lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 02/15] soc: qcom: spm: Implement support for SAWv4.1, SDM630/660 L2 AVS
Date
Implement the support for SAW v4.1, used in at least MSM8998,
SDM630, SDM660 and APQ variants and, while at it, also add the
configuration for the SDM630/660 Silver and Gold cluster L2
Adaptive Voltage Scaler: this is also one of the prerequisites
to allow the OSM controller to perform DCVS.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
drivers/soc/qcom/spm.c | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index 0c8aa9240c41..843732d12c54 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -32,9 +32,28 @@ enum spm_reg {
SPM_REG_SEQ_ENTRY,
SPM_REG_SPM_STS,
SPM_REG_PMIC_STS,
+ SPM_REG_AVS_CTL,
+ SPM_REG_AVS_LIMIT,
SPM_REG_NR,
};

+static const u16 spm_reg_offset_v4_1[SPM_REG_NR] = {
+ [SPM_REG_AVS_CTL] = 0x904,
+ [SPM_REG_AVS_LIMIT] = 0x908,
+};
+
+static const struct spm_reg_data spm_reg_660_gold_l2 = {
+ .reg_offset = spm_reg_offset_v4_1,
+ .avs_ctl = 0x1010031,
+ .avs_limit = 0x4580458,
+};
+
+static const struct spm_reg_data spm_reg_660_silver_l2 = {
+ .reg_offset = spm_reg_offset_v4_1,
+ .avs_ctl = 0x101c031,
+ .avs_limit = 0x4580458,
+};
+
static const u16 spm_reg_offset_v2_1[SPM_REG_NR] = {
[SPM_REG_CFG] = 0x08,
[SPM_REG_SPM_CTL] = 0x30,
@@ -126,6 +145,10 @@ void spm_set_low_power_mode(struct spm_driver_data *drv,
}

static const struct of_device_id spm_match_table[] = {
+ { .compatible = "qcom,sdm660-gold-saw2-v4.1-l2",
+ .data = &spm_reg_660_gold_l2 },
+ { .compatible = "qcom,sdm660-silver-saw2-v4.1-l2",
+ .data = &spm_reg_660_silver_l2 },
{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",
.data = &spm_reg_8974_8084_cpu },
{ .compatible = "qcom,apq8084-saw2-v2.1-cpu",
@@ -169,6 +192,8 @@ static int spm_dev_probe(struct platform_device *pdev)
* CPU was held in reset, the reset signal could trigger the SPM state
* machine, before the sequences are completely written.
*/
+ spm_register_write(drv, SPM_REG_AVS_CTL, drv->reg_data->avs_ctl);
+ spm_register_write(drv, SPM_REG_AVS_LIMIT, drv->reg_data->avs_limit);
spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
@@ -178,7 +203,8 @@ static int spm_dev_probe(struct platform_device *pdev)
drv->reg_data->pmic_data[1]);

/* Set up Standby as the default low power mode */
- spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+ if (drv->reg_data->reg_offset[SPM_REG_SPM_CTL])
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);

return 0;
}
--
2.29.2
\
 
 \ /
  Last update: 2021-01-12 19:22    [W:0.148 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site