lkml.org 
[lkml]   [2020]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] arm: dts: qcom: ipq4019: add more labels
Date
Lets add labels to more commonly used nodes for easier modification in board DTS files.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---
Changes since v1:
* Drop include that does not exist

arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 3d056aada8d1..7bf1da916f25 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -190,7 +190,7 @@ gcc: clock-controller@1800000 {
reg = <0x1800000 0x60000>;
};

- rng@22000 {
+ prng: rng@22000 {
compatible = "qcom,prng";
reg = <0x22000 0x140>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
@@ -310,7 +310,7 @@ cryptobam: dma@8e04000 {
status = "disabled";
};

- crypto@8e3a000 {
+ crypto: crypto@8e3a000 {
compatible = "qcom,crypto-v5.1";
reg = <0x08e3a000 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
@@ -396,7 +396,7 @@ blsp1_uart2: serial@78b0000 {
dma-names = "rx", "tx";
};

- watchdog@b017000 {
+ watchdog: watchdog@b017000 {
compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
reg = <0xb017000 0x40>;
clocks = <&sleep_clk>;
--
2.26.2
\
 
 \ /
  Last update: 2020-09-09 21:57    [W:0.106 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site