lkml.org 
[lkml]   [2020]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] extcon: ptn5150: Use defines for registers
Date
The register addresses are not continuous, so use simple defines for
them. This also makes it easier to find the address for register.

No functional change.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/extcon/extcon-ptn5150.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index dda5b3a3a908..1b68f56d8372 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -19,18 +19,16 @@
#include <linux/gpio/consumer.h>

/* PTN5150 registers */
-enum ptn5150_reg {
- PTN5150_REG_DEVICE_ID = 0x01,
- PTN5150_REG_CONTROL,
- PTN5150_REG_INT_STATUS,
- PTN5150_REG_CC_STATUS,
- PTN5150_REG_CON_DET = 0x09,
- PTN5150_REG_VCONN_STATUS,
- PTN5150_REG_RESET,
- PTN5150_REG_INT_MASK = 0x18,
- PTN5150_REG_INT_REG_STATUS,
- PTN5150_REG_END,
-};
+#define PTN5150_REG_DEVICE_ID 0x01
+#define PTN5150_REG_CONTROL 0x02
+#define PTN5150_REG_INT_STATUS 0x03
+#define PTN5150_REG_CC_STATUS 0x04
+#define PTN5150_REG_CON_DET 0x09
+#define PTN5150_REG_VCONN_STATUS 0x0a
+#define PTN5150_REG_RESET 0x0b
+#define PTN5150_REG_INT_MASK 0x18
+#define PTN5150_REG_INT_REG_STATUS 0x19
+#define PTN5150_REG_END PTN5150_REG_INT_REG_STATUS

#define PTN5150_DFP_ATTACHED 0x1
#define PTN5150_UFP_ATTACHED 0x2
--
2.17.1
\
 
 \ /
  Last update: 2020-09-09 19:20    [W:0.066 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site