lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] perf test: Introduce script for Arm CoreSight testing
Hi Mathieu,

On Fri, Sep 04, 2020 at 03:33:32PM -0600, Mathieu Poirier wrote:

[...]

> > diff --git a/tools/perf/tests/shell/test_arm_coresight.sh b/tools/perf/tests/shell/test_arm_coresight.sh
> > new file mode 100755
> > index 000000000000..8696bb5df45a
> > --- /dev/null
> > +++ b/tools/perf/tests/shell/test_arm_coresight.sh
> > @@ -0,0 +1,175 @@
> > +#!/bin/sh
> > +# Check Arm CoreSight trace data recording and branch samples
> > +
> > +# Uses the 'perf record' to record trace data with Arm CoreSight sinks;
> > +# then verify if there have any branch samples and instruction samples
> > +# are generated by CoreSight with 'perf script' and 'perf report'
> > +# commands.
> > +
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Leo Yan <leo.yan@linaro.org>, 2020
> > +
> > +perfdata=$(mktemp /tmp/__perf_test.perf.data.XXXXX)
> > +file=$(mktemp /tmp/temporary_file.XXXXX)
> > +
> > +skip_if_no_cs_etm_event() {
> > + perf list | grep -q 'cs_etm//' && return 0
> > +
> > + # cs_etm event doesn't exist
> > + return 2
> > +}
> > +
> > +skip_if_no_cs_etm_event || exit 2
> > +
> > +record_touch_file() {
> > + echo "Recording trace (only user mode) with path: CPU$2 => $1"
> > + rm -f $file
> > + perf record -o ${perfdata} -e cs_etm/@$1/u --per-thread \
> > + -- taskset -c $2 touch $file
> > +}
> > +
> > +perf_script_branch_samples() {
> > + echo "Looking at perf.data file for dumping branch samples:"
> > +
> > + # Below is an example of the branch samples dumping:
> > + # touch 6512 1 branches:u: ffffb220824c strcmp+0xc (/lib/aarch64-linux-gnu/ld-2.27.so)
> > + # touch 6512 1 branches:u: ffffb22082e0 strcmp+0xa0 (/lib/aarch64-linux-gnu/ld-2.27.so)
> > + # touch 6512 1 branches:u: ffffb2208320 strcmp+0xe0 (/lib/aarch64-linux-gnu/ld-2.27.so)
> > + perf script -F,-time -i ${perfdata} | \
> > + egrep " +$1 +[0-9]+ .* +branches:([u|k]:)? +"
> > +}
> > +
> > +perf_report_branch_samples() {
> > + echo "Looking at perf.data file for reporting branch samples:"
> > +
> > + # Below is an example of the branch samples reporting:
> > + # 73.04% 73.04% touch libc-2.27.so [.] _dl_addr
> > + # 7.71% 7.71% touch libc-2.27.so [.] getenv
> > + # 2.59% 2.59% touch ld-2.27.so [.] strcmp
> > + perf report --stdio -i ${perfdata} | \
> > + egrep " +[0-9]+\.[0-9]+% +[0-9]+\.[0-9]+% +$1 "
> > +}
> > +
> > +perf_report_instruction_samples() {
> > + echo "Looking at perf.data file for instruction samples:"
> > +
> > + # Below is an example of the instruction samples reporting:
> > + # 68.12% touch libc-2.27.so [.] _dl_addr
> > + # 5.80% touch libc-2.27.so [.] getenv
> > + # 4.35% touch ld-2.27.so [.] _dl_fixup
> > + perf report --itrace=i1000i --stdio -i ${perfdata} | \
> > + egrep " +[0-9]+\.[0-9]+% +$1"
> > +}
> > +
> > +arm_cs_iterate_devices() {
> > + for dev in $1/connections/out\:*; do
> > +
> > + # Skip testing if it's not a directory
> > + ! [ -d $dev ] && continue;
> > +
> > + # Read out its symbol link file name
> > + path=`readlink -f $dev`
> > +
> > + # Extract device name from path, e.g.
> > + # path = '/sys/devices/platform/20010000.etf/tmc_etf0'
> > + # `> device_name = 'tmc_etf0'
> > + device_name=`echo $path | awk -F/ '{print $(NF)}'`
> > +
> > +
> > + # If the node of "enable_sink" is existed under the device path, this
> > + # means the device is a sink device. Need to exclude 'tpiu' since it
> > + # cannot support perf PMU.
> > + echo $device_name | egrep -q -v "tpiu"
> > + if [ $? -eq 0 -a -e "$path/enable_sink" ]; then
> > +
> > + pmu_dev="/sys/bus/event_source/devices/cs_etm/sinks/$device_name"
> > +
> > + # Exit if the sink device is supported by PMU or not
> > + if ! [ -f $pmu_dev ]; then
> > + echo "PMU doesn't support $pmu_dev"
> > + exit 1
> > + fi
> > +
> > + record_touch_file $device_name $2 &&
> > + perf_script_branch_samples touch &&
> > + perf_report_branch_samples touch &&
> > + perf_report_instruction_samples touch
>
> Did you want to have an extra tab after the first line? I think it makes the
> code harder to read, but that's a personal opinion.

Thanks for the reviewing! Have removed the extra tab in patch v6.

> > +
> > + err=$?
> > +
> > + # Exit when find failure
> > + [ $err != 0 ] && exit $err
>
> If a problem occurs ${perfdata} and ${file} are not removed. The same is true
> in several instances below.

Have fixed to remove ${perfdata} and ${file} for failure cases in
patch v6.

Thanks,
Leo

\
 
 \ /
  Last update: 2020-09-07 09:33    [W:0.173 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site