lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 2/2] ASoC: rt715:add Mic Mute LED control support
Date
> > -----Original Message-----
> > From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> > Sent: 2021年1月12日 2:07
> > To: Yuan, Perry; oder_chiou@realtek.com; perex@perex.cz; tiwai@suse.com
> > Cc: alsa-devel@alsa-project.org; Limonciello, Mario; lgirdwood@gmail.com;
> > linux-kernel@vger.kernel.org; broonie@kernel.org
> > Subject: Re: [PATCH v2 2/2] ASoC: rt715:add Mic Mute LED control support
> >
> >
> > [EXTERNAL EMAIL]
> >
> >
> >
> >
> > > @@ -268,6 +269,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol
> > *kcontrol,
> > > unsigned int reg2 = mc->rreg;
> > > unsigned int reg = mc->reg;
> > > unsigned int max = mc->max;
> > > + unsigned int val0, val1;
> > > int err;
> > >
> > > val = ucontrol->value.integer.value[0]; @@ -286,7 +288,22 @@ static
> > > int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol,
> > > if (err < 0)
> > > return err;
> > > }
> > > -
> > > +#if IS_ENABLED(CONFIG_DELL_PRIVACY)
> > > + /* Privacy LED Trigger State Changed by muted/unmute switch */
> > > + if (mc->invert) {
> > > + val0 = ucontrol->value.integer.value[0];
> > > + val1 = ucontrol->value.integer.value[1];
> > > + if (val0 == 1 && val1 == 1) {
> > > + rt715->micmute_led = LED_OFF;
> > > + ledtrig_audio_set(LED_AUDIO_MICMUTE,
> > > + rt715->micmute_led ? LED_ON :
> > LED_OFF);
> > > + } else if (val0 == 0 && val1 == 0) {
> > > + rt715->micmute_led = LED_ON;
> > > + ledtrig_audio_set(LED_AUDIO_MICMUTE,
> > > + rt715->micmute_led ? LED_ON :
> > LED_OFF);
> > > + }
> > > + }
> > > +#endif
> >
> > Should this be activated for specific DMI quirks? This driver is used in
> non-Dell
> > platforms (I am thinking of Intel RVPs or Realtek daughterboards), I am not
> > sure if a build-time behavior change makes sense.
> >
> > Or conversely could we just set the LEDs unconditionally if doing so is
> > harmless?
>
> The current mic mute led setting path is not common used for other vendors,
> just Dell platform
> support this mic mute led set operation.
>
> Do you think that I need to add one DMI quirk in the next version ?
> If so, I can add that.
>
>


In the HDA audio case this is modeled off of, the code runs whether or not a
vendor has support for a mic mute LED. The calls to ledtrig_audio_set should
be a no-op. I agree with @Pierre-Louis Bossart in this case, we should just
be running it whether or not dell-privacy is compiled in. If another vendor
chooses to add LED support they'll just need to set up their ledtrig supported
backend and not change codec code.
\
 
 \ /
  Last update: 2021-01-12 15:50    [W:0.077 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site