lkml.org 
[lkml]   [2020]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/3] irqchip: dw-apb-ictl: support hierarchy irq domain
From
Date


On 2020/9/8 15:41, Marc Zyngier wrote:
> On 2020-09-08 08:11, Zhen Lei wrote:
>> Add support to use dw-apb-ictl as primary interrupt controller.
>>
>> Suggested-by: Marc Zyngier <maz@kernel.org>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> Tested-by: Haoyu Lv <lvhaoyu@huawei.com>
>> ---
>>  drivers/irqchip/Kconfig           |  2 +-
>>  drivers/irqchip/irq-dw-apb-ictl.c | 75 +++++++++++++++++++++++++++++--
>>  2 files changed, 73 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
>> index bfc9719dbcdc..7c2d1c8fa551 100644
>> --- a/drivers/irqchip/Kconfig
>> +++ b/drivers/irqchip/Kconfig
>> @@ -148,7 +148,7 @@ config DAVINCI_CP_INTC
>>  config DW_APB_ICTL
>>      bool
>>      select GENERIC_IRQ_CHIP
>> -    select IRQ_DOMAIN
>> +    select IRQ_DOMAIN_HIERARCHY
>>
>>  config FARADAY_FTINTC010
>>      bool
>> diff --git a/drivers/irqchip/irq-dw-apb-ictl.c
>> b/drivers/irqchip/irq-dw-apb-ictl.c
>> index aa6214da0b1f..405861322596 100644
>> --- a/drivers/irqchip/irq-dw-apb-ictl.c
>> +++ b/drivers/irqchip/irq-dw-apb-ictl.c
>> @@ -17,6 +17,7 @@
>>  #include <linux/irqchip/chained_irq.h>
>>  #include <linux/of_address.h>
>>  #include <linux/of_irq.h>
>> +#include <asm/exception.h>
>>
>>  #define APB_INT_ENABLE_L    0x00
>>  #define APB_INT_ENABLE_H    0x04
>> @@ -26,6 +27,30 @@
>>  #define APB_INT_FINALSTATUS_H    0x34
>>  #define APB_INT_BASE_OFFSET    0x04
>>
>> +/*
>> + * irq domain of the primary interrupt controller. Currently, only one is
>> + * supported.
>
> By definition, there is only one primary interrupt controller.

OK, I will delete the comment "Currently, only one is supported". Should I replace
it with your commend above?

>
>> + */
>> +static struct irq_domain *dw_apb_ictl_irq_domain;
>> +
>> +static void __exception_irq_entry dw_apb_ictl_handle_irq(struct pt_regs *regs)
>> +{
>> +    struct irq_domain *d = dw_apb_ictl_irq_domain;
>> +    int n;
>> +
>> +    for (n = 0; n < d->revmap_size; n += 32) {
>> +        struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, n);
>> +        u32 stat = readl_relaxed(gc->reg_base + APB_INT_FINALSTATUS_L);
>> +
>> +        while (stat) {
>> +            u32 hwirq = ffs(stat) - 1;
>> +
>> +            handle_domain_irq(d, hwirq, regs);
>> +            stat &= ~(1 << hwirq);
>
> nit: prefer BIT(hwirq)

OK, I will correct it.

>
>> +        }
>> +    }
>> +}
>> +
>>  static void dw_apb_ictl_handle_irq_cascaded(struct irq_desc *desc)
>>  {
>>      struct irq_domain *d = irq_desc_get_handler_data(desc);
>> @@ -50,6 +75,30 @@ static void dw_apb_ictl_handle_irq_cascaded(struct
>> irq_desc *desc)
>>      chained_irq_exit(chip, desc);
>>  }
>>
>> +static int dw_apb_ictl_irq_domain_alloc(struct irq_domain *domain,
>> unsigned int virq,
>> +                unsigned int nr_irqs, void *arg)
>> +{
>> +    int i, ret;
>> +    irq_hw_number_t hwirq;
>> +    unsigned int type = IRQ_TYPE_NONE;
>> +    struct irq_fwspec *fwspec = arg;
>> +
>> +    ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
>> +    if (ret)
>> +        return ret;
>> +
>> +    for (i = 0; i < nr_irqs; i++)
>> +        irq_map_generic_chip(domain, virq + i, hwirq + i);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct irq_domain_ops dw_apb_ictl_irq_domain_ops = {
>> +    .translate = irq_domain_translate_onecell,
>> +    .alloc = dw_apb_ictl_irq_domain_alloc,
>> +    .free = irq_domain_free_irqs_top,
>> +};
>> +
>>  #ifdef CONFIG_PM
>>  static void dw_apb_ictl_resume(struct irq_data *d)
>>  {
>> @@ -78,11 +127,24 @@ static int __init dw_apb_ictl_init(struct device_node *np,
>>      const struct irq_domain_ops *domain_ops = &irq_generic_chip_ops;
>>      irq_flow_handler_t flow_handler = handle_level_irq;
>>
>> +    if (dw_apb_ictl_irq_domain) {
>> +        pr_err("%pOF: a hierarchy irq domain is already exist.\n", np);
>> +        return -EBUSY;
>
> How can this happen?

Just afraid the users maybe define two primary interrupt controller nodes in dts
by mistake, or maybe mixed with secondary interrupt controller nodes. But an error
maybe reported before when parse devicetree nodes. So I'll just delete it.

>
>> +    }
>> +
>>      /* Map the parent interrupt for the chained handler */
>>      parent_irq = irq_of_parse_and_map(np, 0);
>>      if (parent_irq <= 0) {
>> -        pr_err("%pOF: unable to parse irq\n", np);
>> -        return -EINVAL
>
> Checking for an output interrupt is not the way to check for a chained
> interrupt controller. That's what the parent device_node is for (no
> parent or parent == self denotes a primary controller).

OK, Thank you for the point. I will modify it.

> ;
>> +        /* It's used as secondary interrupt controller */
>> +        if (of_find_property(np, "interrupts", NULL)) {
>> +            pr_err("%pOF: unable to parse irq\n", np);
>> +            return -EINVAL;
>> +        }
>> +
>> +        /* It's used as the primary interrupt controller */
>> +        parent_irq = 0;
>> +        domain_ops = &dw_apb_ictl_irq_domain_ops;
>> +        flow_handler = handle_fasteoi_irq;
>
> Why? This irqchip obviously doesn't support an EOI method since you
> setting it to a NOP callback below. From what I understand, this
> controller should use handle_level_irq, just like its chained version.

OK, I will try to use handle_level_irq().

>
>>      }
>>
>>      ret = of_address_to_resource(np, 0, &r);
>> @@ -145,10 +207,17 @@ static int __init dw_apb_ictl_init(struct device_node *np,
>>          gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
>>          gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit;
>>          gc->chip_types[0].chip.irq_resume = dw_apb_ictl_resume;
>> +        if (!parent_irq)
>> +            gc->chip_types[0].chip.irq_eoi = irq_gc_noop;
>>      }
>>
>> -    irq_set_chained_handler_and_data(parent_irq,
>> +    if (parent_irq) {
>> +        irq_set_chained_handler_and_data(parent_irq,
>>                  dw_apb_ictl_handle_irq_cascaded, domain);
>> +    } else {
>> +        dw_apb_ictl_irq_domain = domain;
>> +        set_handle_irq(dw_apb_ictl_handle_irq);
>> +    }
>>
>>      return 0;
>
> Thanks,
>
>         M.

\
 
 \ /
  Last update: 2020-09-08 11:41    [W:0.059 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site