lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
Date
Configuration was correct enough to work with the pre-configuration done by
uboot. While at it, also document the location.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index caa279608803..e17c75c360f2 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -396,7 +396,7 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
- MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
>;
};

@@ -543,6 +543,7 @@
};

&uart1 {
+ /* J4, through-holes */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
--
2.20.1
\
 
 \ /
  Last update: 2021-01-13 00:17    [W:0.073 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site