lkml.org 
[lkml]   [2020]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V2 1/3] pinctrl: imx: Use function callbacks for SCU related functions
Date

> Subject: RE: [PATCH V2 1/3] pinctrl: imx: Use function callbacks for SCU
> related functions
>
> > From: Anson Huang <Anson.Huang@nxp.com>
> > Sent: Monday, September 7, 2020 8:33 PM
> >
> > Use function callbacks for SCU related functions in pinctrl-imx.c in
> > order to support the scenario of PINCTRL_IMX is built in while
> > PINCTRL_IMX_SCU is built as module, all drivers using SCU pinctrl
> > driver need to initialize the SCU related function callback.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > Changes since V1:
> > - split V1 [1/2] patch to 2 patches, this patch does the change of
> > using function
> > callbacks for SCU related functions.
> > ---
> > drivers/pinctrl/freescale/pinctrl-imx.c | 8 +++----
> > drivers/pinctrl/freescale/pinctrl-imx.h | 37
> > +++++++++++++++++------------
> > drivers/pinctrl/freescale/pinctrl-imx8dxl.c | 3 +++
> > drivers/pinctrl/freescale/pinctrl-imx8qm.c | 3 +++
> > drivers/pinctrl/freescale/pinctrl-imx8qxp.c | 3 +++
> > 5 files changed, 35 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c
> > b/drivers/pinctrl/freescale/pinctrl-imx.c
> > index 507e4af..b80c450 100644
> > --- a/drivers/pinctrl/freescale/pinctrl-imx.c
> > +++ b/drivers/pinctrl/freescale/pinctrl-imx.c
> > @@ -373,7 +373,7 @@ static int imx_pinconf_get(struct pinctrl_dev
> *pctldev,
> > const struct imx_pinctrl_soc_info *info = ipctl->info;
> >
> > if (info->flags & IMX_USE_SCU)
> > - return imx_pinconf_get_scu(pctldev, pin_id, config);
> > + return info->imx_pinconf_get(pctldev, pin_id, config);
> > else
> > return imx_pinconf_get_mmio(pctldev, pin_id, config); } @@
> -423,7
> > +423,7 @@ static int imx_pinconf_set(struct pinctrl_dev *pctldev,
> > const struct imx_pinctrl_soc_info *info = ipctl->info;
> >
> > if (info->flags & IMX_USE_SCU)
> > - return imx_pinconf_set_scu(pctldev, pin_id,
> > + return info->imx_pinconf_set(pctldev, pin_id,
> > configs, num_configs);
> > else
> > return imx_pinconf_set_mmio(pctldev, pin_id, @@ -440,7 +440,7
> @@
> > static void imx_pinconf_dbg_show(struct pinctrl_dev *pctldev,
> > int ret;
> >
> > if (info->flags & IMX_USE_SCU) {
> > - ret = imx_pinconf_get_scu(pctldev, pin_id, &config);
> > + ret = info->imx_pinconf_get(pctldev, pin_id, &config);
> > if (ret) {
> > dev_err(ipctl->dev, "failed to get %s pinconf\n",
> > pin_get_name(pctldev, pin_id));
> > @@ -629,7 +629,7 @@ static int imx_pinctrl_parse_groups(struct
> > device_node *np,
> > for (i = 0; i < grp->num_pins; i++) {
> > pin = &((struct imx_pin *)(grp->data))[i];
> > if (info->flags & IMX_USE_SCU)
> > - imx_pinctrl_parse_pin_scu(ipctl, &grp->pins[i],
> > + info->imx_pinctrl_parse_pin(ipctl, &grp->pins[i],
> > pin, &list);
> > else
> > imx_pinctrl_parse_pin_mmio(ipctl, &grp->pins[i], diff --git
> > a/drivers/pinctrl/freescale/pinctrl-imx.h
> > b/drivers/pinctrl/freescale/pinctrl-imx.h
> > index 333d32b..40927ca 100644
> > --- a/drivers/pinctrl/freescale/pinctrl-imx.h
> > +++ b/drivers/pinctrl/freescale/pinctrl-imx.h
> > @@ -75,6 +75,21 @@ struct imx_cfg_params_decode {
> > bool invert;
> > };
> >
> > +/**
> > + * @dev: a pointer back to containing device
> > + * @base: the offset to the controller in virtual memory */ struct
> > +imx_pinctrl {
> > + struct device *dev;
> > + struct pinctrl_dev *pctl;
> > + void __iomem *base;
> > + void __iomem *input_sel_base;
> > + const struct imx_pinctrl_soc_info *info;
> > + struct imx_pin_reg *pin_regs;
> > + unsigned int group_index;
> > + struct mutex mutex;
> > +};
> > +
>
> You seems missed my question in the former patch review.
> Could you clarify a bit why need move this part code?

Please check the mail, I have replied it yestoday as below, the function needs to use imx_pinctrl structure,
so it needs to be moved, otherwise, build will fail.

> Any reason to move this part of code?


It is because below function callback added in imx_pinctrl_soc_info structure need to use imx_pinctrl, otherwise, build will fail.

+ void (*imx_pinctrl_parse_pin)(struct imx_pinctrl *ipctl,

Anson
\
 
 \ /
  Last update: 2020-09-08 07:05    [W:2.051 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site