lkml.org 
[lkml]   [2021]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified
On Fri, Jan 8, 2021 at 6:30 PM Jonathan Neuschäfer
<j.neuschaefer@gmx.net> wrote:
>
> The NPCM750 Timer/Watchdog Controller has multiple interrupt lines,
> connected to multiple timers. The driver uses timer 0 for timer
> interrupts, so the interrupt line corresponding to timer 0 should be
> specified in DT.
>
> I removed the mention of "flags for falling edge", because the timer
> controller uses high-level interrupts rather than falling-edge
> interrupts, and whether flags should be specified is up the interrupt
> controller's DT binding.
>
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by Avi Fishman <avifishman70@gmail.com>
> ---
>
> v2:
> - Fix a typo in the word "watchdog"
> ---
> .../devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
> index ea22dfe485bee..97258f1a1505b 100644
> --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
> +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
> @@ -6,8 +6,7 @@ timer counters.
> Required properties:
> - compatible : "nuvoton,npcm750-timer" for Poleg NPCM750.
> - reg : Offset and length of the register set for the device.
> -- interrupts : Contain the timer interrupt with flags for
> - falling edge.
> +- interrupts : Contain the timer interrupt of timer 0.
> - clocks : phandle of timer reference clock (usually a 25 MHz clock).
>
> Example:
> --
> 2.29.2
>


--
Regards,
Avi

\
 
 \ /
  Last update: 2021-01-10 11:23    [W:0.077 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site