lkml.org 
[lkml]   [2020]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 5/8] rpmsg: introduce reserved rpmsg driver for ns announcement
On Fri, 4 Sep 2020 at 02:28, Arnaud POULIQUEN <arnaud.pouliquen@st.com> wrote:
>
> Hi Mathieu,
>
> On 9/4/20 1:00 AM, Mathieu Poirier wrote:
> > On Tue, Aug 25, 2020 at 06:49:04PM +0200, Arnaud Pouliquen wrote:
> >> The name service announcement should not be linked to the RPMsg virtio bus
> >> but to the RPMsg protocol itself.
> >>
> >> This patch proposes to break the dependency with the RPmsg virtio bus by
> >> the introduction of the reserved RPMsg name service driver which will be in
> >> charge of managing the RPMsg name service announcement.
> >>
> >> This first patch only implements the probe and the RPMsg endpoint to
> >> manage create and release channels remote requests.
> >>
> >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
> >> ---
> >> drivers/rpmsg/Kconfig | 8 ++
> >> drivers/rpmsg/Makefile | 1 +
> >> drivers/rpmsg/rpmsg_internal.h | 17 +++++
> >> drivers/rpmsg/rpmsg_ns.c | 135 +++++++++++++++++++++++++++++++++
> >> 4 files changed, 161 insertions(+)
> >> create mode 100644 drivers/rpmsg/rpmsg_ns.c
> >>
> >> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
> >> index f96716893c2a..c3fc75e6514b 100644
> >> --- a/drivers/rpmsg/Kconfig
> >> +++ b/drivers/rpmsg/Kconfig
> >> @@ -15,6 +15,14 @@ config RPMSG_CHAR
> >> in /dev. They make it possible for user-space programs to send and
> >> receive rpmsg packets.
> >>
> >> +config RPMSG_NS
> >> + tristate "RPMSG name service announcement"
> >> + depends on RPMSG
> >> + help
> >> + Say Y here to enable the support of the name service announcement
> >> + channel that probes the associated RPMsg device on remote endpoint
> >> + service announcement.
> >> +
> >> config RPMSG_MTK_SCP
> >> tristate "MediaTek SCP"
> >> depends on MTK_SCP
> >> diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
> >> index ffe932ef6050..8d452656f0ee 100644
> >> --- a/drivers/rpmsg/Makefile
> >> +++ b/drivers/rpmsg/Makefile
> >> @@ -1,6 +1,7 @@
> >> # SPDX-License-Identifier: GPL-2.0
> >> obj-$(CONFIG_RPMSG) += rpmsg_core.o
> >> obj-$(CONFIG_RPMSG_CHAR) += rpmsg_char.o
> >> +obj-$(CONFIG_RPMSG_NS) += rpmsg_ns.o
> >> obj-$(CONFIG_RPMSG_MTK_SCP) += mtk_rpmsg.o
> >> qcom_glink-objs := qcom_glink_native.o qcom_glink_ssr.o
> >> obj-$(CONFIG_RPMSG_QCOM_GLINK) += qcom_glink.o
> >> diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
> >> index d5ab286d0e5e..641b48f6bf2a 100644
> >> --- a/drivers/rpmsg/rpmsg_internal.h
> >> +++ b/drivers/rpmsg/rpmsg_internal.h
> >> @@ -102,4 +102,21 @@ static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev)
> >> return rpmsg_register_device(rpdev);
> >> }
> >>
> >> +/**
> >> + * rpmsg_ns_register_device() - register name service device based on rpdev
> >> + * @rpdev: prepared rpdev to be used for creating endpoints
> >> + *
> >> + * This function wraps rpmsg_register_device() preparing the rpdev for use as
> >> + * basis for the rpmsg name service device.
> >> + */
> >> +static inline int rpmsg_ns_register_device(struct rpmsg_device *rpdev)
> >> +{
> >> + strcpy(rpdev->id.name, "rpmsg_ns");
> >> + rpdev->driver_override = "rpmsg_ns";
> >> + rpdev->src = RPMSG_NS_ADDR;
> >> + rpdev->dst = RPMSG_NS_ADDR;
> >> +
> >> + return rpmsg_register_device(rpdev);
> >> +}
> >> +
> >> #endif
> >> diff --git a/drivers/rpmsg/rpmsg_ns.c b/drivers/rpmsg/rpmsg_ns.c
> >> new file mode 100644
> >> index 000000000000..3c929b6976a6
> >> --- /dev/null
> >> +++ b/drivers/rpmsg/rpmsg_ns.c
> >> @@ -0,0 +1,135 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Copyright (C) STMicroelectronics 2020 - All Rights Reserved
> >> + */
> >> +#include <linux/device.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/module.h>
> >> +#include <linux/slab.h>
> >> +#include "rpmsg_internal.h"
> >> +
> >> +/**
> >> + * enum rpmsg_ns_flags - dynamic name service announcement flags
> >> + *
> >> + * @RPMSG_NS_CREATE: a new remote service was just created
> >> + * @RPMSG_NS_DESTROY: a known remote service was just destroyed
> >> + */
> >> +enum rpmsg_ns_flags {
> >> + RPMSG_NS_CREATE = 0,
> >> + RPMSG_NS_DESTROY = 1,
> >> +};
> >> +
> >> +/**
> >> + * struct rpmsg_ns_msg - dynamic name service announcement message
> >> + * @name: name of remote service that is published
> >> + * @addr: address of remote service that is published
> >> + * @flags: indicates whether service is created or destroyed
> >> + *
> >> + * This message is sent across to publish a new service, or announce
> >> + * about its removal. When we receive these messages, an appropriate
> >> + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
> >> + * or ->remove() handler of the appropriate rpmsg driver will be invoked
> >> + * (if/as-soon-as one is registered).
> >> + */
> >> +struct rpmsg_ns_msg {
> >> + char name[RPMSG_NAME_SIZE];
> >> + __le32 addr;
> >> + __le32 flags;
> >
> > This is about to get moved to a header file [1] so that the virtualisation people
> > can use the same structures. As such we can't just assume their type is __le32
> > and we can't move them here either. I suggest to move this to
> > include/linux/rpmsg/virtio.h as Guennadi did.
> >
> > [1]. https://patchwork.kernel.org/patch/11749285/
>
> The objective of this patch is to treat the ns annoucement as a service so it should not
> depend on the virtio.

I agree that name service announcement and virtio are disjoint and
should remain as such. That being said I would like to avoid the
proliferation of "struct rpmsg_ns_msg" in the kernel. I am convinced
we can find a middle ground that can work for everyone.

> From my POV we have to separate the header from the payload in term of endianness.
>
> That make sense that the rpmsg_hdr is virtio struct dependent. But the rpmsg_ns_msg
> describes the payload message. The payload message should be fixed by the service itself
> and should not depend on the virualization.
> Here i proposed to fix the payload in little endian for compatibility with the legacy.
> But we also could decide to not fixe the endianess.

I think the only way forward is to take the time to really understand
how the rpmsg_ns_msg is used in [1]. I will do that tomorrow
(Wednesday) or Thursday and I suggest you do the same at one point.

>
> >
> >> +} __packed;
> >> +
> >> +/* Invoked when a name service announcement arrives */
> >> +static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
> >> + void *priv, u32 src)
> >> +{
> >> + struct rpmsg_ns_msg *msg = data;
> >> + struct rpmsg_device *newch;
> >> + struct rpmsg_channel_info chinfo;
> >> + struct device *dev = &rpdev->dev;
> >> + unsigned int flags = le32_to_cpu(msg->flags);
> >
> > I've been staring at this for a long time and I suspect you did too.
> >
> > Can we assume that a name service is running on a virtio implementation? It
> > certainly has been the case so far, and doing so would make this patchset a lot
> > more simple. Otherwise we need to find a way to make this work without
> > losing flexibility, which will make things more complex.
> >
> > What do you think?
>
> I am not sure to understand your point...
> I'm also intertesting in understanding more in details what do you have in mind in term of
> "losing flexibility"?
>

I was referring to the format of the rpmsg_ns_msg and the transport
layer, i.e virtio, Glink or otherwise.

> The purpose of this patchset is to generalize the ns announcement so that it does
> not depend on the implementation. The goal is to avoid that implementations
> rewrite the service.
>
> The vhost patchset is an exemple which is also virtio based. But there are some other
> implementations (exemples below).
>
> Anyway I think the main question associated to this patchset is:
> Is the ns annoucement is a RPMsg service or a virtio RPMsg service?
>
> From my point of view it should be a RPMsg service, that is enbled or
> not, depending on the backend implementation.

I agree.

As I said above I don't think we can move forward with this set and
[1] until we understand how name space services are used in the vhost
driver. That will help us define the rpmsg_ns_msg structure and how
to handle it in a generic way. Otherwise I think the rest of this set
works.

I will get back to you once I have gone through [1].

Thanks,
Mathieu

>
> 2 other ns annoucement service exemples:
> - the mtk_rpmsg driver[1].
> - In ST we have a PoC to extend the rpmsg over a physical serial link [2]. Notice that, with
> this implementation we can have the LE-BE inter-communication use case.
> For this PoC we also defined a common file that does not depend on the virtio[3], so
> an alternative to what Guennadi did in include/linux/rpmsg/virtio.h.
>
> [1]https://elixir.bootlin.com/linux/v5.9-rc3/source/drivers/rpmsg/mtk_rpmsg.c#L45
> [2]https://github.com/arnopo/linux/blob/ELCE_demos/drivers/rpmsg/uart_rpmsg_bus.c
> [3]https://github.com/arnopo/linux/blob/ELCE_demos/drivers/rpmsg/rpmsg_bus_common.c
>
> Thanks,
> Arnaud
>
> >
> >> + int ret;
> >> +
> >> +#if defined(CONFIG_DYNAMIC_DEBUG)
> >> + dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1,
> >> + data, len, true);
> >> +#endif
> >> +
> >> + if (len != sizeof(*msg)) {
> >> + dev_err(dev, "malformed ns msg (%d)\n", len);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + /* Don't trust the remote processor for null terminating the name */
> >> + msg->name[RPMSG_NAME_SIZE - 1] = '\0';
> >> +
> >> + strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
> >> + chinfo.src = RPMSG_ADDR_ANY;
> >> + chinfo.dst = le32_to_cpu(msg->addr);
> >> +
> >> + dev_info(dev, "%sing channel %s addr 0x%x\n",
> >> + (flags & RPMSG_NS_DESTROY) ? "destroy" : "creat",
> >> + msg->name, chinfo.dst);
> >> +
> >> + if (flags & RPMSG_NS_DESTROY) {
> >> + ret = rpmsg_release_channel(rpdev, &chinfo);
> >> + if (ret)
> >> + dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
> >> + } else {
> >> + newch = rpmsg_create_channel(rpdev, &chinfo);
> >> + if (!newch)
> >> + dev_err(dev, "rpmsg_create_channel failed\n");
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int rpmsg_ns_probe(struct rpmsg_device *rpdev)
> >> +{
> >> + struct rpmsg_channel_info ns_chinfo;
> >> + struct rpmsg_endpoint *ns_ept;
> >> +
> >> + ns_chinfo.src = RPMSG_NS_ADDR;
> >> + ns_chinfo.dst = RPMSG_NS_ADDR;
> >> + strcpy(ns_chinfo.name, "name_service");
> >> +
> >> + /*
> >> + * Create the NS announcement service endpoint associated to the RPMsg
> >> + * device. The endpoint will be automatically destroyed when the RPMsg
> >> + * device will be deleted.
> >> + */
> >> + ns_ept = rpmsg_create_ept(rpdev, rpmsg_ns_cb, NULL, ns_chinfo);
> >> + if (!ns_ept) {
> >> + dev_err(&rpdev->dev, "failed to create the ns ept\n");
> >> + return -ENOMEM;
> >> + }
> >> + rpdev->ept = ns_ept;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static struct rpmsg_driver rpmsg_ns_driver = {
> >> + .drv.name = "rpmsg_ns",
> >> + .probe = rpmsg_ns_probe,
> >> +};
> >> +
> >> +static int rpmsg_ns_init(void)
> >> +{
> >> + int ret;
> >> +
> >> + ret = register_rpmsg_driver(&rpmsg_ns_driver);
> >> + if (ret < 0)
> >> + pr_err("%s: Failed to register rpmsg driver\n", __func__);
> >> +
> >> + return ret;
> >> +}
> >> +postcore_initcall(rpmsg_ns_init);
> >> +
> >> +static void rpmsg_ns_exit(void)
> >> +{
> >> + unregister_rpmsg_driver(&rpmsg_ns_driver);
> >> +}
> >> +module_exit(rpmsg_ns_exit);
> >> +
> >> +MODULE_DESCRIPTION("Name service announcement rpmsg Driver");
> >> +MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
> >> +MODULE_ALIAS("rpmsg_ns");
> >> +MODULE_LICENSE("GPL v2");
> >> --
> >> 2.17.1
> >>

\
 
 \ /
  Last update: 2020-09-09 00:04    [W:0.068 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site