lkml.org 
[lkml]   [2020]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/15] Tegra XHCI controller ELPG support
Date
Tegra XHCI controler can be placed in ELPG (Engine Level PowerGated)
state for power saving when all of the connected USB devices are in
suspended state. This patch series includes clk, phy and pmc changes
that are required for properly place controller in ELPG and bring
controller out of ELPG.

JC Kuo (15):
clk: tegra: Add PLLE HW power sequencer control
clk: tegra: Don't enable PLLE HW sequencer at init
phy: tegra: xusb: Move usb3 port init for Tegra210
phy: tegra: xusb: tegra210: Do not reset UPHY PLL
phy: tegra: xusb: Rearrange UPHY init on Tegra210
phy: tegra: xusb: Add Tegra210 lane_iddq operation
phy: tegra: xusb: Add sleepwalk and suspend/resume
soc/tegra: pmc: Provide usb sleepwalk register map
arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop
phy: tegra: xusb: Add wake/sleepwalk for Tegra210
phy: tegra: xusb: Tegra210 host mode VBUS control
phy: tegra: xusb: Add wake/sleepwalk for Tegra186
arm64: tegra210/tegra186/tegra194: XUSB PADCTL irq
usb: host: xhci-tegra: Unlink power domain devices
xhci: tegra: Enable ELPG for runtime/system PM

arch/arm64/boot/dts/nvidia/tegra186.dtsi | 1 +
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 1 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 +
drivers/clk/tegra/clk-pll.c | 12 -
drivers/clk/tegra/clk-tegra210.c | 51 +
drivers/phy/tegra/xusb-tegra186.c | 626 +++++++
drivers/phy/tegra/xusb-tegra210.c | 1968 +++++++++++++++++-----
drivers/phy/tegra/xusb.c | 81 +-
drivers/phy/tegra/xusb.h | 21 +-
drivers/soc/tegra/pmc.c | 95 ++
drivers/usb/host/xhci-tegra.c | 572 +++++--
include/linux/clk/tegra.h | 2 +
include/linux/phy/tegra/xusb.h | 8 +
13 files changed, 2907 insertions(+), 533 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2020-09-09 10:15    [W:0.206 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site