ring_id, GSI_EVT_DE_ALLOC);
+ gsi_evt_ring_command(gsi, evt_ring_id, GSI_EVT_DE_ALLOC);

/* If successful the event ring state will have changed */
if (evt_ring->state == GSI_EVT_RING_STATE_NOT_ALLOCATED)
@@ -456,7 +456,7 @@ gsi_channel_command(struct gsi_channel *channel, enum gsi_ch_cmd_opcode opcode)
u32 channel_id = gsi_channel_id(channel);
struct gsi *gsi = channel->gsi;
struct device *dev = gsi->dev;
- bool success;
+ bool timeout;
u32 val;

/* We only perform one channel command at a time, and channel
@@ -477,13 +477,13 @@ gsi_channel_command(struct gsi_channel *channel, enum gsi_ch_cmd_opcode opcode)

val = u32_encode_bits(channel_id, CH_CHID_FMASK);
val |= u32_encode_bits(opcode, CH_OPCODE_FMASK);
- success = gsi_command(gsi, GSI_CH_CMD_OFFSET, val, completion);
+ timeout = !gsi_command(gsi, GSI_CH_CMD_OFFSET, val, completion);

/* Disable the interrupt again */
gsi_irq_type_disable(gsi, GSI_CH_CTRL);
iowrite32(0, gsi->virt + GSI_CNTXT_SRC_CH_IRQ_MSK_OFFSET);

- if (success)
+ if (!timeout)
return;

dev_err(dev, "GSI command %u for channel %u timed out, state %u\n",
@@ -1627,7 +1627,7 @@ static int gsi_generic_command(struct gsi *gsi, u32 channel_id,
enum gsi_generic_cmd_opcode opcode)
{
struct completion *completion = &gsi->completion;
- bool success;
+ bool timeout;
u32 val;

/* The error global interrupt type is always enabled (until we
@@ -1650,12 +1650,12 @@ static int gsi_generic_command(struct gsi *gsi, u32 channel_id,
val |= u32_encode_bits(channel_id, GENERIC_CHID_FMASK);
val |= u32_encode_bits(GSI_EE_MODEM, GENERIC_EE_FMASK);

- success = gsi_command(gsi, GSI_GENERIC_CMD_OFFSET, val, completion);
+ timeout = !gsi_command(gsi, GSI_GENERIC_CMD_OFFSET, val, completion);

/* Disable the GP_INT1 IRQ type again */
iowrite32(BIT(ERROR_INT), gsi->virt + GSI_CNTXT_GLOB_IRQ_EN_OFFSET);

- if (success)
+ if (!timeout)
return gsi->result;

dev_err(gsi->dev, "GSI generic command %u to channel %u timed out\n",
--
2.20.1
\
 
 \ /
  Last update: 2021-01-13 18:16    [W:0.964 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site