lkml.org 
[lkml]   [2021]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 02/15] drm/vc4: hdmi: Move hdmi reset to bind
Date
From: Dom Cobley <popcornmix@gmail.com>

The hdmi reset got moved to a later point in the commit 9045e91a476b
("drm/vc4: hdmi: Add reset callback").

However, the reset now occurs after vc4_hdmi_cec_init and so tramples
the setup of registers like HDMI_CEC_CNTRL_1

This only affects pi0-3 as on pi4 the cec registers are in a separate
block

Fixes: 9045e91a476b ("drm/vc4: hdmi: Add reset callback")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 2e5449b25ce4..cb4594e7df6f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -779,9 +779,6 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
return;
}

- if (vc4_hdmi->variant->reset)
- vc4_hdmi->variant->reset(vc4_hdmi);
-
if (vc4_hdmi->variant->phy_init)
vc4_hdmi->variant->phy_init(vc4_hdmi, vc4_conn_state);

@@ -1874,6 +1871,9 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4_hdmi->disable_wifi_frequencies =
of_property_read_bool(dev->of_node, "wifi-2.4ghz-coexistence");

+ if (vc4_hdmi->variant->reset)
+ vc4_hdmi->variant->reset(vc4_hdmi);
+
pm_runtime_enable(dev);

drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
--
2.29.2
\
 
 \ /
  Last update: 2021-01-11 15:24    [W:0.328 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site