lkml.org 
[lkml]   [2021]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: dts: freescale: sl28: add variant 1
On Tue, Dec 29, 2020 at 01:03:21PM +0100, Michael Walle wrote:
> There is a new variant 1 of this board available. It features up to four
> SerDes lanes for customer use. Add a new device tree which features just
> the basic peripherals. A customer will then have to modify or append to
> this device tree.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../fsl-ls1028a-kontron-sl28-var1.dts | 61 +++++++++++++++++++
> 2 files changed, 62 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 6f0777ee6cd6..79cb0025fcc6 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
> new file mode 100644
> index 000000000000..52f2f3ffdce1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree file for the Kontron SMARC-sAL28 board.
> + *
> + * This is for the network variant 1 which has one ethernet port. It is
> + * different than the base variant, which also has one port, but here the
> + * port is connected via RGMII. This port is not TSN aware.
> + * None of the four SerDes lanes are used by the module, instead they are
> + * all led out to the carrier for customer use.
> + *
> + * Copyright (C) 2020 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a-kontron-sl28.dts"
> +#include <dt-bindings/net/qca-ar803x.h>
> +
> +/ {
> + model = "Kontron SMARC-sAL28 (4 Lanes)";
> + compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
> +};
> +
> +&enetc_port0 {
> + status = "disabled";
> + /delete-property/ phy-handle;
> + /delete-node/ mdio;

As it's disabled anyway, why do we bother to delete the property and
child node?

> +};
> +
> +

One newline is enough.

> +&enetc_port1 {
> + phy-handle = <&phy0>;
> + phy-connection-type = "rgmii-id";
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy0: ethernet-phy@4 {
> + reg = <0x4>;
> + eee-broken-1000t;
> + eee-broken-100tx;
> +

Unnecessary newline.

> + qca,clk-out-frequency = <125000000>;
> + qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
> +

Ditto

Shawn

> + vddio-supply = <&vddh>;
> +
> + vddio: vddio-regulator {
> + regulator-name = "VDDIO";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddh: vddh-regulator {
> + regulator-name = "VDDH";
> + };
> + };
> + };
> +};
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2021-01-11 02:36    [W:0.092 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site