lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH v3 05/16] cxl/mem: Map memory device registers
On Tue, Jan 12, 2021 at 11:21 AM Ben Widawsky <ben.widawsky@intel.com> wrote:
>
> On 21-01-12 19:13:42, Jonathan Cameron wrote:
> > On Mon, 11 Jan 2021 14:51:09 -0800
> > Ben Widawsky <ben.widawsky@intel.com> wrote:
> >
> > > All the necessary bits are initialized in order to find and map the
> > > register space for CXL Memory Devices. This is accomplished by using the
> > > Register Locator DVSEC (CXL 2.0 - 8.1.9.1) to determine which PCI BAR to
> > > use, and how much of an offset from that BAR should be added.
> > >
> > > If the memory device registers are found and mapped a new internal data
> > > structure tracking device state is allocated.
> > >
> > > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> >
> > Some issues with managed allocations being manually freed in remove.
> > It shouldn't be necessary to do that.
> >
> > > ---
> > > drivers/cxl/cxl.h | 17 ++++++++
> > > drivers/cxl/mem.c | 100 +++++++++++++++++++++++++++++++++++++++++++++-
> > > drivers/cxl/pci.h | 14 +++++++
> > > 3 files changed, 130 insertions(+), 1 deletion(-)
> > > create mode 100644 drivers/cxl/cxl.h
> > >
> > > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> > > new file mode 100644
> > > index 000000000000..d81d0ba4617c
> > > --- /dev/null
> > > +++ b/drivers/cxl/cxl.h
> > > @@ -0,0 +1,17 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/* Copyright(c) 2020 Intel Corporation. */
> > > +
> > > +#ifndef __CXL_H__
> > > +#define __CXL_H__
> > > +
> > > +/**
> > > + * struct cxl_mem - A CXL memory device
> > > + * @pdev: The PCI device associated with this CXL device.
> > > + * @regs: IO mappings to the device's MMIO
> > > + */
> > > +struct cxl_mem {
> > > + struct pci_dev *pdev;
> > > + void __iomem *regs;
> > > +};
> > > +
> > > +#endif
> > > diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> > > index 005404888942..8301db34d2ff 100644
> > > --- a/drivers/cxl/mem.c
> > > +++ b/drivers/cxl/mem.c
> > > @@ -5,6 +5,58 @@
> > > #include <linux/io.h>
> > > #include "acpi.h"
> > > #include "pci.h"
> > > +#include "cxl.h"
> > > +
> > > +/**
> > > + * cxl_mem_create() - Create a new &struct cxl_mem.
> > > + * @pdev: The pci device associated with the new &struct cxl_mem.
> > > + * @reg_lo: Lower 32b of the register locator
> > > + * @reg_hi: Upper 32b of the register locator.
> > > + *
> > > + * Return: The new &struct cxl_mem on success, NULL on failure.
> > > + *
> > > + * Map the BAR for a CXL memory device. This BAR has the memory device's
> > > + * registers for the device as specified in CXL specification.
> > > + */
> > > +static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo,
> > > + u32 reg_hi)
> > > +{
> > > + struct device *dev = &pdev->dev;
> > > + struct cxl_mem *cxlm;
> > > + void __iomem *regs;
> > > + u64 offset;
> > > + u8 bar;
> > > + int rc;
> > > +
> > > + offset = ((u64)reg_hi << 32) | (reg_lo & CXL_REGLOC_ADDR_MASK);
> > > + bar = (reg_lo >> CXL_REGLOC_BIR_SHIFT) & CXL_REGLOC_BIR_MASK;
> > > +
> > > + /* Basic sanity check that BAR is big enough */
> > > + if (pci_resource_len(pdev, bar) < offset) {
> > > + dev_err(dev, "BAR%d: %pr: too small (offset: %#llx)\n", bar,
> > > + &pdev->resource[bar], (unsigned long long)offset);
> > > + return NULL;
> > > + }
> > > +
> > > + rc = pcim_iomap_regions(pdev, BIT(bar), pci_name(pdev));
> > > + if (rc != 0) {
> > > + dev_err(dev, "failed to map registers\n");
> > > + return NULL;
> > > + }
> > > +
> > > + cxlm = devm_kzalloc(&pdev->dev, sizeof(*cxlm), GFP_KERNEL);
> > > + if (!cxlm) {
> > > + dev_err(dev, "No memory available\n");
> > > + return NULL;
> > > + }
> > > +
> > > + regs = pcim_iomap_table(pdev)[bar];
> > > + cxlm->pdev = pdev;
> > > + cxlm->regs = regs + offset;
> > > +
> > > + dev_dbg(dev, "Mapped CXL Memory Device resource\n");
> > > + return cxlm;
> > > +}
> > >
> > > static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
> > > {
> > > @@ -33,7 +85,8 @@ static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
> > > static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > {
> > > struct device *dev = &pdev->dev;
> > > - int rc, regloc;
> > > + struct cxl_mem *cxlm;
> > > + int rc, regloc, i;
> > >
> > > rc = cxl_bus_acquire(pdev);
> > > if (rc != 0) {
> > > @@ -41,15 +94,59 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > > return rc;
> > > }
> > >
> > > + rc = pcim_enable_device(pdev);
> > > + if (rc)
> > > + return rc;
> > > +
> > > regloc = cxl_mem_dvsec(pdev, PCI_DVSEC_ID_CXL_REGLOC);
> > > if (!regloc) {
> > > dev_err(dev, "register location dvsec not found\n");
> > > return -ENXIO;
> > > }
> > > + regloc += 0xc; /* Skip DVSEC + reserved fields */
> > > +
> > > + rc = -ENXIO;
> > > + for (i = regloc; i < regloc + 0x24; i += 8) {
> > > + u32 reg_lo, reg_hi;
> > > + u8 reg_type;
> > > +
> > > + /* "register low and high" contain other bits */
> > > + pci_read_config_dword(pdev, i, &reg_lo);
> > > + pci_read_config_dword(pdev, i + 4, &reg_hi);
> > > +
> > > + reg_type =
> > > + (reg_lo >> CXL_REGLOC_RBI_SHIFT) & CXL_REGLOC_RBI_MASK;
> > > +
> > > + if (reg_type == CXL_REGLOC_RBI_MEMDEV) {
> > > + rc = 0;
> > > + cxlm = cxl_mem_create(pdev, reg_lo, reg_hi);
> > > + if (!cxlm)
> > > + rc = -ENODEV;
> > > + break;
> > > + }
> > > + }
> > > +
> > > + if (rc)
> > > + return rc;
> > >
> > > + pci_set_drvdata(pdev, cxlm);
> > After below cleanup, not needed yet..
> >
> > > return 0;
> > > }
> > >
> > > +static void cxl_mem_remove(struct pci_dev *pdev)
> > > +{
> > > + struct cxl_mem *cxlm;
> > > +
> > > + cxlm = pci_get_drvdata(pdev);
> > > + if (!cxlm)
> > > + return;
> > > +
> > > + kfree(cxlm);
> >
> > There is bunch of unwinding here that I'd expect to see in error paths
> > for probe but it's not there... Which made me wonder.
> > So pcim_iounmap_regions is a managed interface, why are call it by
> > hand? Same is true of the allocation of cxlm above. So currently this
> > remove isn't doing anything useful.
> >
> > > +
> > > + pcim_iounmap_regions(pdev, ~0);
> > > + pci_set_drvdata(pdev, NULL);
> >
> > This hasn't been needed for a long time. Example of removal of similar...
> > http://patchwork.ozlabs.org/project/netdev/patch/005801ceaec1$6b8d3320$42a79960$%25han@samsung.com/
> >
>
> Thanks. I copy pasted it from a driver that obviously hasn't been updated yet
> :-)
>
> The kfree is still necessary though, right? Earlier in development, I just freed
> it immediately after creation (this patch is obviously not super useful
> functionally, but serves nicely for review).
>
> So we can remove the actual allocation from this patch and move it to later if
> you think it makes a big difference. My preference is to just leave it doing the
> kfree and call it good.

devm obviates the need for a cxl_mem_remove() to undo cxl_mem_probe()
actions. This was all devm clean in v2. The other allocation done in
the probe path is cxl_memdev() allocation, but that is undone by a
devm_add_action_or_reset() to unregister the device along with typical
device reference count rules.

\
 
 \ /
  Last update: 2021-01-12 22:54    [W:0.109 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site