lkml.org 
[lkml]   [2020]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] pinctrl: aspeed: Use the right pinconf mask
Date
The Aspeed pinconf data structures are split into 'conf' and 'map'
types, where the 'conf' struct defines which register and bitfield to
manipulate, while the 'map' struct defines what value to write to
the register and bitfield.

Both structs have a mask member, and the wrong mask was being used to
tell the regmap which bits to update.

A todo is to look at whether we can remove the mask from the 'map'
struct.

Cc: Johnny Huang <johnny_huang@aspeedtech.com>
Fixes: 5f52c853847f ("pinctrl: aspeed: Use masks to describe pinconf bitfields")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 2e0260c1a57c..6a94eaecf638 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -534,7 +534,7 @@ int aspeed_pin_config_set(struct pinctrl_dev *pctldev, unsigned int offset,
val = pmap->val << __ffs(pconf->mask);

rc = regmap_update_bits(pdata->scu, pconf->reg,
- pmap->mask, val);
+ pconf->mask, val);

if (rc < 0)
return rc;
--
2.25.1
\
 
 \ /
  Last update: 2020-09-10 04:59    [W:0.138 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site