lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: sdm845: Fixup OPP table for all qup devices
On Mon, Aug 31, 2020 at 9:04 PM John Stultz <john.stultz@linaro.org> wrote:
> On Wed, Aug 12, 2020 at 3:23 AM Rajendra Nayak <rnayak@codeaurora.org> wrote:
> > This OPP table was based on the clock VDD-FMAX tables seen in
> > downstream code, however it turns out the downstream clock
> > driver does update these tables based on later/production
> > rev of the chip and whats seen in the tables belongs to an
> > early engineering rev of the SoC.
> > Fix up the OPP tables such that it now matches with the
> > production rev of sdm845 SoC.
> >
> > Fixes: 13cadb34e593 ("arm64: dts: sdm845: Add OPP table for all qup
> > devices")
> > Reported-by: John Stultz <john.stultz@linaro.org>
> > Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> > ---
>
> Just wanted to follow up on this, as it's still missing from 5.9-rc3
> and is needed to fix a bluetooth regression on db845c from 5.9-rc1.
>
> Amit has already validated it (on PocoF1 as well), but just in case its useful:
> Tested-by: John Stultz <john.stultz@linaro.org>

Hey Everyone,
Just wanted to nag folks on this again as it is still missing from
upstream and resolves a bluetooth regression from 5.9-rc1.

thanks
-john

\
 
 \ /
  Last update: 2020-09-07 22:39    [W:0.080 / U:1.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site