lkml.org 
[lkml]   [2021]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/3] arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E
On Mon, Jan 11, 2021 at 3:50 PM Heiko Stübner <heiko@sntech.de> wrote:
>
> Am Montag, 11. Januar 2021, 04:27:47 CET schrieb Chen-Yu Tsai:
> > On Mon, Jan 11, 2021 at 4:06 AM Heiko Stübner <heiko@sntech.de> wrote:
> > >
> > > Hi,
> > >
> > > Am Sonntag, 10. Januar 2021, 16:37:15 CET schrieb Chen-Yu Tsai:
> > > > > > + vcc_sd: sdmmc-regulator {
> > > > > > + compatible = "regulator-fixed";
> > > > > > + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
> > > > > > + pinctrl-names = "default";
> > > > > > + pinctrl-0 = <&sdmmc0m1_pin>;
> > > > >
> > > > > > + regulator-boot-on;
> > > > > > + regulator-name = "vcc_sd";
> > > > >
> > > > > regulator-name above other regulator properties
> > > >
> > > > That is actually what I was used to, but some other rockchip dts files
> > > > have all the properties sorted alphabetically. So I stuck with what I
> > > > saw.
> > >
> > > I try to keep it alphabetical except for the exceptions :-D .
> > >
> > > regulator-name is such an exception. Similar to compatibles, the
> > > regulator-name is an entry needed to see if you're at the right node,
> > > so I really like it being the topmost regulator-foo property - just makes
> > > reading easier.
> > >
> > > (same for the compatible first, then regs, interrupts parts, as well
> > > as "status-last")
> > >
> > > But oftentimes, I just fix the ordering when applying - but seem to have
> > > missed this somewhere in those "other Rockchip dts files" ;-) .
> >
> > I was slightly confused. I looked again and yes regulator-name is always the
> > first regulator related property. What's off is that in some cases min/max
> > voltage comes before always-on/boot-on, and in others vice versa.
> >
> > For example in the Rock64 and ROC-RK3328-CC device trees, in the fixed
> > regulators, always-on/boot-on come before min/max voltage, while in the
> > PMIC the other order is used.
>
> That's likely undecidednes on my part ;-)
>
> There could be an argument for a "name, voltages, flags" sorting, but on
> the other hand just keeping it alphabetical with the naming on top
> creates less special cases.

And min before max? :D

\
 
 \ /
  Last update: 2021-01-11 09:07    [W:1.578 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site