lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 5/5] drivers/soc/litex: make 'litex_[set|get]_reg()' methods private
Date
The 'litex_[set|get]_reg()' methods use the 'reg_size' parameter to
specify the width of the LiteX CSR (MMIO) register being accessed.

Since 'u64' is the widest data being supported, the value of 'reg_size'
MUST be between 1 and sizeof(u64), which SHOULD be checked at runtime
if these methods are publicly available for use by other LiteX device
drivers.

At the same time, none of the existing (or foreseeable) LiteX device
drivers have a need to access registers whose size is unknown during
compilation. As such, all LiteX device drivers should use fixed-width
accessor methods such as 'litex_[write|read][8|16|32|64]()'.

This patch renames 'litex_[set|get]_reg()' to '_litex_[set|get]_reg()',
indicating that they should NOT be directly called from outside of
the 'include/linux/litex.h' header file.

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
---

Changes since v5:
- fixed typo in "caller is responsible..." comments

drivers/soc/litex/Kconfig | 2 +-
include/linux/litex.h | 35 ++++++++++++++++++++---------------
2 files changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/soc/litex/Kconfig b/drivers/soc/litex/Kconfig
index 973f8d2fe1a7..b9b3d51ea7df 100644
--- a/drivers/soc/litex/Kconfig
+++ b/drivers/soc/litex/Kconfig
@@ -11,7 +11,7 @@ config LITEX_SOC_CONTROLLER
select LITEX
help
This option enables the SoC Controller Driver which verifies
- LiteX CSR access and provides common litex_get_reg/litex_set_reg
+ LiteX CSR access and provides common litex_[read|write]*
accessors.
All drivers that use functions from litex.h must depend on
LITEX.
diff --git a/include/linux/litex.h b/include/linux/litex.h
index 3456d527f644..5ea9ccf5cce4 100644
--- a/include/linux/litex.h
+++ b/include/linux/litex.h
@@ -59,21 +59,25 @@ static inline u32 _read_litex_subregister(void __iomem *addr)
((off) + _litex_num_subregs(size) * LITEX_SUBREG_ALIGN)

/*
- * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
- * of writing to/reading from the LiteX CSR in a single place that can be
- * then reused by all LiteX drivers.
+ * The purpose of `_litex_[set|get]_reg()` is to implement the logic of
+ * writing to/reading from the LiteX CSR in a single place that can be then
+ * reused by all LiteX drivers via the `litex_[write|read][8|16|32|64]()`
+ * accessors for the appropriate data width.
+ * NOTE: direct use of `_litex_[set|get]_reg()` by LiteX drivers is strongly
+ * discouraged, as they perform no error checking on the requested data width!
*/

/**
- * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register)
+ * _litex_set_reg() - Writes a value to the LiteX CSR (Control&Status Register)
* @reg: Address of the CSR
* @reg_size: The width of the CSR expressed in the number of bytes
* @val: Value to be written to the CSR
*
* This function splits a single (possibly multi-byte) LiteX CSR write into
* a series of subregister writes with a proper offset.
+ * NOTE: caller is responsible for ensuring (0 < reg_size <= sizeof(u64)).
*/
-static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
+static inline void _litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
{
u8 shift = _litex_num_subregs(reg_size) * LITEX_SUBREG_SIZE_BIT;

@@ -85,7 +89,7 @@ static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
}

/**
- * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register)
+ * _litex_get_reg() - Reads a value of the LiteX CSR (Control&Status Register)
* @reg: Address of the CSR
* @reg_size: The width of the CSR expressed in the number of bytes
*
@@ -93,8 +97,9 @@ static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
*
* This function generates a series of subregister reads with a proper offset
* and joins their results into a single (possibly multi-byte) LiteX CSR value.
+ * NOTE: caller is responsible for ensuring (0 < reg_size <= sizeof(u64)).
*/
-static inline u64 litex_get_reg(void __iomem *reg, size_t reg_size)
+static inline u64 _litex_get_reg(void __iomem *reg, size_t reg_size)
{
u64 r;
u8 i;
@@ -110,42 +115,42 @@ static inline u64 litex_get_reg(void __iomem *reg, size_t reg_size)

static inline void litex_write8(void __iomem *reg, u8 val)
{
- litex_set_reg(reg, sizeof(u8), val);
+ _litex_set_reg(reg, sizeof(u8), val);
}

static inline void litex_write16(void __iomem *reg, u16 val)
{
- litex_set_reg(reg, sizeof(u16), val);
+ _litex_set_reg(reg, sizeof(u16), val);
}

static inline void litex_write32(void __iomem *reg, u32 val)
{
- litex_set_reg(reg, sizeof(u32), val);
+ _litex_set_reg(reg, sizeof(u32), val);
}

static inline void litex_write64(void __iomem *reg, u64 val)
{
- litex_set_reg(reg, sizeof(u64), val);
+ _litex_set_reg(reg, sizeof(u64), val);
}

static inline u8 litex_read8(void __iomem *reg)
{
- return litex_get_reg(reg, sizeof(u8));
+ return _litex_get_reg(reg, sizeof(u8));
}

static inline u16 litex_read16(void __iomem *reg)
{
- return litex_get_reg(reg, sizeof(u16));
+ return _litex_get_reg(reg, sizeof(u16));
}

static inline u32 litex_read32(void __iomem *reg)
{
- return litex_get_reg(reg, sizeof(u32));
+ return _litex_get_reg(reg, sizeof(u32));
}

static inline u64 litex_read64(void __iomem *reg)
{
- return litex_get_reg(reg, sizeof(u64));
+ return _litex_get_reg(reg, sizeof(u64));
}

#endif /* _LINUX_LITEX_H */
--
2.26.2
\
 
 \ /
  Last update: 2021-01-12 18:35    [W:0.075 / U:1.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site