lkml.org 
[lkml]   [2020]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC
Date
SM8250 SoC uses EPSS block for carrying out the cpufreq duties. Hence, add
support for it in the driver with relevant of_match data.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index de816bcafd33..c3c397cc3dc6 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -285,8 +285,17 @@ static const struct qcom_cpufreq_soc_data qcom_soc_data = {
.lut_row_size = 32,
};

+static const struct qcom_cpufreq_soc_data sm8250_soc_data = {
+ .reg_enable = 0x0,
+ .reg_freq_lut = 0x100,
+ .reg_volt_lut = 0x200,
+ .reg_perf_state = 0x320,
+ .lut_row_size = 4,
+};
+
static const struct of_device_id qcom_cpufreq_hw_match[] = {
{ .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data },
+ { .compatible = "qcom,sm8250-epss", .data = &sm8250_soc_data },
{}
};
MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
--
2.17.1
\
 
 \ /
  Last update: 2020-09-08 09:59    [W:0.210 / U:1.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site